Kennametal Carbide Turning Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

Achieve higher metal removal rates
(speed, feed, and depth of cut).
Gain longer tool life.

Reliability

Deliver uniform wear for predictable tool life.
Achieve reduced depth-of-cut notching.
Virtually eliminate chip flow damage.

Versatility

Products can be applied across a wide range of applications.
Can be used in low- to high-speed applications.

Complete Portfolio

The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Click through to the products to see videos of them in action, and also find their related matching tools.

CNMG-FF

Negative ISO insert for Fine Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMG090308FF KC5010 »	9.53	9.67	0.80	3.18	3.81
CNMG090308FF KCP10 »	9.53	9.67	0.80	3.18	3.81
CNMG090308FF KCU10 »	9.53	9.67	0.80	-	-
CNMG120408FF KC5010 »	12.70	12.90	0.80	4.76	5.16
CNMG120408FF KCP05 »	12.70	12.90	0.80	4.76	5.16
CNMG120408FF KCP10 »	12.70	12.90	0.80	4.76	5.16
CNMG120408FF KCP10B »	12.70	12.90	0.80	4.76	5.16
CNMG120408FF KCU10 »	12.70	12.90	0.80	-	-
CNMG120408FF KT315 »	12.70	12.90	0.80	4.76	5.16

CNMG-FN

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMG090308FN KCK05 »	9.53	9.67	0.80	3.18	3.81
CNMG090308FN KCP10 »	9.53	9.67	0.80	3.18	3.81
CNMG090308FN KT315 »	9.53	9.67	0.80	3.18	3.81
CNMG120408FN KCK05 »	12.70	12.90	0.80	4.76	5.16
CNMG120408FN KCP05 »	12.70	12.90	0.80	4.76	5.16
CNMG120408FN KCP10 »	12.70	12.90	0.80	4.76	5.16
CNMG120408FN KCP10B »	12.70	12.90	0.80	4.76	5.16
CNMG120408FN KCP25 »	12.70	12.90	0.80	4.76	5.16
CNMG120408FN KCP25B »	12.70	12.90	0.80	4.76	5.16
CNMG120408FN KT315 »	12.70	12.90	0.80	4.76	5.16

CNMG-MN

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
CNMG090308MN KCP10 »	9.53	9.67	0.80	3.18	3.81
CNMG090308MN KCP10B »	9.53	9.67	0.80	3.18	3.81
CNMG090308MN KCP25 »	9.53	9.67	0.80	3.18	3.81
CNMG090308MN KCP25B »	9.53	9.67	0.80	3.18	3.81
CNMG090308MN KCP30 »	9.53	9.67	0.80	3.18	3.81
CNMG120408MN KCP05 »	12.70	12.90	0.80	4.76	5.16
CNMG120408MN KCP10 »	12.70	12.90	0.80	4.76	5.16
CNMG120408MN KCP10B »	12.70	12.90	0.80	4.76	5.16
CNMG120408MN KCP25 »	12.70	12.90	0.80	4.76	5.16
CNMG120408MN KCP25B »	12.70	12.90	0.80	4.76	5.16
CNMG120408MN KCP30 »	12.70	12.90	0.80	4.76	5.16
CNMG120408MN KCP40 »	12.70	12.90	0.80	4.76	5.16
CNMG160608MN KCP10 »	15.88	16.12	0.80	6.35	6.35
CNMG160608MN KCP10B »	15.88	16.12	0.80	6.35	6.35
CNMG160608MN KCP25 »	15.88	16.12	0.80	6.35	6.35
CNMG160608MN KCP25B »	15.88	16.12	0.80	6.35	6.35
CNMG160608MN KCP30 »	15.88	16.12	0.80	6.35	6.35
CNMG190608MN KCP10 »	19.05	19.34	0.80	6.35	7.93
CNMG190608MN KCP25 »	19.05	19.34	0.80	6.35	7.93
CNMG190608MN KCP25B »	19.05	19.34	0.80	6.35	7.93
CNMG190608MN KCP30 »	19.05	19.34	0.80	6.35	7.93

CNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
CNMG090308MP KC5010 »	9.53	9.67	0.80	3.18	3.81
CNMG090308MP KCM15 »	9.53	9.67	0.80	3.18	3.81
CNMG090308MP KCM25 »	9.53	9.67	0.80	3.18	3.81
CNMG090308MP KCU10 »	9.53	9.67	0.80	-	-
CNMG120408MP KC5010 »	12.70	12.90	0.80	4.76	5.16
CNMG120408MP KCM15 »	12.70	12.90	0.80	4.76	5.16
CNMG120408MP KCM25 »	12.70	12.90	0.80	4.76	5.16
CNMG120408MP KCM35 »	12.70	12.90	0.80	4.76	5.16
CNMG120408MP KCP25 »	12.70	12.90	0.80	4.76	5.16
CNMG120408MP KCP25B »	12.70	12.90	0.80	4.76	5.16
CNMG120408MP KCU10 »	12.70	12.90	0.80	-	-
CNMG120408MP KCU25 »	12.70	12.90	0.80	4.76	5.16
CNMG160608MP KC5010 »	15.88	16.12	0.80	6.35	6.35
CNMG160608MP KCM15 »	15.88	16.12	0.80	6.35	6.35
CNMG160608MP KCM25 »	15.88	16.12	0.80	6.35	6.35
CNMG160608MP KCM35 »	15.88	16.12	0.80	6.35	6.35
CNMG160608MP KCU10 »	15.88	16.12	0.80	-	-
CNMG190608MP KC5010 »	19.05	19.34	0.80	6.35	7.93
CNMG190608MP KCM15 »	19.05	19.34	0.80	6.35	7.93
CNMG190608MP KCM25 »	19.05	19.34	0.80	6.35	7.93
CNMG190608MP KCU10 »	19.05	19.34	0.80	-	-

CNMG-CT

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMG120408CT KC5010 »	12.70	12.90	0.80	4.76	5.16
CNMG120408CT KCP05 »	12.70	12.90	0.80	4.76	5.16
CNMG120408CT KCP10 »	12.70	12.90	0.80	4.76	5.16
CNMG120408CT KCP10B »	12.70	12.90	0.80	4.76	5.16
CNMG120408CT KCP25 »	12.70	12.90	0.80	4.76	5.16
CNMG120408CT KCP25B »	12.70	12.90	0.80	4.76	5.16
CNMG120408CT KCU10 »	12.70	12.90	0.80	-	-

CNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMG120408FP KC5010 »	12.70	12.90	0.80	4.76	5.16
CNMG120408FP KCM15 »	12.70	12.90	0.80	4.76	5.16
CNMG120408FP KCP10 »	12.70	12.90	0.80	4.76	5.16
CNMG120408FP KCP10B »	12.70	12.90	0.80	4.76	5.16
CNMG120408FP KCP25 »	12.70	12.90	0.80	4.76	5.16
CNMG120408FP KCP25B »	12.70	12.90	0.80	4.76	5.16
CNMG120408FP KCU10 »	12.70	12.90	0.80	-	-
CNMG120408FP KT315 »	12.70	12.90	0.80	4.76	5.16

CNMG-FW

Negative ISO insert for Wiper Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMG120408FW KCP05 »	12.70	12.90	0.80	4.76	5.16
CNMG120408FW KCP10 »	12.70	12.90	0.80	4.76	5.16
CNMG120408FW KCP10B »	12.70	12.90	0.80	4.76	5.16
CNMG120408FW KCU10 »	12.70	12.90	0.80	-	-
CNMG120408FW KT315 »	12.70	12.90	0.80	4.76	5.16

CNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
CNMG120408MS K313 »	12.70	12.90	0.80	4.76	5.16
CNMG120408MS KCU10 »	12.70	12.90	0.80	-	-
CNMG120408MS KCU25 »	12.70	12.90	0.80	4.76	5.16
CNMG160608MS KCU10 »	15.88	16.12	0.80	-	-
CNMG160608MS KCU25 »	15.88	16.12	0.80	6.35	6.35
CNMG190608MS KCU10 »	19.05	19.34	0.80	-	-
CNMG190608MS KCU25 »	19.05	19.34	0.80	6.35	7.93

CNMG-MW

Negative ISO insert for Wiper Medium machining.

Product Code	D	L10	Rε	S	D1
CNMG120408MW KCP05 »	12.70	12.90	0.80	4.76	5.16
CNMG120408MW KCP10 »	12.70	12.90	0.80	4.76	5.16
CNMG120408MW KCP10B »	12.70	12.90	0.80	4.76	5.16
CNMG120408MW KCP25 »	12.70	12.90	0.80	4.76	5.16
CNMG120408MW KCP25B »	12.70	12.90	0.80	4.76	5.16

CNMG-RN

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
CNMG120408RN KCP05 »	12.70	12.90	0.80	4.76	5.16
CNMG120408RN KCP10 »	12.70	12.90	0.80	4.76	5.16
CNMG120408RN KCP10B »	12.70	12.90	0.80	4.76	5.16
CNMG120408RN KCP25 »	12.70	12.90	0.80	4.76	5.16
CNMG120408RN KCP25B »	12.70	12.90	0.80	4.76	5.16
CNMG120408RN KCP30 »	12.70	12.90	0.80	4.76	5.16
CNMG120408RN KCP40 »	12.70	12.90	0.80	4.76	5.16
CNMG160608RN KCP10 »	15.88	16.12	0.80	6.35	6.35
CNMG160608RN KCP10B »	15.88	16.12	0.80	6.35	6.35
CNMG160608RN KCP25 »	15.88	16.12	0.80	6.35	6.35
CNMG160608RN KCP25B »	15.88	16.12	0.80	6.35	6.35
CNMG160608RN KCP30 »	15.88	16.12	0.80	6.35	6.35
CNMG190608RN KCP10 »	19.05	19.34	0.80	6.35	7.93
CNMG190608RN KCP10B »	19.05	19.34	0.80	6.35	7.93
CNMG190608RN KCP25 »	19.05	19.34	0.80	6.35	7.93
CNMG190608RN KCP25B »	19.05	19.34	0.80	6.35	7.93
CNMG190608RN KCP40 »	19.05	19.34	0.80	6.35	7.93

CNMG-RP

Negative ISO insert for Rough Positive machining.

Product Code	D	L10	Rε	S	D1
CNMG120408RP KCK05 »	12.70	12.90	0.80	4.76	5.16
CNMG120408RP KCK15 »	12.70	12.90	0.80	4.76	5.16
CNMG120408RP KCK15B »	12.70	12.90	0.80	4.76	5.16
CNMG120408RP KCK20 »	12.70	12.90	0.80	4.76	5.16
CNMG120408RP KCM15 »	12.70	12.90	0.80	4.76	5.16
CNMG120408RP KCM25 »	12.70	12.90	0.80	4.76	5.16
CNMG120408RP KCM35 »	12.70	12.90	0.80	4.76	5.16
CNMG120408RP KCP05 »	12.70	12.90	0.80	4.76	5.16
CNMG120408RP KCP10 »	12.70	12.90	0.80	4.76	5.16
CNMG120408RP KCP10B »	12.70	12.90	0.80	4.76	5.16
CNMG120408RP KCP25 »	12.70	12.90	0.80	4.76	5.16
CNMG120408RP KCP25B »	12.70	12.90	0.80	4.76	5.16
CNMG120408RP KCP30 »	12.70	12.90	0.80	4.76	5.16
CNMG120408RP KCP40 »	12.70	12.90	0.80	4.76	5.16
CNMG120408RP KCU10 »	12.70	12.90	0.80	-	-
CNMG120408RP KCU25 »	12.70	12.90	0.80	-	-
CNMG160608RP KC5510 »	15.88	16.12	0.80	6.35	6.35
CNMG160608RP KCK20 »	15.88	16.12	0.80	6.35	6.35
CNMG160608RP KCM15 »	15.88	16.12	0.80	6.35	6.35
CNMG160608RP KCP10 »	15.88	16.12	0.80	6.35	6.35
CNMG160608RP KCP25 »	15.88	16.12	0.80	6.35	6.35
CNMG160608RP KCP25B »	15.88	16.12	0.80	6.35	6.35
CNMG160608RP KCU10 »	15.88	16.12	0.80	-	-
CNMG160608RP KCU25 »	15.88	16.12	0.80	6.35	6.35

CNMG-UN

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
CNMG120408UN KCK05 »	12.70	12.90	0.80	4.76	5.16
CNMG120408UN KCK15 »	12.70	12.90	0.80	4.76	5.16
CNMG120408UN KCK15B »	12.70	12.90	0.80	4.76	5.16
CNMG120408UN KCK20 »	12.70	12.90	0.80	4.76	5.16
CNMG160608UN KCK05 »	15.88	16.12	0.80	6.35	6.35
CNMG160608UN KCK15 »	15.88	16.12	0.80	6.35	6.35
CNMG160608UN KCK15B »	15.88	16.12	0.80	6.35	6.35
CNMG160608UN KCK20 »	15.88	16.12	0.80	6.35	6.35
CNMG190608UN KCK05 »	19.05	19.34	0.80	6.35	7.93
CNMG190608UN KCK15 »	19.05	19.34	0.80	6.35	7.93
CNMG190608UN KCK15B »	19.05	19.34	0.80	6.35	7.93
CNMG190608UN KCK20 »	19.05	19.34	0.80	6.35	7.93

CNMG-UP

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
CNMG120408UP KCM15 »	12.70	12.90	0.80	4.76	5.16
CNMG120408UP KCM25 »	12.70	12.90	0.80	4.76	5.16
CNMG120408UP KCM35 »	12.70	12.90	0.80	4.76	5.16
CNMG160608UP KCM15 »	15.88	16.12	0.80	6.35	6.35
CNMG160608UP KCM25 »	15.88	16.12	0.80	6.35	6.35
CNMG160608UP KCM35 »	15.88	16.12	0.80	6.35	6.35
CNMG190608UP KCM15 »	19.05	19.34	0.80	6.35	7.93
CNMG190608UP KCM25 »	19.05	19.34	0.80	6.35	7.93

CNMG

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
CNMG190608 KCP25 »	19.05	19.34	0.80	6.35	7.93
CNMG190608 KCP40 »	19.05	19.34	0.80	6.35	7.93