Kennametal Carbide Turning Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

Achieve higher metal removal rates
(speed, feed, and depth of cut).
Gain longer tool life.

Reliability

Deliver uniform wear for predictable tool life.
Achieve reduced depth-of-cut notching.
Virtually eliminate chip flow damage.

Versatility

Products can be applied across a wide range of applications.
Can be used in low- to high-speed applications.

Complete Portfolio

The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Click through to the products to see videos of them in action, and also find their related matching tools.

CNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNGG120404FS K313 »	12.70	12.90	0.40	4.76	5.16
CNGG120404FS KCU25 »	12.70	12.90	0.40	4.76	5.16

CNGG-LF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNGG120404LF K313 »	12.70	12.90	0.40	4.76	5.16
CNGG120404LF KC5010 »	12.70	12.90	0.40	4.76	5.16
CNGG120404LF KC730 »	12.70	12.90	0.40	4.76	5.16
CNGG120404LF KCU10 »	12.70	12.90	0.40	-	-

CNGP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNGP120404 K10U »	12.70	12.90	0.40	-	-
CNGP120404 K313 »	12.70	12.90	0.40	4.76	5.16
CNGP120404 KCU10 »	12.70	12.90	0.40	-	-

CNMG-FF

Negative ISO insert for Fine Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMG090304FF KC5010 »	9.53	9.67	0.40	3.18	3.81
CNMG090304FF KCU10 »	9.53	9.67	0.40	-	-
CNMG120404FF KC5010 »	12.70	12.90	0.40	4.76	5.16
CNMG120404FF KCU10 »	12.70	12.90	0.40	-	-

CNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMG120404FP KC5010 »	12.70	12.90	0.40	4.76	5.16
CNMG120404FP KCU10 »	12.70	12.90	0.40	-	-

CNMG-FW

Negative ISO insert for Wiper Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMG120404FW KC5010 »	12.70	12.90	0.40	4.76	5.16
CNMG120404FW KCU10 »	12.70	12.90	0.40	-	-

CNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
CNMG120404MP KC5010 »	12.70	12.90	0.40	4.76	5.16
CNMG120404MP KCU10 »	12.70	12.90	0.40	-	-

CNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
CNMG120404MS K313 »	12.70	12.90	0.40	4.76	5.16
CNMG120404MS KCU10 »	12.70	12.90	0.40	-	-
CNMG120404MS KCU25 »	12.70	12.90	0.40	4.76	5.16

CNMG-RP

Negative ISO insert for Rough Positive machining.

Product Code	D	L10	Rε	S	D1
CNMG120404RP KCU10 »	12.70	12.90	0.40	-	-
CNMG120404RP KCU25 »	12.70	12.90	0.40	4.76	5.16

DNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
DNGG110404FS KC5510 »	9.52	11.63	0.40	4.76	3.81
DNGG150404FS KC5525 »	12.70	15.50	0.40	4.76	5.16
DNGG150404FS KCU25 »	12.70	15.50	0.40	4.76	5.16
DNGG150604FS KC5510 »	12.70	15.50	0.40	6.35	5.16
DNGG150604FS KC5525 »	12.70	15.50	0.40	6.35	5.16
DNGG150604FS KCU25 »	12.70	15.50	0.40	6.35	5.16

DNGG-LF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
DNGG150404LF K313 »	12.70	15.50	0.40	4.76	5.16
DNGG150404LF KC5010 »	12.70	15.50	0.40	4.76	5.16
DNGG150404LF KCU10 »	12.70	15.50	0.40	-	-

DNGP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
DNGP150404 K313 »	12.70	15.50	0.40	4.76	5.16
DNGP150404 KC5010 »	12.70	15.50	0.40	4.76	5.16
DNGP150404 KCU10 »	12.70	15.50	0.40	-	-
DNGP150604 K313 »	12.70	15.50	0.40	6.35	5.16
DNGP150604 KC5010 »	12.70	15.50	0.40	6.35	5.16
DNGP150604 KCU10 »	12.70	15.50	0.40	-	-

DNMG-CT

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
DNMG110404CT KC5010 »	9.53	11.63	0.40	4.76	3.81
DNMG150404CT KC5010 »	12.70	15.50	0.40	4.76	5.16
DNMG150404CT KCU10 »	12.70	15.50	0.40	-	-

DNMG-FF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
DNMG110404FF KCU10 »	9.53	11.63	0.40
DNMG150404FF KCU10 »	12.70	15.50	0.40
DNMG150604FF KCU10 »	12.70	15.50	0.40

DNMG-FW

Negative ISO insert for Wiper Finishing machining.

Product Code	D	L10	Rε	S	D1
DNMG110404FW KC5010 »	9.53	11.63	0.40	4.76	3.81
DNMG110404FW KCU10 »	9.53	11.63	0.40	-	-
DNMG150404FW KC5010 »	12.70	15.50	0.40	4.76	5.16
DNMG150404FW KCU10 »	12.70	15.50	0.40	-	-
DNMG150408FW KC5010 »	12.70	15.50	0.41	4.76	5.16
DNMG150408FW KCU10 »	12.70	15.50	0.41	-	-
DNMG150604FW KC5010 »	12.70	15.50	0.40	6.35	5.16
DNMG150604FW KCU10 »	12.70	15.50	0.40	-	-
DNMG150608FW KC5010 »	12.70	15.50	0.41	6.35	5.16
DNMG150608FW KCU10 »	12.70	15.50	0.41	-	-

DNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
DNMG150404MP KC5010 »	12.70	15.50	0.40	4.76	5.16
DNMG150404MP KCU10 »	12.70	15.50	0.40	-	-
DNMG150604MP KC5010 »	12.70	15.50	0.40	6.35	5.16
DNMG150604MP KCU10 »	12.70	15.50	0.40	-	-

DNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
DNMG150404MS K313 »	12.70	15.50	0.40	4.76	5.16
DNMG150404MS KCU10 »	12.70	15.50	0.40	-	-
DNMG150404MS KCU25 »	12.70	15.50	0.40	4.76	5.16
DNMG150604MS K313 »	12.70	15.50	0.40	6.35	5.16
DNMG150604MS KCU10 »	12.70	15.50	0.40	-	-
DNMG150604MS KCU25 »	12.70	15.50	0.40	6.35	5.16

DNMG-UP

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
DNMG150404UP KC5010 »	12.70	15.50	0.40	4.76	5.16
DNMG150404UP KCU10 »	12.70	15.50	0.40	-	-
DNMG150604UP KC5010 »	12.70	15.50	0.40	6.35	5.16

SNGP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
SNGP120404 KCU10 »	12.70	12.70	0.40

SNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
SNMG120404FP KC5010 »	12.70	12.70	0.40	4.76	5.16
SNMG120404FP KCU10 »	12.70	12.70	0.40	-	-

TNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
TNGG160404FS KCU10 »	9.53	16.50	0.40	-	-
TNGG160404FS KCU25 »	9.53	16.50	0.40	4.76	3.81

TNGP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
TNGP160404 KCU10 »	9.53	16.50	0.40

TNMG-FF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
TNMG110304FF KC5010 »	6.35	11.00	0.40	3.18	2.26
TNMG110304FF KCU10 »	6.35	11.00	0.40	-	-
TNMG160404FF KC5010 »	9.53	16.50	0.40	4.76	3.81
TNMG160404FF KCU10 »	9.53	16.50	0.40	-	-

TNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
TNMG160404FP KC5010 »	9.53	16.50	0.40	4.76	3.81
TNMG220404FP KC5010 »	12.70	22.00	0.40	4.76	5.16

TNMG-FW

Negative ISO insert for Wiper Finishing machining.

Product Code	D	L10	Rε	S	D1
TNMG160404FW KC5010 »	9.53	16.50	0.40	4.76	3.81
TNMG160404FW KCU10 »	9.53	16.50	0.40	-	-

TNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε
TNMG160404MP KCU10 »	9.53	16.50	0.40

TNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
TNMG160404MS K313 »	9.53	16.50	0.40	4.76	3.81
TNMG160404MS KC5510 »	9.53	16.50	0.40	4.76	3.81
TNMG160404MS KCU10 »	9.53	16.50	0.40	-	-
TNMG160404MS KCU25 »	9.53	16.50	0.40	4.76	3.81
TNMG220404MS KCU10 »	12.70	22.00	0.40	-	-
TNMG220404MS KCU25 »	12.70	22.00	0.40	4.76	5.16

TNMP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
TNMP160404 K313 »	9.53	16.50	0.40	4.76	3.81
TNMP160404 K68 »	9.53	16.50	0.40	4.76	3.81
TNMP220404 K68 »	12.70	22.00	0.40	4.76	5.16

VNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
VNGG160404FS K313 »	9.53	16.61	0.40	4.76	3.81
VNGG160404FS KCU25 »	9.53	16.61	0.40	4.76	3.81

VNGG-LF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
VNGG160404LF K313 »	9.53	16.61	0.40	4.76	3.81
VNGG160404LF KC5010 »	9.53	16.61	0.40	4.76	3.81
VNGG160404LF KC730 »	9.53	16.61	0.40	4.76	3.81
VNGG160404LF KCU10 »	9.53	16.61	0.40	-	-

VNGP-K

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
VNGP160404K K313 »	9.53	16.61	0.40	4.76	3.81

VNMG-FF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
VNMG160404FF KCU10 »	9.53	16.61	0.40

VNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
VNMG160404FP KCU10 »	9.53	16.61	0.40

VNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMG160404MP KC5010 »	9.53	16.61	0.40	4.76	3.81
VNMG160404MP KCU10 »	9.53	16.61	0.40	-	-

VNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMG160404MS K313 »	9.53	16.61	0.40	4.76	3.81
VNMG160404MS KCU10 »	9.53	16.61	0.40	-	-
VNMG160404MS KCU25 »	9.53	16.61	0.40	4.76	3.81
VNMG220404MS KC5525 »	12.70	22.14	0.40	4.76	5.16
VNMG220404MS KCU25 »	12.70	22.14	0.40	4.76	5.16

VNMG-UP

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε
VNMG160404UP KCU10 »	9.53	16.61	0.40

VNMP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMP160404 K313 »	9.53	16.61	0.40	4.76	3.81

VNMP-K

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMP160404K K68 »	9.53	16.61	0.40	4.76	3.81

VNMS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMS160404 K68 »	9.53	16.61	0.40	4.76	3.81

WNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WNGG080404FS KC5510 »	12.70	8.69	0.40	4.76	5.16

WNGG-LF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WNGG080404LF KC5010 »	12.70	8.69	0.40	4.76	5.16
WNGG080404LF KCU10 »	12.70	8.69	0.40	-	-

WNMG-FF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WNMG060404FF KC5010 »	9.53	6.52	0.40	4.76	3.81
WNMG060404FF KCU10 »	9.53	6.52	0.40	-	-
WNMG080404FF KC5010 »	12.70	8.69	0.40	4.76	5.16
WNMG080404FF KCU10 »	12.70	8.69	0.40	-	-

WNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WNMG060404FP KC5010 »	9.53	6.52	0.40	4.76	3.81
WNMG060404FP KCU10 »	9.53	6.52	0.40	-	-
WNMG080404FP KC5010 »	12.70	8.69	0.40	4.76	5.16
WNMG080404FP KCU10 »	12.70	8.69	0.40	-	-

WNMG-FW

Negative ISO insert for Wiper Finishing machining.

Product Code	D	L10	Rε	S	D1
WNMG060404FW KC5010 »	9.53	6.52	0.40	4.76	3.81
WNMG060404FW KCU10 »	9.53	6.52	0.40	-	-
WNMG080404FW KC5010 »	12.70	8.69	0.40	4.76	5.16
WNMG080404FW KCU10 »	12.70	8.69	0.40	-	-

WNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε
WNMG060404MP KCU10 »	9.53	6.52	0.40

WNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
WNMG080404MS K313 »	12.70	8.69	0.40	4.76	5.16
WNMG080404MS KCU25 »	12.70	8.69	0.40	4.76	5.16