GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

Kennametal Carbide Turning Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Click through to the products to see videos of them in action, and also find their related matching tools.

Items 1 to 250 of 5243 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Ascending Direction

  1. WPMTS-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WPMTS3T104LF KC5025 » 4.76 3.25 0.40 1.98 2.15
    WPMTS3T104LF KC5010 » 4.76 3.25 0.40 1.98 2.15
    WPMTS-LF

  2. WPMTS-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WPMTS3T104FP KCU10 » 4.76 3.25 0.40 1.98 2.15
    WPMTS3T104FP KCP25 » 4.76 3.25 0.40 1.98 2.15
    WPMTS-FP

  3. WPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WPMT06T308LF KCP25B » 9.53 6.52 0.80 3.97 4.40
    WPMT06T308LF KCP25 » 9.53 6.52 0.80 3.97 4.40
    WPMT06T308LF KCP10 » 9.53 6.52 0.80 3.97 4.40
    WPMT06T308LF KCM25 » 9.53 6.52 0.80 3.97 4.40
    WPMT06T308LF KCM15 » 9.53 6.52 0.80 3.97 4.40
    WPMT06T308LF KCK20 » 9.53 6.52 0.80 3.97 4.40
    WPMT06T308LF KCK05 » 9.53 6.52 0.80 3.97 4.40
    WPMT06T308LF KC5025 » 9.53 6.52 0.80 3.97 4.40
    WPMT06T308LF KC5010 » 9.53 6.52 0.80 3.97 4.40
    WPMT06T304LF KCP25 » 9.53 6.52 0.40 3.97 4.40
    WPMT06T304LF KCP10 » 9.53 6.52 0.40 3.97 4.40
    WPMT06T304LF KCM25 » 9.53 6.52 0.40 3.97 4.40
    WPMT06T304LF KCM15 » 9.53 6.52 0.40 3.97 4.40
    WPMT06T304LF KCK20 » 9.53 6.52 0.40 3.97 4.40
    WPMT040204LF KCP10 » 6.35 4.34 0.40 2.38 2.90
    WPMT040204LF KCK20 » 6.35 4.34 0.40 2.38 2.90
    WPMT040204LF KCK05 » 6.35 4.34 0.40 2.38 2.90
    WPMT040204LF KC5025 » 6.35 4.34 0.40 2.38 2.90
    WPMT040204LF KC5010 » 6.35 4.34 0.40 2.38 2.90
    WPMT-LF

  4. WPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WPMT06T308FP KCU10 » 9.53 6.52 0.80 3.97 4.40
    WPMT06T308FP KCP25 » 9.53 6.52 0.80 3.97 4.40
    WPMT06T308FP KCP10 » 9.53 6.52 0.80 3.97 4.40
    WPMT06T308FP KCM25 » 9.53 6.52 0.80 3.97 4.40
    WPMT06T304FP KCU10 » 9.53 6.52 0.40 3.97 4.40
    WPMT06T304FP KCP10 » 9.53 6.52 0.40 3.97 4.40
    WPMT06T304FP KCM25 » 9.53 6.52 0.40 3.97 4.40
    WPMT06T304FP KCM15 » 9.53 6.52 0.40 3.97 4.40
    WPMT040204FP KCU10 » 6.35 4.34 0.40 2.38 2.80
    WPMT040204FP KCP25 » 6.35 4.34 0.40 2.38 2.80
    WPMT040204FP KCM25 » 6.35 4.34 0.40 2.38 2.80
    WPMT-FP

  5. WPGTS-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WPGTS30102UF KCU10 » 4.76 3.26 0.20 - -
    WPGTS30102UF KC5010 » 4.76 3.26 0.20 1.59 2.16
    WPGTS30101UF KCU10 » 4.76 3.26 0.10 - -
    WPGTS30101UF KC5010 » 4.76 3.26 0.10 1.59 2.16
    WPGTS-UF

  6. WPGT-UF

    Positive ISO insert for Finishing machining.

    Product Code  
    WPGT040202UF KCU10 »
    WPGT040202UF KC5010 »
    WPGT040201UF KC5010 »
    WPGT-UF

  7. WNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    WNMG080416UN KCK20 » 12.70 8.69 1.60 4.76 5.16
    WNMG080416UN KCK15B » 12.70 8.69 1.60 4.76 5.16
    WNMG080416UN KCK15 » 12.70 8.69 1.60 4.76 5.16
    WNMG080412UN KCK20 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412UN KCK15B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412UN KCK15 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412UN KCK05 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408UN KCK20 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408UN KCK15B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408UN KCK15 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408UN KCK05 » 12.70 8.69 0.80 4.76 5.16
    WNMG080404UN KCK20 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404UN KCK15 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404UN KCK05 » 12.70 8.69 0.40 4.76 5.16
    WNMG060412UN KCK20 » 9.53 6.52 1.20 4.76 3.81
    WNMG060412UN KCK15 » 9.53 6.52 1.20 4.76 3.81
    WNMG060412UN KCK05 » 9.53 6.52 1.20 4.76 3.81
    WNMG-UN

  8. WNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    WNMG080416RP KCU25 » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RP KCU10 » - - - - -
    WNMG080416RP KCP30 » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RP KCP25B » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RP KCP25 » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RP KCP10B » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RP KCP10 » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RP KCP05 » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RP KCK20 » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RP KC5525 » 12.70 8.69 1.60 4.76 5.16
    WNMG080412RP KCU25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCU10 » 12.70 8.69 1.20 - -
    WNMG080412RP KCP40 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCP30 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCP25B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCP25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCP10B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCP10 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCP05 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCM35 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCM25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCM15 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCK20 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCK15B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCK15 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCK05 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408RP KCU25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCU10 » 12.70 8.69 0.80 - -
    WNMG080408RP KCP40 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCP30 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCP25B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCP25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCP10B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCP05 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCM35 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCM25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCM15 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCK20 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCK15B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCK15 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCK05 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MS KCU10 » - - - - -
    WNMG080404MS KCU10 » - - - - -
    WNMG080402MS KCU10 » - - - - -
    WNMG080401MS KCU10 » - - - - -
    WNMG-RP

  9. WNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    WNMG080416RN KCP30 » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RN KCP25B » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RN KCP25 » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RN KCP10B » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RN KCP10 » 12.70 8.69 1.60 4.76 5.16
    WNMG080412RN KCP40 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RN KCP30 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RN KCP25B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RN KCP25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RN KCP10B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RN KCP10 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RN KCP05 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408RN KCP40 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RN KCP30 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RN KCP25B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RN KCP25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RN KCP10B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RN KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RN KCP05 » 12.70 8.69 0.80 4.76 5.16
    WNMG-RN

  10. WNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    WNMG080416MN KCP25B » 12.70 8.69 1.60 4.76 5.16
    WNMG080416MN KCP25 » 12.70 8.69 1.60 4.76 5.16
    WNMG080412MN KCP40 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MN KCP25B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MN KCP25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MN KCP10B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MN KCP10 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MN KCP05 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408MN KCP40 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MN KCP30 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MN KCP25B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MN KCP25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MN KCP10B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MN KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MN KCP05 » 12.70 8.69 0.80 4.76 5.16
    WNMG-MN

  11. WNMG-H

    Negative ISO Select Inserts for Tough grade, interruped cut machining.

    Product Code D L10 Rε  
    WNMG080416H K35P » 12.70 8.69 1.60
    WNMG080416H K25P » 12.70 8.69 1.60
    WNMG080416H K20K » 12.70 8.69 1.60
    WNMG080412H K35P » 12.70 8.69 1.20
    WNMG080412H K25P » 12.70 8.69 1.20
    WNMG080412H K20K » 12.70 8.69 1.20
    WNMG080412H K10P » 12.70 8.69 1.20
    WNMG080408H K35P » 12.70 8.69 0.80
    WNMG080408H K25P » 12.70 8.69 0.80
    WNMG080408H K20K » 12.70 8.69 0.80
    WNMG080408H K10P » 12.70 8.69 0.80
    WNMG-H

  12. WNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    WNMG080412UP KCU10 » 12.70 8.69 1.20 - -
    WNMG080412UP KCM35 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412UP KCM25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412UP KCM15 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408UP KCU10 » 12.70 8.69 0.80 - -
    WNMG080408UP KCM35 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408UP KCM25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408UP KCM15 » 12.70 8.69 0.80 4.76 5.16
    WNMG-UP

  13. WNMG-R

    Negative ISO Select Inserts for Tough grade, interruped cut machining.

    Product Code D L10 Rε  
    WNMG080412R K35P » 12.70 8.69 1.20
    WNMG080412R K25P » 12.70 8.69 1.20
    WNMG080412R K25M » 12.70 8.69 1.20
    WNMG080412R K10P » 12.70 8.69 1.20
    WNMG080412R K10M » 12.70 8.69 1.20
    WNMG080408R K35P » 12.70 8.69 0.80
    WNMG080408R K25P » 12.70 8.69 0.80
    WNMG080408R K25M » 12.70 8.69 0.80
    WNMG080408R K10P » 12.70 8.69 0.80
    WNMG080408R K10M » 12.70 8.69 0.80
    WNMG-R

  14. WNMG-MW

    Negative ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    WNMG080412MW KCP25B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MW KCP25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MW KCP10B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MW KCP10 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MW KCP05 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408MW KCP25B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MW KCP25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MW KCP10B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MW KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MW KCP05 » 12.70 8.69 0.80 4.76 5.16
    WNMG-MW

  15. WNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    WNMG080412MP KCU10 » 12.70 8.69 1.20 - -
    WNMG080412MP KCP10 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MP KCM35 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MP KCM25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408MP KCU10 » 12.70 8.69 0.80 - -
    WNMG080408MP KCP25B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MP KCP25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MP KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MP KCM35 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MP KCM25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MP KCM15 » 12.70 8.69 0.80 4.76 5.16
    WNMG-MP

  16. WNMG-M

    Negative ISO Select Inserts for General purpose machining.

    Product Code D L10 Rε  
    WNMG080412M K25M » 12.70 8.69 1.20
    WNMG080408M K25M » 12.70 8.69 0.80
    WNMG080408M K10M » 12.70 8.69 0.80
    WNMG080404M K25M » 12.70 8.69 0.40
    WNMG080404M K10M » 12.70 8.69 0.40
    WNMG-M

  17. WNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080412FW KT315 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412FW KCP10B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412FW KCP10 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412FW KCP05 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412FW KC5010 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408FW KT315 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FW KCU10 » 12.70 8.69 0.80 - -
    WNMG080408FW KCP10B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FW KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FW KCP05 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FW KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080404FW KCU10 » 12.70 8.69 0.40 - -
    WNMG080404FW KCP10 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FW KCP05 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FW KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNMG-FW

  18. WNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080412FP KCM15 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412FP KC5010 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408FP KT315 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FP KCU10 » 12.70 8.69 0.80 - -
    WNMG080408FP KCP25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FP KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FP KCM15 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FP KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080404FP KT315 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FP KCU10 » 12.70 8.69 0.40 - -
    WNMG080404FP KCP25 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FP KCP10 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FP KCM15 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FP KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNMG-FP

  19. WNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    WNMG080408MS KCU25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MS K313 » 12.70 8.69 0.80 4.76 5.16
    WNMG080404MS KCU25 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404MS K313 » 12.70 8.69 0.40 4.76 5.16
    WNMG080402MS KCU25 » 12.70 8.69 0.20 4.76 5.16
    WNMG080402MS KC5525 » 12.70 8.69 0.20 4.76 5.16
    WNMG-MS

  20. WNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080408FF KT315 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FF KCU10 » 12.70 8.69 0.80 - -
    WNMG080408FF KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FF KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080404FF KT315 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FF KCU10 » 12.70 8.69 0.40 - -
    WNMG080404FF KCP10 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FF KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNMG-FF

  21. WNMG-F

    Negative ISO Select Inserts for General purpose machining.

    Product Code D L10 Rε  
    WNMG080408F K25P » 12.70 8.69 0.80
    WNMG080408F K20K » 12.70 8.69 0.80
    WNMG080408F K15U » 12.70 8.69 0.80
    WNMG080408F K10U » 12.70 8.69 0.80
    WNMG080408F K10P » 12.70 8.69 0.80
    WNMG080408F K10M » 12.70 8.69 0.80
    WNMG080404F K25P » 12.70 8.69 0.40
    WNMG080404F K25M » 12.70 8.69 0.40
    WNMG080404F K20K » 12.70 8.69 0.40
    WNMG080404F K15U » 12.70 8.69 0.40
    WNMG080404F K10U » 12.70 8.69 0.40
    WNMG080404F K10P » 12.70 8.69 0.40
    WNMG080404F K10M » 12.70 8.69 0.40
    WNMG-F

Items 1 to 250 of 5243 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Ascending Direction
Newsletter
Shop By

Shopping Options

Category
  1. ISO Beyond Inserts (4611)
  2. ISO Select Inserts (632)
Manufacturer
  1. Kennametal (5243)
ISO Insert Range
  1. Beyond Premium (4611)
  2. Select Contract (632)
Material Machining
  1. Steel (3243)
  2. Stainless Steel (1675)
  3. Cast Iron (1693)
  4. Aluminium (127)
  5. HRSA (1268)
  6. Universal (920)
Insert Type
  1. Negative (3049)
  2. Positive (2194)
Type of Cut
  1. Fine Finishing (58)
  2. Roughing (8)
  3. Finishing (2362)
  4. Wiper Finishing (146)
  5. Medium (1091)
  6. Wiper Medium (86)
  7. Medium Roughing (5)
  8. Rough Positive (184)
  9. Rough (1029)
  10. Rough Single Sided (274)
Tip Style
  1. CCGT (58)
  2. CCGT-F (13)
  3. CCMT (293)
  4. CCMT-F (47)
  5. CCMW (5)
  6. CDG (6)
  7. CDHBS (21)
  8. CDHHS (18)
  9. CDT (2)
  10. CNGG (30)
  11. CNGP (22)
  12. CNMA (35)
  13. CNMG (492)
  14. CNMG-F (19)
  15. CNMG-H (32)
  16. CNMG-M (10)
  17. CNMG-R (26)
  18. CNMM (130)
  19. CPG (2)
  20. CPGH (22)
  21. CPGT (32)
  22. CPMT (182)
  23. DCGT (26)
  24. DCGT-F (4)
  25. DCMT (202)
  26. DCMT-F (34)
  27. DNGG (23)
  28. DNGP (30)
  29. DNMA (21)
  30. DNMG (474)
  31. DNMG-F (32)
  32. DNMG-H (20)
  33. DNMG-M (10)
  34. DNMG-R (31)
  35. DNMM (26)
  36. DNMS (2)
  37. DPGT (48)
  38. DPMT (82)
  39. RCGH (4)
  40. RCGT (22)
  41. RCGX (2)
  42. RCMT (68)
  43. RNMA (6)
  44. RNMG (28)
  45. RNMG-H (4)
  46. RPGT (3)
  47. SCMT (145)
  48. SCMT-F (19)
  49. SCMW (4)
  50. SNGG (7)
  51. SNGP (4)
  52. SNMA (27)
  53. SNMG (288)
  54. SNMG-F (10)
  55. SNMG-H (23)
  56. SNMG-M (4)
  57. SNMG-R (21)
  58. SNMM (84)
  59. SNMS (5)
  60. SPGT (4)
  61. SPMT (51)
  62. TCGT (28)
  63. TCGT-F (8)
  64. TCMT (197)
  65. TCMT-F (33)
  66. TCMW (2)
  67. TDHB (18)
  68. TDHH (14)
  69. TNGG (8)
  70. TNGP (10)
  71. TNMA (25)
  72. TNMG (342)
  73. TNMG-F (25)
  74. TNMG-H (26)
  75. TNMG-M (10)
  76. TNMG-R (22)
  77. TNMM (34)
  78. TNMP (12)
  79. TNMS (5)
  80. TPCB (11)
  81. TPCG (7)
  82. TPCH (4)
  83. TPGH (10)
  84. TPGT (45)
  85. TPMT (151)
  86. VBGT (39)
  87. VBGT-F (10)
  88. VBMT (116)
  89. VBMT-F (33)
  90. VNGG (23)
  91. VNGP (16)
  92. VNMA (1)
  93. VNMG (128)
  94. VNMG-F (13)
  95. VNMG-M (4)
  96. VNMG-R (4)
  97. VNMP (8)
  98. VNMS (9)
  99. WCMT (10)
  100. WNGG (9)
  101. WNMA (18)
  102. WNMG (255)
  103. WNMG-F (13)
  104. WNMG-H (11)
  105. WNMG-M (5)
  106. WNMG-R (14)
  107. WPGT (3)
  108. WPGTS (4)
  109. WPMT (30)
  110. WPMTS (4)
Radius°
  1. 0.00 (4)
  2. 0.05 (12)
  3. 0.10 (78)
  4. 0.20 (298)
  5. 0.34 (2)
  6. 0.40 (1307)
  7. 0.74 (6)
  8. 0.80 (1853)
  9. 1.14 (7)
  10. 1.20 (1032)
  11. 1.60 (387)
  12. 2.40 (92)
  13. 3.20 (6)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...