GBP
EUR
USD- Home /
- M4D025Z02B25LN15
Details
M4D025Z02B25LN15
Additional Information
| SKU | 5528630 |
|---|---|
| Manufacturer | Kennametal |
| Tool Group | Mill 4-15, Weldon End Mills |
| Mill Type | Weldon End Mills |
| D1 - mm | 25.00 |
| D - mm | 25.00 |
| L - mm | 89.00 |
| L2 - mm | 32.00 |
| Ap1 max | 15.50 |
| Z - mm | 2.00 |
| KG | 0.28 |
| Max RPM | 26,700.00 |
| Platform | Mill 4-15 |
Related Products
Below are the related products for this Shoulder Mill Toolholder.
Shoulder Mill Inserts
LNGU-EGE - 9 products Inserts for Light Machining
| Product Code | LI | W | S | BS | Rε | HM | Cutting Edges | Material Machining | |
|---|---|---|---|---|---|---|---|---|---|
| LNGU15T604ERGE KC522M | 17.01 | 10.00 | 4.76 | 2.20 | 0.40 | 0.08 | 4 | ||
| LNGU15T608ERGE KC522M | 17.01 | 10.00 | 4.76 | 1.80 | 0.80 | 0.08 | 4 | ||
| LNGU15T612ERGE KC522M | 17.01 | 10.00 | 4.76 | 1.40 | 1.20 | 0.08 | 4 | ||
| LNGU15T604ERGE KC725M | 17.01 | 10.00 | 4.76 | 2.20 | 0.40 | 0.08 | 4 | ||
| LNGU15T608ERGE KC725M | 17.01 | 10.00 | 4.76 | 1.80 | 0.80 | 0.08 | 4 | ||
| LNGU15T612ERGE KC725M | 17.01 | 10.00 | 4.76 | 1.40 | 1.20 | 0.08 | 4 | ||
| LNGU15T604ERGE KCPM40 | 17.01 | 10.00 | 4.76 | 2.20 | 0.40 | 0.08 | 4 | ||
| LNGU15T608ERGE KCPM40 | 17.01 | 10.00 | 4.76 | 1.80 | 0.80 | 0.08 | 4 | ||
| LNGU15T612ERGE KCPM40 | 17.01 | 10.00 | 4.76 | 1.40 | 1.20 | 0.08 | 4 |
LNGU-SGE - 23 products Inserts for General Purpose Machining
| Product Code | LI | W | S | BS | Rε | HM | Cutting Edges | Material Machining | |
|---|---|---|---|---|---|---|---|---|---|
| LNGU15T604SRGE KC520M | 17.00 | 10.00 | 4.76 | 2.20 | 0.40 | 0.10 | 4 | ||
| LNGU15T608SRGE KC520M | 17.01 | 10.00 | 4.76 | 1.80 | 0.80 | 0.10 | 4 | ||
| LNGU15T612SRGE KC520M | 17.00 | 10.00 | 4.76 | 1.40 | 1.20 | 0.10 | 4 | ||
| LNGU15T616SRGE KC520M | 17.01 | 10.00 | 4.76 | 1.07 | 1.60 | 0.10 | 4 | ||
| LNGU15T604SRGE KC522M | 17.00 | 10.00 | 4.76 | 2.20 | 0.40 | 0.10 | 4 | ||
| LNGU15T608SRGE KC522M | 17.01 | 10.00 | 4.76 | 1.80 | 0.80 | 0.10 | 4 | ||
| LNGU15T612SRGE KC522M | 17.00 | 10.00 | 4.76 | 1.40 | 1.20 | 0.10 | 4 | ||
| LNGU15T616SRGE KC522M | 17.01 | 10.00 | 4.76 | 1.07 | 1.60 | 0.10 | 4 | ||
| LNGU15T604SRGE KC725M | 17.00 | 10.00 | 4.76 | 2.20 | 0.40 | 0.10 | 4 | ||
| LNGU15T608SRGE KC725M | 17.01 | 10.00 | 4.76 | 1.80 | 0.80 | 0.10 | 4 | ||
| LNGU15T612SRGE KC725M | 17.00 | 10.00 | 4.76 | 1.40 | 1.20 | 0.10 | 4 | ||
| LNGU15T616SRGE KC725M | 17.01 | 10.00 | 4.76 | 1.07 | 1.60 | 0.10 | 4 | ||
| LNGU15T604SRGE KCK15 | 17.00 | 10.00 | 4.76 | 2.20 | 0.40 | 0.10 | 4 | ||
| LNGU15T608SRGE KCK15 | 17.01 | 10.00 | 4.76 | 1.80 | 0.80 | 0.10 | 4 | ||
| LNGU15T612SRGE KCK15 | 17.00 | 10.00 | 4.76 | 1.40 | 1.20 | 0.10 | 4 | ||
| LNGU15T616SRGE KCK15 | 17.01 | 10.00 | 4.76 | 1.07 | 1.60 | 0.10 | 4 | ||
| LNGU15T604SRGE KCPM20 | 17.00 | 10.00 | 4.76 | 2.20 | 0.40 | 0.10 | 4 | ||
| LNGU15T608SRGE KCPM20 | 17.01 | 10.00 | 4.76 | 1.80 | 0.80 | 0.10 | 4 | ||
| LNGU15T612SRGE KCPM20 | 17.00 | 10.00 | 4.76 | 1.40 | 1.20 | 0.10 | 4 | ||
| LNGU15T604SRGE KCPK30 | 17.00 | 10.00 | 4.76 | 2.20 | 0.40 | 0.10 | 4 | ||
| LNGU15T608SRGE KCPK30 | 17.01 | 10.00 | 4.76 | 1.80 | 0.80 | 0.10 | 4 | ||
| LNGU15T612SRGE KCPK30 | 17.00 | 10.00 | 4.76 | 1.40 | 1.20 | 0.10 | 4 | ||
| LNGU15T616SRGE KCPK30 | 17.01 | 10.00 | 4.76 | 1.07 | 1.60 | 0.10 | 4 |
LNGU-SGEM - 8 products Inserts for Heavy Duty Machining
| Product Code | LI | W | S | BS | Rε | HM | Cutting Edges | Material Machining | |
|---|---|---|---|---|---|---|---|---|---|
| LNGU15T608SRGEM KC520M | 17.01 | 10.00 | 4.76 | 1.70 | 0.80 | 0.10 | 4 | ||
| LNGU15T616SRGEM KC520M | 17.01 | 10.00 | 4.76 | 0.95 | 1.62 | 0.10 | 4 | ||
| LNGU15T608SRGEM KCK15 | 17.01 | 10.00 | 4.76 | 1.70 | 0.80 | 0.10 | 4 | ||
| LNGU15T616SRGEM KCK15 | 17.01 | 10.00 | 4.76 | 0.95 | 1.62 | 0.10 | 4 | ||
| LNGU15T608SRGEM KCPM20 | 17.01 | 10.00 | 4.76 | 1.70 | 0.80 | 0.10 | 4 | ||
| LNGU15T616SRGEM KCPM20 | 17.01 | 10.00 | 4.76 | 0.95 | 1.62 | 0.10 | 4 | ||
| LNGU15T608SRGEM KCPK30 | 17.01 | 10.00 | 4.76 | 1.70 | 0.80 | 0.10 | 4 | ||
| LNGU15T616SRGEM KCPK30 | 17.01 | 10.00 | 4.76 | 0.95 | 1.62 | 0.10 | 4 |
LNPU-SGE - 7 products Inserts for Heavy Duty Machining
| Product Code | LI | W | S | BS | Rε | HM | Cutting Edges | Material Machining | |
|---|---|---|---|---|---|---|---|---|---|
| LNPU15T608SRGE KC520M | 16.90 | 10.00 | 4.76 | 1.80 | 0.80 | 0.10 | 4 | ||
| LNPU15T608SRGE KC522M | 16.90 | 10.00 | 4.76 | 1.80 | 0.80 | 0.10 | 4 | ||
| LNPU15T608SRGE KC725M | 16.90 | 10.00 | 4.76 | 1.80 | 0.80 | 0.10 | 4 | ||
| LNPU15T608SRGE KCK15 | 16.90 | 10.00 | 4.76 | 1.80 | 0.80 | 0.10 | 4 | ||
| LNPU15T608SRGE KCPM20 | 16.90 | 10.00 | 4.76 | 1.80 | 0.80 | 0.10 | 4 | ||
| LNPU15T608SRGE KCPK30 | 16.90 | 10.00 | 4.76 | 1.80 | 0.80 | 0.10 | 4 | ||
| LNPU15T608SRGE KCPM40 | 16.90 | 10.00 | 4.76 | 1.80 | 0.80 | 0.10 | 4 |
Tick the related products you wish to purchase and add to cart with this Shoulder Mill Toolholder.
Compare Products
You have no items to compare.
My Cart
You have no items in your shopping cart.
