GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

Kennametal Carbide Turning Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Click through to the products to see videos of them in action, and also find their related matching tools.

180 Item(s)

per page

Set Descending Direction

  1. CCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCGT060208HP KCU25 » 6.35 6.45 0.80 2.38 2.80
    CCGT120408HP KCU10 » 12.70 12.90 0.80 - -
    CCGT120408HP KCU25 » 12.70 12.90 0.80 4.76 5.50
    CCGT-HP

  2. CCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCGT060208LF KC5010 » 6.35 6.45 0.80 2.38 2.80
    CCGT060208LF KCU10 » 6.35 6.45 0.80 - -
    CCGT09T308LF KC5025 » 9.53 9.67 0.80 3.97 4.40
    CCGT09T308LF KCU10 » 9.53 9.67 0.80 - -
    CCGT-LF

  3. CCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCMT060208FP KCU10 » 6.35 6.45 0.80 2.38 2.80
    CCMT060208FP KCU25 » 6.35 6.45 0.80 2.38 2.80
    CCMT09T308FP KCU10 » 9.53 9.67 0.80 3.97 4.40
    CCMT09T308FP KCU25 » 9.53 9.67 0.80 3.97 4.40
    CCMT120408FP KCU10 » 12.70 12.90 0.80 4.76 5.50
    CCMT120408FP KCU25 » 12.70 12.90 0.80 4.76 5.50
    CCMT-FP

  4. CNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120408FS KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNGG-FS

  5. CNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120408LF KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNGG120408LF KCU10 » 12.70 12.90 0.80 - -
    CNGG160608LF KC5010 » 15.88 16.12 0.80 6.35 6.35
    CNGG160608LF KCU10 » 15.88 16.12 0.80 - -
    CNGG-LF

  6. CNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    CNGP120408 KCU10 » 12.70 12.90 0.80
    CNGP

  7. CNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120408CT KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCU10 » 12.70 12.90 0.80 - -
    CNMG-CT

  8. CNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120408FP KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCU10 » 12.70 12.90 0.80 - -
    CNMG-FP

  9. CPGH

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPGH09T308 KC5010 » 9.53 9.67 0.80 3.97 4.40
    CPGH09T308 KC5025 » 9.53 9.67 0.80 3.97 4.40
    CPGH09T308 KCU10 » 9.53 9.67 0.80 - -
    CPGH09T308 KCU25 » 9.53 9.67 0.80 3.97 4.40
    CPGH

  10. CPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPGT060208HP KCU10 » 6.35 6.45 0.80 - -
    CPGT060208HP KCU25 » 6.35 6.45 0.80 2.38 2.80
    CPGT09T308HP KCU10 » 9.53 9.67 0.80 - -
    CPGT09T308HP KCU25 » 9.53 9.67 0.80 3.97 4.40
    CPGT-HP

  11. CPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    CPGT060208LF KCU10 » 6.35 6.45 0.80
    CPGT09T308LF KCU10 » 9.53 9.67 0.80
    CPGT-LF

  12. CPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT060208FP KCU10 » 6.35 6.45 0.80 2.38 2.80
    CPMT060208FP KCU25 » 6.35 6.45 0.80 2.38 2.80
    CPMT09T308FP KCU10 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308FP KCU25 » 9.53 9.67 0.80 3.97 4.40
    CPMT-FP

  13. DCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCGT070208HP KCU10 » 6.35 7.75 0.80 - -
    DCGT070208HP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DCGT11T308HP KCU10 » 9.53 11.63 0.80 - -
    DCGT11T308HP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DCGT-HP

  14. DCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DCGT150408LF KCU10 » 12.70 15.50 0.80
    DCGT-LF

  15. DCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT070208FP KCU10 » 6.35 7.75 0.80 2.38 2.80
    DCMT11T308FP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DCMT150408FP KCU10 » 12.70 15.50 0.80 4.76 5.50
    DCMT-FP

  16. DCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DCMT11T308LF KCU10 » 9.53 11.63 0.80
    DCMT-LF

  17. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408FS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNGG-FS

  18. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408LF KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGG150408LF KCU10 » 12.70 15.50 0.80 - -
    DNGG-LF

  19. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150408 KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 KCU10 » 12.70 15.50 0.80 - -
    DNGP150608 KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 KCU10 » 12.70 15.50 0.80 - -
    DNGP

  20. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408CT KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408CT KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCU10 » 12.70 15.50 0.80 - -
    DNMG-CT

  21. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DNMG110408FF KCU10 » 9.53 11.63 0.80
    DNMG150408FF KCU10 » 12.70 15.50 0.80
    DNMG150608FF KCU10 » 12.70 15.50 0.80
    DNMG-FF

  22. DPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT070208HP KCU10 » 6.35 7.75 0.80 - -
    DPGT070208HP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPGT11T308HP KCU10 » 9.53 11.63 0.80 - -
    DPGT11T308HP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DPGT-HP

  23. DPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT11T308LF KC5010 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308LF KC5025 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308LF KCU10 » 9.53 11.63 0.80 - -
    DPGT-LF

  24. DPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070208FP KCU10 » 6.35 7.75 0.80 2.38 2.80
    DPMT070208FP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPMT11T308FP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DPMT-FP

  25. SCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT09T308FP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCU25 » 9.53 9.53 0.80 3.97 4.40
    SCMT120408FP KCU10 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408FP KCU25 » 12.70 12.70 0.80 4.76 5.50
    SCMT-FP

  26. SNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG090308FS KCU10 » 9.53 9.53 0.80 - -
    SNGG090308FS KCU25 » 9.53 9.53 0.80 3.18 3.81
    SNGG120408FS KCU10 » 12.70 12.70 0.80 - -
    SNGG-FS

  27. SNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG090308LF KC5010 » 9.53 9.53 0.80 3.18 3.81
    SNGG090308LF KCU10 » 9.53 9.53 0.80 - -
    SNGG-LF

  28. SNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGP120408 KCU10 » 12.70 12.70 0.80 4.76 5.16
    SNGP

  29. SNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    SNMG120408FP KCU10 » 12.70 12.70 0.80
    SNMG-FP

  30. SPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    SPGT09T308LF KCU10 » 9.53 9.53 0.80
    SPGT-LF

  31. SPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPMT09T308FP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308FP KCU25 » 9.53 9.53 0.80 3.97 4.40
    SPMT-FP

  32. TCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT110208HP KCU10 » 6.35 11.00 0.80 2.38 2.80
    TCGT110208HP KCU25 » 6.35 11.00 0.80 2.38 2.80
    TCGT16T308HP KCU10 » 9.53 16.50 0.80 3.97 4.40
    TCGT16T308HP KCU25 » 9.53 16.50 0.80 3.97 4.40
    TCGT-HP

  33. TCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT16T308LF KCU10 » 9.53 16.50 0.80 3.97 4.40
    TCGT-LF

  34. TCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT090208FP KCU10 » 5.56 9.63 0.80 2.38 2.50
    TCMT090208FP KCU25 » 5.56 9.63 0.80 2.38 2.50
    TCMT110208FP KCU10 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208FP KCU25 » 6.35 11.00 0.80 2.38 2.80
    TCMT110308FP KCU10 » 6.35 11.00 0.80 3.18 2.80
    TCMT110308FP KCU25 » 6.35 11.00 0.80 3.18 2.80
    TCMT16T308FP KCU10 » 9.53 16.50 0.80 3.97 4.40
    TCMT16T308FP KCU25 » 9.53 16.50 0.80 3.97 4.40
    TCMT220408FP KCU10 » 12.70 22.00 0.80 4.76 5.50
    TCMT220408FP KCU25 » 12.70 22.00 0.80 4.76 5.50
    TCMT-FP

  35. TCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110208LF KC5010 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208LF KC5025 » 6.35 11.00 0.80 2.38 2.80
    TCMT16T308LF KC5010 » 9.53 16.50 0.80 3.97 4.40
    TCMT16T308LF KC5025 » 9.53 16.50 0.80 3.97 4.40
    TCMT220408LF KC5010 » 12.70 22.00 0.80 4.76 5.50
    TCMT220408LF KC5025 » 12.70 22.00 0.80 4.76 5.50
    TCMT-LF

  36. TCMT-MP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110208MP KCU10 » 6.35 11.00 0.80 2.38 2.80
    TCMT16T308MP KCU10 » 9.53 16.50 0.80 3.97 4.40
    TCMT-MP

  37. TCMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110208UF KC5010 » 6.35 11.00 0.80 2.38 2.80
    TCMT16T308UF KC5010 » 9.53 16.50 0.80 3.97 4.40
    TCMT-UF

  38. TDHB

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TDHB07T1208 KC5010 » 4.06 7.04 0.79 1.19 2.39
    TDHB07T1208 KC5025 » 4.06 7.04 0.79 1.19 2.39
    TDHB07T1208 KCU10 » 4.06 7.04 0.79 - -
    TDHB

  39. TNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNGG160408FS KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNGG220408FS KCU10 » 12.70 22.00 0.80 - -
    TNGG220408FS KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNGG-FS

  40. TNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    TNGP160408 KCU10 » 9.53 16.50 0.80
    TNGP

  41. TNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG110308FF KC5010 » 6.35 11.00 0.80 3.18 2.26
    TNMG160408FF KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FF KCU10 » 9.53 16.50 0.80 - -
    TNMG-FF

  42. TNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160408FP KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG220408FP KC5010 » 12.70 22.00 0.80 4.76 5.16
    TNMG-FP

  43. TPCB

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPCB160308 KC5010 » 9.53 16.50 0.79 3.23 3.30
    TPCB160308 KC5025 » 9.53 16.50 0.79 3.23 3.30
    TPCB160308 KCU25 » 9.53 16.50 0.79 3.23 3.30
    TPCB

  44. TPCG-L

    Positive ISO insert for Finishing machining.

    Product Code D Rε S D1  
    TPCG110208L KC5010 » 6.35 0.79 2.44 3.30
    TPCG-L

  45. TPGH

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPGH160308 KC5010 » 9.53 16.50 0.80 3.18 3.33
    TPGH160308 KC5025 » 9.53 16.50 0.80 3.18 3.33
    TPGH160308 KCU10 » 9.53 16.50 0.80 - -
    TPGH160308 KCU25 » 9.53 16.50 0.80 3.18 3.33
    TPGH

  46. TPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPGT110208HP KCU10 » 6.35 11.00 0.80 - -
    TPGT110208HP KCU25 » 6.35 11.00 0.80 2.38 2.80
    TPGT16T308HP KCU10 » 9.53 16.50 0.80 - -
    TPGT16T308HP KCU25 » 9.53 16.50 0.80 3.97 4.40
    TPGT-HP

  47. TPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPGT110208LF KC5025 » 6.35 11.00 0.80 2.38 2.80
    TPGT110208LF KCU10 » 6.35 11.00 0.80 - -
    TPGT16T308LF KC5025 » 9.53 16.50 0.80 3.97 4.40
    TPGT16T308LF KCU10 » 9.53 16.50 0.80 - -
    TPGT-LF

  48. TPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPMT090208FP KCU10 » 5.56 9.63 0.80 2.38 2.50
    TPMT090208FP KCU25 » 5.56 9.63 0.80 2.38 2.50
    TPMT110208FP KCU10 » 6.35 11.00 0.80 2.38 2.80
    TPMT110308FP KCU10 » 6.35 11.00 0.80 3.18 2.80
    TPMT16T308FP KCU10 » 9.53 16.50 0.80 3.97 4.40
    TPMT16T308FP KCU25 » 9.53 16.50 0.80 3.97 4.40
    TPMT-FP

  49. TPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPMT16T308LF KC5025 » 9.53 16.50 0.80 3.97 4.40
    TPMT220408LF KC5025 » 12.70 22.00 0.80 4.76 5.50
    TPMT-LF

  50. TPMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPMT16T308UF KC5010 » 9.53 16.50 0.80 3.97 4.40
    TPMT-UF

  51. VBGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VBGT160408HP KC5025 » 9.53 16.61 0.80 4.76 4.40
    VBGT160408HP KCU10 » 9.53 16.61 0.80 - -
    VBGT160408HP KCU25 » 9.53 16.61 0.80 4.76 4.40
    VBGT-HP

  52. VBMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VBMT110308FP KCU10 » 6.35 11.07 0.80 3.18 2.80
    VBMT110308FP KCU25 » 6.35 11.07 0.80 3.18 2.80
    VBMT160408FP KCU10 » 9.53 16.61 0.80 4.76 4.40
    VBMT160408FP KCU25 » 9.53 16.61 0.80 4.76 4.40
    VBMT-FP

  53. VBMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VBMT110308LF KC5025 » 6.35 11.07 0.80 3.18 2.80
    VBMT160408LF KC5025 » 9.53 16.61 0.80 4.76 4.40
    VBMT-LF

  54. VNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG160408FS KCU25 » 9.53 16.61 0.80 4.76 3.81
    VNGG-FS

  55. VNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG160408LF KC5010 » 9.53 16.61 0.80 4.76 3.81
    VNGG160408LF KCU10 » 9.53 16.61 0.80 - -
    VNGG220408LF KC5010 » 12.70 22.14 0.80 4.76 5.16
    VNGG220408LF KCU10 » 12.70 22.14 0.80 - -
    VNGG-LF

  56. VNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    VNGP220408 KCU10 » 12.70 22.14 0.80
    VNGP

  57. VNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    VNMG160408FF KCU10 » 9.53 16.61 0.80
    VNMG-FF

  58. VNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    VNMG160408FP KCU10 » 9.53 16.61 0.80
    VNMG-FP

  59. WCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WCMT06T308FP KCU10 » 9.53 6.52 0.80 3.97 4.40
    WCMT-FP

  60. WCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WCMT06T308LF KC5010 » 9.53 6.52 0.80 3.97 4.40
    WCMT06T308LF KC5025 » 9.53 6.52 0.80 3.97 4.40
    WCMT-LF

  61. WNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNGG080408LF KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNGG080408LF KCU10 » 12.70 8.69 0.80 - -
    WNGG-LF

  62. WNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG060408FF KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FF KCU10 » 9.53 6.52 0.80 - -
    WNMG080408FF KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FF KCU10 » 12.70 8.69 0.80 - -
    WNMG-FF

  63. WNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG060408FP KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FP KCU10 » 9.53 6.52 0.80 - -
    WNMG080408FP KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FP KCU10 » 12.70 8.69 0.80 - -
    WNMG-FP

  64. WPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WPMT06T308FP KCU10 » 9.53 6.52 0.80 3.97 4.40
    WPMT-FP

  65. WPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WPMT06T308LF KC5010 » 9.53 6.52 0.80 3.97 4.40
    WPMT06T308LF KC5025 » 9.53 6.52 0.80 3.97 4.40
    WPMT-LF

180 Item(s)

per page

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: Universal Remove This Item
  2. Type of Cut: Finishing Remove This Item
  3. Radius°: 0.80 Remove This Item
Clear All

Shopping Options

Category
  1. ISO Beyond Inserts (180)
  2. ISO Select Inserts (0)
Manufacturer
  1. Kennametal (180)
ISO Insert Range
  1. Beyond Premium (180)
Material Machining
  1. Steel (552)
  2. Stainless Steel (302)
  3. Cast Iron (306)
  4. Aluminium (26)
  5. HRSA (244)
Insert Type
  1. Negative (57)
  2. Positive (123)
Type of Cut
  1. Fine Finishing (4)
  2. Wiper Finishing (13)
  3. Medium (57)
  4. Wiper Medium (4)
  5. Rough Positive (4)
  6. Rough (25)
Tip Style
  1. CCGT (7)
  2. CCMT (6)
  3. CNGG (5)
  4. CNGP (1)
  5. CNMG (4)
  6. CPGH (4)
  7. CPGT (6)
  8. CPMT (4)
  9. DCGT (5)
  10. DCMT (5)
  11. DNGG (3)
  12. DNGP (4)
  13. DNMG (6)
  14. DPGT (7)
  15. DPMT (4)
  16. SCMT (4)
  17. SNGG (5)
  18. SNGP (1)
  19. SNMG (1)
  20. SPGT (1)
  21. SPMT (2)
  22. TCGT (5)
  23. TCMT (20)
  24. TDHB (3)
  25. TNGG (3)
  26. TNGP (1)
  27. TNMG (5)
  28. TPCB (3)
  29. TPCG (1)
  30. TPGH (4)
  31. TPGT (8)
  32. TPMT (9)
  33. VBGT (3)
  34. VBMT (6)
  35. VNGG (5)
  36. VNGP (1)
  37. VNMG (2)
  38. WCMT (3)
  39. WNGG (2)
  40. WNMG (8)
  41. WPMT (3)
Radius°
  1. 0.05 (8)
  2. 0.10 (33)
  3. 0.20 (135)
  4. 0.34 (1)
  5. 0.40 (217)
  6. 0.74 (2)
  7. 1.14 (2)
  8. 1.20 (18)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...