GBP
EUR
USDDetails
A25RNNTOR3
Additional Information
| SKU | 1098953 |
|---|---|
| Manufacturer | Kennametal |
| Tool Group | A-NNT-R |
| D min - mm | 34.00 |
| D - mm | 25.00 |
| F - mm | 17.00 |
| L1 - mm | 200.00 |
| CS | 1/4-18 NPT |
| Clamp | CM73LP |
| Clamp Screw | MS2111 |
| Torx Plus | 25 IP |
| Hand of Tool | R |
| Gauge Insert | N..3L |
Related Products
Below are the related products for this Top Notch Boring Bar.
Top Notch Inserts
NG-L - 58 products General-purpose grooving. O-ring grooving. Circlip grooving. Neutral rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NG3047L K313 | 3 | 1.19 | 0.19 | 1.91 | |
| NG3047L KC5010 | 3 | 1.19 | 0.19 | 1.91 | |
| NG3047L KCU10 | 3 | 1.19 | 0.19 | 1.91 | |
| NG3047L KCU25 | 3 | 1.19 | 0.19 | 1.91 | |
| NG3062L K313 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062LEST KB1630 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062L KC5010 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062L KC5025 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062L KCU10 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062L KCU25 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062LEST KD1425 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3072L KC5010 | 3 | 1.83 | 0.19 | 2.39 | |
| NG3072L KCU10 | 3 | 1.83 | 0.19 | 2.39 | |
| NG3078L KC5010 | 3 | 1.98 | 0.19 | 2.39 | |
| NG3078L KCU10 | 3 | 1.98 | 0.19 | 2.39 | |
| NG3088L KC5010 | 3 | 2.24 | 0.19 | 2.39 | |
| NG3088L KCU10 | 3 | 2.24 | 0.19 | 2.39 | |
| NG3088L KCU25 | 3 | 2.24 | 0.19 | 2.39 | |
| NG3094L K313 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094LEST KB1630 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094L KC5010 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094L KC5025 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094L KC9110 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094L KCU10 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094L KCU25 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094LEST KD1425 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3097L KC5010 | 3 | 2.46 | 0.32 | 3.81 | |
| NG3097L KCU10 | 3 | 2.46 | 0.32 | 3.81 | |
| NG3097L KCU25 | 3 | 2.46 | 0.32 | 3.81 | |
| NG3105L KC5010 | 3 | 2.67 | 0.19 | 3.81 | |
| NG3105L KCU10 | 3 | 2.67 | 0.19 | 3.81 | |
| NG3105L KCU25 | 3 | 2.67 | 0.19 | 3.81 | |
| NG3110L KC5025 | 3 | 2.79 | 0.32 | 3.81 | |
| NG3110L KCU25 | 3 | 2.79 | 0.32 | 3.81 | |
| NG3122L KCU25 | 3 | 3.10 | 0.19 | 3.81 | |
| NG3125L K313 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125LEST KB1630 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125L KC5010 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125L KC5025 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125L KC9110 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125L KCU10 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125L KCU25 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125LEST KD1425 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3142L KC5010 | 3 | 3.61 | 0.32 | 3.81 | |
| NG3142L KCU10 | 3 | 3.61 | 0.32 | 3.81 | |
| NG3142L KCU25 | 3 | 3.61 | 0.32 | 3.81 | |
| NG3156L KC5010 | 3 | 3.96 | 0.19 | 3.81 | |
| NG3156L KC5025 | 3 | 3.96 | 0.19 | 3.81 | |
| NG3156L KCU25 | 3 | 3.96 | 0.19 | 3.81 | |
| NG3178L KCU25 | 3 | 4.52 | 0.19 | 3.81 | |
| NG3185L KC5025 | 3 | 4.70 | 0.57 | 3.81 | |
| NG3189L K313 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189L KC5010 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189L KC5025 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189L KC9110 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189L KCU10 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189L KCU25 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189LEST KD1425 | 3 | 4.80 | 0.57 | 3.81 |
NR-L - 31 products Full radius grooving. Turning profiling. Neutral rake angle.
| Product Code | Seat | W | RC | T | |
|---|---|---|---|---|---|
| NR3031L KC5025 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3M100L KC5025 | 3 | 2.00 | 1.00 | 2.39 | |
| NR3M150L KC5025 | 3 | 3.00 | 1.50 | 3.81 | |
| NR3062L KC5025 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3M200L KC5025 | 3 | 4.00 | 2.00 | 3.81 | |
| NR3M225L KC5025 | 3 | 4.50 | 2.25 | 3.81 | |
| NR3094L KC5025 | 3 | 4.78 | 2.39 | 3.81 | |
| NR3031L K313 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3031L KC5010 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3031L KCU10 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3031L KCU25 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3M100L KC9320 | 3 | 2.00 | 1.00 | 2.39 | |
| NR3047L K313 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3047L KC5010 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3047L KCU10 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3047L KCU25 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3M125L KC9320 | 3 | 2.50 | 1.25 | 3.81 | |
| NR3M150L KC5010 | 3 | 3.00 | 1.50 | 3.81 | |
| NR3M150L KC9320 | 3 | 3.00 | 1.50 | 3.81 | |
| NR3M150L KCU10 | 3 | 3.00 | 1.50 | 3.81 | |
| NR3062L K313 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3062L KC5010 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3062L KCU10 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3062L KCU25 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3M175L KC9320 | 3 | 3.50 | 1.75 | 3.81 | |
| NR3M200L KC9320 | 3 | 4.00 | 2.00 | 3.81 | |
| NR3M225L KC9320 | 3 | 4.50 | 2.25 | 3.81 | |
| NR3094L K313 | 3 | 4.78 | 2.39 | 3.81 | |
| NR3094L KC5010 | 3 | 4.78 | 2.39 | 3.81 | |
| NR3094L KCU10 | 3 | 4.78 | 2.39 | 3.81 | |
| NR3094L KCU25 | 3 | 4.78 | 2.39 | 3.81 |
NRD-L - 8 products Deep grooving. Full radius endform. Neutral rake angle.
| Product Code | Seat | W | RC | T | |
|---|---|---|---|---|---|
| NRD3031L KC5025 | 3 | 1.58 | 0.79 | 3.18 | |
| NRD3062L KC5025 | 3 | 3.18 | 1.59 | 6.35 | |
| NRD3031L KC5010 | 3 | 1.58 | 0.79 | 3.18 | |
| NRD3031L KCU10 | 3 | 1.58 | 0.79 | 3.18 | |
| NRD3031L KCU25 | 3 | 1.58 | 0.79 | 3.18 | |
| NRD3062L KC5010 | 3 | 3.18 | 1.59 | 6.35 | |
| NRD3062L KCU10 | 3 | 3.18 | 1.59 | 6.35 | |
| NRD3062L KCU25 | 3 | 3.18 | 1.59 | 6.35 |
NG-LK - 91 products Chip control geometry. General-purpose grooving. O-ring grooving. Circlip grooving. Light turning. 10°/Positive rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NG3M100LK KC5025 | 3 | 1.00 | 0.19 | 1.91 | |
| NG3M100LK KCU25 | 3 | 1.00 | 0.19 | 1.91 | |
| NG3047LK KC5010 | 3 | 1.19 | 0.19 | 1.91 | |
| NG3047LK KC5025 | 3 | 1.19 | 0.19 | 1.91 | |
| NG3047LK KCU10 | 3 | 1.19 | 0.19 | 1.91 | |
| NG3047LK KCU25 | 3 | 1.19 | 0.19 | 1.91 | |
| NG3M120LK KC5010 | 3 | 1.20 | 0.19 | 1.91 | |
| NG3M120LK KC5025 | 3 | 1.20 | 0.19 | 1.91 | |
| NG3M120LK KCU10 | 3 | 1.20 | 0.19 | 1.91 | |
| NG3M120LK KCU25 | 3 | 1.20 | 0.19 | 1.91 | |
| NG3M150LK KC5025 | 3 | 1.50 | 0.19 | 2.39 | |
| NG3M150LK KC9110 | 3 | 1.50 | 0.19 | 2.39 | |
| NG3M150LK KC9320 | 3 | 1.50 | 0.19 | 2.39 | |
| NG3M150LK KCU25 | 3 | 1.50 | 0.19 | 2.39 | |
| NG3062LK KC5010 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062LK KC5025 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062LK KC9320 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062LK KCU10 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062LK KCU25 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062LK KT315 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3M175LK KC5025 | 3 | 1.75 | 0.19 | 2.39 | |
| NG3M175LK KCU25 | 3 | 1.75 | 0.19 | 2.39 | |
| NG3072LK KC5010 | 3 | 1.83 | 0.19 | 2.39 | |
| NG3072LK KC5025 | 3 | 1.83 | 0.19 | 2.39 | |
| NG3072LK KCU10 | 3 | 1.83 | 0.19 | 2.39 | |
| NG3072LK KCU25 | 3 | 1.83 | 0.19 | 2.39 | |
| NG3078LK KC5010 | 3 | 1.98 | 0.19 | 2.39 | |
| NG3078LK KC5025 | 3 | 1.98 | 0.19 | 2.39 | |
| NG3078LK KCU10 | 3 | 1.98 | 0.19 | 2.39 | |
| NG3078LK KCU25 | 3 | 1.98 | 0.19 | 2.39 | |
| NG3M200LK KC5025 | 3 | 2.00 | 0.19 | 2.39 | |
| NG3M200LK KC9320 | 3 | 2.00 | 0.19 | 2.39 | |
| NG3M200LK KCU25 | 3 | 2.00 | 0.19 | 2.39 | |
| NG3M220LK KC5025 | 3 | 2.20 | 0.19 | 2.39 | |
| NG3M220LK KCU25 | 3 | 2.20 | 0.19 | 2.39 | |
| NG3M225LK KC5010 | 3 | 2.24 | 0.19 | 2.39 | |
| NG3M225LK KC9110 | 3 | 2.24 | 0.19 | 2.39 | |
| NG3M225LK KC9320 | 3 | 2.24 | 0.19 | 2.39 | |
| NG3M225LK KCU10 | 3 | 2.24 | 0.19 | 2.39 | |
| NG3M225LK KCU25 | 3 | 2.24 | 0.19 | 2.39 | |
| NG3094LK KC5010 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094LK KC5025 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094LK KC9110 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094LK KCU10 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094LK KCU25 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094LK KT315 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3M250LK KC5025 | 3 | 2.50 | 0.19 | 3.81 | |
| NG3M250LK KC9110 | 3 | 2.50 | 0.19 | 3.81 | |
| NG3M250LK KC9320 | 3 | 2.50 | 0.19 | 3.81 | |
| NG3M250LK KCU25 | 3 | 2.50 | 0.19 | 3.81 | |
| NG3M275LK KC5010 | 3 | 2.75 | 0.19 | 3.81 | |
| NG3M275LK KC5025 | 3 | 2.75 | 0.19 | 3.81 | |
| NG3M275LK KCU10 | 3 | 2.75 | 0.19 | 3.81 | |
| NG3M275LK KCU25 | 3 | 2.75 | 0.19 | 3.81 | |
| NG3M300LK KC5010 | 3 | 3.00 | 0.19 | 3.81 | |
| NG3M300LK KC5025 | 3 | 3.00 | 0.19 | 3.81 | |
| NG3M300LK KC9110 | 3 | 3.00 | 0.19 | 3.81 | |
| NG3M300LK KC9320 | 3 | 3.00 | 0.19 | 3.81 | |
| NG3M300LK KCU10 | 3 | 3.00 | 0.19 | 3.81 | |
| NG3M300LK KCU25 | 3 | 3.00 | 0.19 | 3.81 | |
| NG3125LK KC5010 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125LK KC5025 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125LK KC9110 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125LK KCU10 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125LK KCU25 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3M320LK KC5025 | 3 | 3.20 | 0.19 | 3.81 | |
| NG3M320LK KCU25 | 3 | 3.20 | 0.19 | 3.81 | |
| NG3M325LK KC5025 | 3 | 3.25 | 0.19 | 3.81 | |
| NG3M325LK KCU25 | 3 | 3.25 | 0.19 | 3.81 | |
| NG3M350LK KC5025 | 3 | 3.50 | 0.32 | 3.81 | |
| NG3M350LK KCU25 | 3 | 3.50 | 0.32 | 3.81 | |
| NG3156LK KC5010 | 3 | 3.96 | 0.19 | 3.81 | |
| NG3156LK KC5025 | 3 | 3.96 | 0.19 | 3.81 | |
| NG3156LK KCU10 | 3 | 3.96 | 0.19 | 3.81 | |
| NG3156LK KCU25 | 3 | 3.96 | 0.19 | 3.81 | |
| NG3M400LK KC9110 | 3 | 3.99 | 0.32 | 3.81 | |
| NG3M400LK KC9320 | 3 | 3.99 | 0.32 | 3.81 | |
| NG3M400LK KCU10 | 3 | 3.99 | 0.32 | 3.81 | |
| NG3M400LK KCU25 | 3 | 3.99 | 0.32 | 3.81 | |
| NG3M400LK KC5010 | 3 | 4.00 | 0.32 | 3.81 | |
| NG3M400LK KC5025 | 3 | 4.00 | 0.32 | 3.81 | |
| NG3M425LK KCU25 | 3 | 4.24 | 0.32 | 3.81 | |
| NG3M425LK KC5010 | 3 | 4.25 | 0.32 | 3.81 | |
| NG3M425LK KCU10 | 3 | 4.25 | 0.32 | 3.81 | |
| NG3M450LK KCU25 | 3 | 4.50 | 0.32 | 3.81 | |
| NG3189LK KC5010 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189LK KC5025 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189LK KC9110 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189LK KC9320 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189LK KCU10 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189LK KCU25 | 3 | 4.80 | 0.57 | 3.81 |
NGP-L - 7 products General-purpose grooving. O-ring grooving. Circlip grooving. 5°/Positive rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NGP3088L KC5010 | 3 | 2.24 | 0.19 | 2.39 | |
| NGP3088L KD1425 | 3 | 2.24 | 0.19 | 2.39 | |
| NGP3125L KC5010 | 3 | 3.18 | 0.19 | 3.81 | |
| NGP3125L KC5410 | 3 | 3.18 | 0.19 | 3.81 | |
| NGP3125L KD1425 | 3 | 3.18 | 0.19 | 3.81 | |
| NGP3156L KC5010 | 3 | 3.96 | 0.19 | 3.81 | |
| NGP3189L KC5010 | 3 | 4.80 | 0.57 | 3.81 |
NGD-L - 2 products Deep grooving. Neutral rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NGD3189L K313 | 3 | 4.80 | 0.57 | 6.35 | |
| NGD3189L KC5010 | 3 | 4.80 | 0.57 | 6.35 |
NGD-LK - 27 products Chip control geometry. Deep grooving. Light turning. 10°/Positive rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NGD3062LK KC5010 | 3 | 1.58 | 0.19 | 3.18 | |
| NGD3062LK KC5025 | 3 | 1.58 | 0.19 | 3.18 | |
| NGD3062LK KCU10 | 3 | 1.58 | 0.19 | 3.18 | |
| NGD3062LK KCU25 | 3 | 1.58 | 0.19 | 3.18 | |
| NGD3M200LK KC5010 | 3 | 2.00 | 0.19 | 4.06 | |
| NGD3M200LK KC5025 | 3 | 2.00 | 0.19 | 4.06 | |
| NGD3094LK K313 | 3 | 2.39 | 0.19 | 6.35 | |
| NGD3094LK KC5010 | 3 | 2.39 | 0.19 | 6.35 | |
| NGD3094LK KC5025 | 3 | 2.39 | 0.19 | 6.35 | |
| NGD3094LK KCU10 | 3 | 2.39 | 0.19 | 6.35 | |
| NGD3094LK KCU25 | 3 | 2.39 | 0.19 | 6.35 | |
| NGD3M250LK KC5010 | 3 | 2.50 | 0.19 | 6.35 | |
| NGD3M250LK KC5025 | 3 | 2.50 | 0.19 | 6.35 | |
| NGD3M300LK KC5010 | 3 | 3.00 | 0.19 | 6.35 | |
| NGD3M300LK KC5025 | 3 | 3.00 | 0.19 | 6.35 | |
| NGD3125LK K313 | 3 | 3.18 | 0.19 | 6.35 | |
| NGD3125LK KC5010 | 3 | 3.18 | 0.19 | 6.35 | |
| NGD3125LK KC5025 | 3 | 3.18 | 0.19 | 6.35 | |
| NGD3125LK KCU10 | 3 | 3.18 | 0.19 | 6.35 | |
| NGD3125LK KCU25 | 3 | 3.18 | 0.19 | 6.35 | |
| NGD3M350LK KC5010 | 3 | 3.50 | 0.32 | 6.35 | |
| NGD3M350LK KC5025 | 3 | 3.50 | 0.32 | 6.35 | |
| NGD3M400LK KC5010 | 3 | 4.00 | 0.32 | 6.35 | |
| NGD3M400LK KC5025 | 3 | 4.00 | 0.32 | 6.35 | |
| NGD3189LK KC5010 | 3 | 4.80 | 0.57 | 6.35 | |
| NGD3189LK KC5025 | 3 | 4.80 | 0.57 | 6.35 | |
| NGD3189LK KCU25 | 3 | 4.80 | 0.57 | 6.35 |
NR-LK - 16 products Chip control geometry. Full radius grooving turning profiling. 10°/Positive rake angle.
| Product Code | Seat | W | RC | T | |
|---|---|---|---|---|---|
| NR3031LK KC5010 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3031LK KC5025 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3031LK KCU10 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3031LK KCU25 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3047LK KC5010 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3047LK KC5025 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3047LK KCU10 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3047LK KCU25 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3062LK KC5010 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3062LK KC5025 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3062LK KCU10 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3062LK KCU25 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3078LK KC5010 | 3 | 3.96 | 1.98 | 3.81 | |
| NR3078LK KC5025 | 3 | 3.96 | 1.98 | 3.81 | |
| NR3078LK KCU10 | 3 | 3.96 | 1.98 | 3.81 | |
| NR3078LK KCU25 | 3 | 3.96 | 1.98 | 3.81 |
NRP-L - 8 products Full radius grooving. Light-turning profiling. 5°/Positive rake angle.
| Product Code | Seat | W | RC | T | |
|---|---|---|---|---|---|
| NRP3031L KC5010 | 3 | 1.58 | 0.79 | 2.39 | |
| NRP3031L KCU10 | 3 | 1.58 | 0.79 | 2.39 | |
| NRP3047L KC5010 | 3 | 2.39 | 1.19 | 3.81 | |
| NRP3047L KCU10 | 3 | 2.39 | 1.19 | 3.81 | |
| NRP3062L KC5010 | 3 | 3.18 | 1.59 | 3.81 | |
| NRP3062L KCU10 | 3 | 3.18 | 1.59 | 3.81 | |
| NRP3094L KC5010 | 3 | 4.78 | 2.39 | 3.81 | |
| NRP3094L KCU10 | 3 | 4.78 | 2.39 | 3.81 |
NU-L - 5 products Undercutting. Neutral rake angle.
| Product Code | Seat | W | RC | T | |
|---|---|---|---|---|---|
| NU3094L KC5025 | 3 | 2.39 | 0.51 | 3.18 | |
| NU3094L KCU25 | 3 | 2.39 | 0.51 | 3.18 | |
| NU3125L KC5025 | 3 | 3.18 | 1.19 | 4.78 | |
| NU3125L KCU25 | 3 | 3.18 | 1.19 | 4.78 | |
| NU3156L KC5025 | 3 | 3.96 | 1.19 | 4.78 |
NV-L - 1 products Poly Vee grooving. Neutral rake angle.
| Product Code | Seat | RC | T | |
|---|---|---|---|---|
| NV3LJ KC5025 | 3 | 0.32 | 2.21 |
NF-L - 2 products Face grooving. Additional side clearance. Neutral rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NF3125L K313 | 3 | 3.18 | 0.19 | 3.81 | |
| NF3188L KCU25 | 3 | 4.78 | 0.57 | 3.81 |
NF-LK - 5 products Face grooving with chip control. Additional side clearance. 10°/Positive rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NF3M200LK KC5025 | 3 | 2.00 | 0.19 | 1.78 | |
| NF3M300LK KC5025 | 3 | 3.00 | 0.19 | 3.81 | |
| NF3125LK KC5025 | 3 | 3.18 | 0.19 | 3.81 | |
| NF3125LK KCU25 | 3 | 3.18 | 0.19 | 3.81 | |
| NF3156LK KCU25 | 3 | 3.96 | 0.19 | 3.81 |
NFD-LK - 3 products Deep face grooving with chip control. Additional side clearance. 10°/Positive rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NFD3M300LK KC5025 | 3 | 3.00 | 0.19 | 6.35 | |
| NFD3125LK KC5025 | 3 | 3.18 | 0.19 | 6.35 | |
| NFD3125LK KCU25 | 3 | 3.18 | 0.19 | 6.35 |
NFD-LKI - 2 products Internal deep face grooving with chip control. For use in boring bars for internal face grooves. 10°/Positive rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NFD3125LKI KCU25 | 3 | 3.18 | 0.19 | 6.35 | |
| NFD3189LKI KCU25 | 3 | 4.80 | 0.57 | 6.35 |
NG-L-ST - 10 products Hard turning. Neutral rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NG3M200LS02020ST KB1630 | 3 | 2.00 | 0.20 | 2.39 | |
| NG3M200LS02020ST KB5625 | 3 | 2.00 | 0.20 | 2.39 | |
| NG3M300LS02020ST KB1630 | 3 | 3.00 | 0.20 | 3.81 | |
| NG3M300LS02020ST KB5625 | 3 | 3.00 | 0.20 | 3.81 | |
| NG3125LS0820ST KB1630 | 3 | 3.18 | 0.25 | 3.81 | |
| NG3125LS0820ST KB5625 | 3 | 3.18 | 0.25 | 3.81 | |
| NG3M400LS02020ST KB1630 | 3 | 4.00 | 0.20 | 3.81 | |
| NG3M400LS02020ST KB5625 | 3 | 4.00 | 0.20 | 3.81 | |
| NG3189LS0820ST KB1630 | 3 | 4.81 | 0.25 | 3.81 | |
| NG3189LS0820ST KB5625 | 3 | 4.81 | 0.25 | 3.81 |
Tick the related products you wish to purchase and add to cart with this Top Notch Boring Bar.
Compare Products
You have no items to compare.
My Cart
You have no items in your shopping cart.
