GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 251 to 500 of 810 total

per page
Page:
  2. 1
  3. 2
  4. 3
  5. 4

Set Ascending Direction

  1. TNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG110304FF KCU10 » 6.35 11.00 0.40 - -
    TNMG110304FF KC5010 » 6.35 11.00 0.40 3.18 2.26
    TNMG-FF

  2. TNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNGP160404 KCU10 » 9.53 16.50 0.40 - -
    TNGP160404 KC5410 » 9.53 16.50 0.40 4.76 3.81
    TNGP

  3. TNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNGG160404FS KCU25 » 9.53 16.50 0.40 4.76 3.81
    TNGG160404FS KCU10 » 9.53 16.50 0.40 - -
    TNGG-FS

  4. TDHH-R

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TDHH07T1204R KCU25 » 4.06 7.04 0.38 1.19 2.39
    TDHH07T1204R KCU10 » 4.06 7.04 0.38 - -
    TDHH07T1204R KC5025 » 4.06 7.04 0.38 1.19 2.39
    TDHH07T1204R KC5010 » 4.06 7.04 0.38 1.19 2.39
    TDHH-R

  5. TDHH-L

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TDHH07T1204L KCU25 » 4.06 7.04 0.38 1.19 2.39
    TDHH07T1204L KCU10 » 4.06 7.04 0.38 - -
    TDHH07T1204L KC5025 » 4.06 7.04 0.38 1.19 2.39
    TDHH07T1204L KC5010 » 4.06 7.04 0.38 1.19 2.39
    TDHH-L

  6. TDHB

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TDHB07T1204 KT315 » 4.06 7.04 0.38 - -
    TDHB07T1204 KCU25 » 4.06 7.04 0.38 1.19 2.39
    TDHB07T1204 KCU10 » 4.06 7.04 0.38 - -
    TDHB07T1204 KC5025 » 4.06 7.04 0.38 1.19 2.39
    TDHB07T1204 KC5010 » 4.06 7.04 0.38 1.19 2.39
    TDHB

  7. TCMT-MP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT16T304MP KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304MP KCP25 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304MP KCM25 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304MP KCM15 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304MP KCK20 » 9.53 16.50 0.40 3.97 4.40
    TCMT-MP

  8. TCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT16T304LF KT315 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KCP30 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KCP25B » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KCP25 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KCP10B » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KCP10 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KCP05 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KCM35 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KCM25 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KCM15 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KCK20 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KCK15 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KCK05 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KC5025 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KC5010 » 9.53 16.50 0.40 3.97 4.40
    TCMT110204LF KT315 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCP30 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCP25B » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCP25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCP10B » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCP10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCP05 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCM35 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCM25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCM15 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCK20 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCK15B » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCK15 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KC5025 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KC5010 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF K68 » 6.35 11.00 0.40 2.38 2.80
    TCMT-LF

  9. TCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT16T304FP KTP10 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304FP KCU25 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304FP KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304FP KCP25 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304FP KCP10 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304FP KCP05 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304FP KCM25 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304FP KCM15 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304FP KCK20 » 9.53 16.50 0.40 3.97 4.40
    TCMT110304FP KCU25 » 6.35 11.00 0.40 3.18 2.80
    TCMT110304FP KCU10 » 6.35 11.00 0.40 3.18 2.80
    TCMT110304FP KCP05 » 6.35 11.00 0.40 3.18 2.80
    TCMT110204FP KU10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KTP10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCU25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCP25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCP10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCP05 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCM25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCM15 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCK20 » 6.35 11.00 0.40 2.38 2.80
    TCMT090204FP KCU25 » 5.56 9.63 0.40 2.38 2.50
    TCMT090204FP KCU10 » 5.56 9.63 0.40 2.38 2.50
    TCMT-FP

  10. TCMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110204UF KCP25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204UF KCP10B » 6.35 11.00 0.40 2.38 2.80
    TCMT110204UF KCP10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204UF KC5010 » 6.35 11.00 0.40 2.38 2.80
    TCMT-UF

  11. TCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT16T304LF KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T304LF KC5410 » 9.53 16.50 0.40 3.97 4.40
    TCGT110204LF KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCGT-LF

  12. TCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT16T304HP KCU25 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T304HP KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T304HP KC5410 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T304HP K313 » 9.53 16.50 0.40 3.97 4.40
    TCGT110204HP KCU25 » 6.35 11.00 0.40 2.38 2.80
    TCGT110204HP KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCGT110204HP KC5410 » 6.35 11.00 0.40 2.38 2.80
    TCGT110204HP K313 » 6.35 11.00 0.40 2.38 2.80
    TCGT-HP

  13. SPMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPMT09T304UF KCP10B » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304UF KCP10 » 9.53 9.53 0.40 3.97 4.40
    SPMT-UF

  14. SPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPMT09T304LF KT315 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304LF KCP25 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304LF KCP10 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304LF KCK20 » 9.53 9.53 0.40 3.97 4.40
    SPMT-LF

  15. SPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPMT09T304FP KCU25 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCU10 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCP25 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCP10 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCM25 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCK20 » 9.53 9.53 0.40 3.97 4.40
    SPMT-FP

  16. SPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPGT09T304LF KCU10 » 9.53 9.53 0.40 - -
    SPGT09T304LF KC5410 » 9.53 9.53 0.40 3.97 4.40
    SPGT-LF

  17. SNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120404FP KCU10 » 12.70 12.70 0.40 - -
    SNMG120404FP KCM15 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FP KC5010 » 12.70 12.70 0.40 4.76 5.16
    SNMG-FP

  18. SNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120404FN KT315 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCP10B » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCP10 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCP05 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCK05 » 12.70 12.70 0.40 4.76 5.16
    SNMG090304FN KT315 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FN KCP25 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FN KCP10 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FN KCK05 » 9.53 9.53 0.40 3.18 3.81
    SNMG-FN

  19. SNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120404FF KT315 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FF KCP10 » 12.70 12.70 0.40 4.76 5.16
    SNMG090304FF KT315 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FF KCP10 » 9.53 9.53 0.40 3.18 3.81
    SNMG-FF

  20. SNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGP120404 KCU10 » 12.70 12.70 0.40 - -
    SNGP120404 KC5410 » 12.70 12.70 0.40 4.76 5.16
    SNGP

  21. SCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT120404LF KCP30 » 12.70 12.70 0.40 4.76 5.50
    SCMT120404LF KCP25 » 12.70 12.70 0.40 4.76 5.50
    SCMT120404LF KCP10 » 12.70 12.70 0.40 4.76 5.50
    SCMT120404LF KCM25 » 12.70 12.70 0.40 4.76 5.50
    SCMT120404LF KCM15 » 12.70 12.70 0.40 4.76 5.50
    SCMT120404LF KCK20 » 12.70 12.70 0.40 4.76 5.50
    SCMT120404LF KCK05 » 12.70 12.70 0.40 4.76 5.50
    SCMT09T304LF KT315 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304LF KCP30 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304LF KCP25B » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304LF KCP25 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304LF KCP10B » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304LF KCP10 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304LF KCP05 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304LF KCM25 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304LF KCM15 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304LF KCK20 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304LF KCK05 » 9.53 9.53 0.40 3.97 4.40
    SCMT-LF

  22. SCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT120404FP KCU25 » 12.70 12.70 0.40 4.76 5.50
    SCMT120404FP KCU10 » 12.70 12.70 0.40 4.76 5.50
    SCMT120404FP KCP25 » 12.70 12.70 0.40 4.76 5.50
    SCMT120404FP KCM25 » 12.70 12.70 0.40 4.76 5.50
    SCMT09T304FP KCU25 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304FP KCU10 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304FP KCP25 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304FP KCP10 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304FP KCM25 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304FP KCM15 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304FP KCK20 » 9.53 9.53 0.40 3.97 4.40
    SCMT-FP

  23. SCMT

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT12040411 KT315 » 12.70 12.70 0.40 4.76 5.50
    SCMT09T30411 KT325 » 9.53 9.53 0.40 - -
    SCMT09T30411 KT315 » 9.53 9.53 0.40 3.97 4.40
    SCMT

  24. DPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT11T304LF KT315 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304LF KCP30 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304LF KCP25B » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304LF KCP25 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304LF KCP10B » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304LF KCP10 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304LF KCP05 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304LF KCM25 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304LF KCM15 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304LF KCK20 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304LF KCK05 » 9.53 11.63 0.40 3.97 4.40
    DPMT070204LF KT315 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCP30 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCP25B » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCP25 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCP10B » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCP10 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCM25 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCM15 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCK20 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCK05 » 6.35 7.75 0.40 2.38 2.80
    DPMT-LF

  25. DPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT11T304FP KTP10 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCU10 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCP25 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCP10 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCM25 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCM15 » 9.53 11.63 0.40 3.97 4.40
    DPMT070204FP KTP10 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCU10 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCP25 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCP10 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCM25 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCM15 » 6.35 7.75 0.40 2.38 2.80
    DPMT-FP

  26. DPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT11T304LF KCU10 » 9.53 11.63 0.40 - -
    DPGT11T304LF KC5410 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304LF KC5025 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304LF KC5010 » 9.53 11.63 0.40 3.97 4.40
    DPGT070204LF KCU10 » 6.35 7.75 0.40 - -
    DPGT070204LF KC5410 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204LF KC5025 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204LF KC5010 » 6.35 7.75 0.40 2.38 2.80
    DPGT-LF

  27. DPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT11T304HP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304HP KCU10 » 9.53 11.63 0.40 - -
    DPGT11T304HP KC5410 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304HP K313 » 9.53 11.63 0.40 3.97 4.40
    DPGT070204HP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204HP KCU10 » 6.35 7.75 0.40 - -
    DPGT070204HP KC5410 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204HP K313 » 6.35 7.75 0.40 2.38 2.80
    DPGT-HP

  28. DNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150604FN KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP25B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCK05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150404FN KT315 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP25B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP10B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCK05 » 12.70 15.50 0.40 4.76 5.16
    DNMG110404FN KT315 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP25B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP25 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP10B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCK05 » 9.53 11.63 0.40 4.76 3.81
    DNMG-FN

  29. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150604FF KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCU10 » 12.70 15.50 0.40 - -
    DNMG150604FF KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150404FF KT315 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FF KCU10 » 12.70 15.50 0.40 - -
    DNMG150404FF KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FF KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG110404FF KT315 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FF KCU10 » 9.53 11.63 0.40 - -
    DNMG110404FF KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FF KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG-FF

  30. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150404CT KCU10 » 12.70 15.50 0.40 - -
    DNMG150404CT KCP25B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG110404CT KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG-CT

Items 251 to 500 of 810 total

per page
Page:
  2. 1
  3. 2
  4. 3
  5. 4

Set Ascending Direction
Newsletter
Shop By

Currently Shopping by:

  1. ISO Insert Range: Beyond Premium Remove This Item
  2. Type of Cut: Finishing Remove This Item
  3. Radius°: 0.40 Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (810)
Material Machining
  1. Steel (555)
  2. Stainless Steel (315)
  3. Cast Iron (302)
  4. Aluminium (30)
  5. HRSA (259)
  6. Universal (217)
Insert Type
  1. Negative (177)
  2. Positive (633)
Type of Cut
  1. Fine Finishing (10)
  2. Wiper Finishing (69)
  3. Medium (180)
  4. Wiper Medium (23)
  5. Rough Positive (8)
  6. Rough (31)
Tip Style
  1. CCGT (21)
  2. CCMT (76)
  3. CCMW (2)
  4. CDHBS (6)
  5. CDHHS (8)
  6. CNGG (6)
  7. CNGP (4)
  8. CNMA (1)
  9. CNMG (15)
  10. CPGH (6)
  11. CPGT (10)
  12. CPMT (62)
  13. DCGT (8)
  14. DCMT (70)
  15. DNGG (9)
  16. DNGP (6)
  17. DNMG (41)
  18. DPGT (16)
  19. DPMT (35)
  20. SCMT (32)
  21. SNGP (2)
  22. SNMG (16)
  23. SPGT (2)
  24. SPMT (12)
  25. TCGT (11)
  26. TCMT (64)
  27. TDHB (5)
  28. TDHH (8)
  29. TNGG (2)
  30. TNGP (2)
  31. TNMG (30)
  32. TPCB (3)
  33. TPCG (3)
  34. TPCH (1)
  35. TPGH (6)
  36. TPGT (17)
  37. TPMT (57)
  38. VBGT (17)
  39. VBMT (49)
  40. VNGG (6)
  41. VNGP (1)
  42. VNMG (15)
  43. WCMT (5)
  44. WNGG (3)
  45. WNMG (18)
  46. WPMT (17)
  47. WPMTS (4)
Radius°
  1. 0.05 (12)
  2. 0.10 (54)
  3. 0.20 (245)
  4. 0.34 (2)
  5. 0.74 (6)
  6. 0.80 (759)
  7. 1.14 (7)
  8. 1.20 (129)
  9. 1.60 (12)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...