GBP
EUR
USDDetails
NEL3225P3
Additional Information
| SKU | 1098878 |
|---|---|
| Manufacturer | Kennametal |
| Tool Group | NEL |
| H - mm | 32.00 |
| B - mm | 25.00 |
| F - mm | 32.00 |
| L1 - mm | 170.00 |
| L2 - mm | 22.00 |
| CD | 3.80 |
| Clamp | CM72LP |
| Clamp Screw | MS2111 |
| Torx Plus | 25 IP |
| Hand of Tool | L |
| Gauge Insert | N..3R |
Related Products
Below are the related products for this Top Notch Toolholder.
Top Notch Inserts
NG-R - 61 products General-purpose grooving. O-ring grooving. Circlip grooving. Neutral rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NG3047R K313 | 3 | 1.19 | 0.19 | 1.91 | |
| NG3047R KC5010 | 3 | 1.19 | 0.19 | 1.91 | |
| NG3047R KC5025 | 3 | 1.19 | 0.19 | 1.91 | |
| NG3047R KC9110 | 3 | 1.19 | 0.19 | 1.91 | |
| NG3047R KCU10 | 3 | 1.19 | 0.19 | 1.91 | |
| NG3047R KCU25 | 3 | 1.19 | 0.19 | 1.91 | |
| NG3062R K313 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062REST KB1630 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062R KC5010 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062R KC5025 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062R KC9110 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062R KCU10 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062R KCU25 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062REST KD1425 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3072R KC5010 | 3 | 1.83 | 0.19 | 2.39 | |
| NG3072R KCU10 | 3 | 1.83 | 0.19 | 2.39 | |
| NG3078R KC5010 | 3 | 1.98 | 0.19 | 2.39 | |
| NG3078R KCU10 | 3 | 1.98 | 0.19 | 2.39 | |
| NG3088R KC5010 | 3 | 2.24 | 0.19 | 2.39 | |
| NG3088R KCU10 | 3 | 2.24 | 0.19 | 2.39 | |
| NG3088R KCU25 | 3 | 2.24 | 0.19 | 2.39 | |
| NG3094R K313 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094REST KB1630 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094R KC5010 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094R KC5025 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094R KC9110 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094R KCU10 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094R KCU25 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094REST KD1425 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3097R KC5010 | 3 | 2.46 | 0.32 | 3.81 | |
| NG3097R KCU10 | 3 | 2.46 | 0.32 | 3.81 | |
| NG3097R KCU25 | 3 | 2.46 | 0.32 | 3.81 | |
| NG3105R KC5010 | 3 | 2.67 | 0.19 | 3.81 | |
| NG3105R KC5025 | 3 | 2.67 | 0.19 | 3.81 | |
| NG3105R KCU10 | 3 | 2.67 | 0.19 | 3.81 | |
| NG3105R KCU25 | 3 | 2.67 | 0.19 | 3.81 | |
| NG3110R KC5025 | 3 | 2.79 | 0.32 | 3.81 | |
| NG3110R KCU25 | 3 | 2.79 | 0.32 | 3.81 | |
| NG3122R KCU25 | 3 | 3.10 | 0.19 | 3.81 | |
| NG3125R K313 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125REST KB1630 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125R KC5010 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125R KC5025 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125R KC9110 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125R KCU10 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125R KCU25 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125REST KD1425 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3142R KC5010 | 3 | 3.61 | 0.32 | 3.81 | |
| NG3142R KCU25 | 3 | 3.61 | 0.32 | 3.81 | |
| NG3156R KC5010 | 3 | 3.96 | 0.19 | 3.81 | |
| NG3156R KC5025 | 3 | 3.96 | 0.19 | 3.81 | |
| NG3156R KCU10 | 3 | 3.96 | 0.19 | 3.81 | |
| NG3156R KCU25 | 3 | 3.96 | 0.19 | 3.81 | |
| NG3178R KC5025 | 3 | 4.52 | 0.19 | 3.81 | |
| NG3185R KCU25 | 3 | 4.70 | 0.57 | 3.81 | |
| NG3189R K313 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189R KC5010 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189R KC5025 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189R KCU10 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189R KCU25 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189REST KD1425 | 3 | 4.80 | 0.57 | 3.81 |
NR-R - 31 products Full radius grooving. Turning profiling. Neutral rake angle.
| Product Code | Seat | W | RC | T | |
|---|---|---|---|---|---|
| NR3031R KC5025 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3M100R KC5025 | 3 | 2.00 | 1.00 | 2.39 | |
| NR3M150R KC5025 | 3 | 3.00 | 1.50 | 3.81 | |
| NR3062R KC5025 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3M200R KC5025 | 3 | 4.00 | 2.00 | 3.81 | |
| NR3M225R KC5025 | 3 | 4.50 | 2.25 | 3.81 | |
| NR3094R KC5025 | 3 | 4.78 | 2.39 | 3.81 | |
| NR3031R K313 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3031R KC5010 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3031R KCU10 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3031R KCU25 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3M100R KC9320 | 3 | 2.00 | 1.00 | 2.39 | |
| NR3047R K313 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3047R KC5010 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3047R KCU10 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3047R KCU25 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3M125R KC9110 | 3 | 2.50 | 1.25 | 3.81 | |
| NR3M125R KC9320 | 3 | 2.50 | 1.25 | 3.81 | |
| NR3M150R KC9320 | 3 | 3.00 | 1.50 | 3.81 | |
| NR3062R K313 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3062R KC5010 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3062R KCU10 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3062R KCU25 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3M175R KC9320 | 3 | 3.50 | 1.75 | 3.81 | |
| NR3078R K313 | 3 | 3.96 | 1.98 | 3.81 | |
| NR3M200R KC9320 | 3 | 4.00 | 2.00 | 3.81 | |
| NR3M225R KC9320 | 3 | 4.50 | 2.25 | 3.81 | |
| NR3094R K313 | 3 | 4.78 | 2.39 | 3.81 | |
| NR3094R KC5010 | 3 | 4.78 | 2.39 | 3.81 | |
| NR3094R KCU10 | 3 | 4.78 | 2.39 | 3.81 | |
| NR3094R KCU25 | 3 | 4.78 | 2.39 | 3.81 |
NR-L - 31 products Full radius grooving. Turning profiling. Neutral rake angle.
| Product Code | Seat | W | RC | T | |
|---|---|---|---|---|---|
| NR3031L KC5025 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3M100L KC5025 | 3 | 2.00 | 1.00 | 2.39 | |
| NR3M150L KC5025 | 3 | 3.00 | 1.50 | 3.81 | |
| NR3062L KC5025 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3M200L KC5025 | 3 | 4.00 | 2.00 | 3.81 | |
| NR3M225L KC5025 | 3 | 4.50 | 2.25 | 3.81 | |
| NR3094L KC5025 | 3 | 4.78 | 2.39 | 3.81 | |
| NR3031L K313 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3031L KC5010 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3031L KCU10 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3031L KCU25 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3M100L KC9320 | 3 | 2.00 | 1.00 | 2.39 | |
| NR3047L K313 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3047L KC5010 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3047L KCU10 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3047L KCU25 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3M125L KC9320 | 3 | 2.50 | 1.25 | 3.81 | |
| NR3M150L KC5010 | 3 | 3.00 | 1.50 | 3.81 | |
| NR3M150L KC9320 | 3 | 3.00 | 1.50 | 3.81 | |
| NR3M150L KCU10 | 3 | 3.00 | 1.50 | 3.81 | |
| NR3062L K313 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3062L KC5010 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3062L KCU10 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3062L KCU25 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3M175L KC9320 | 3 | 3.50 | 1.75 | 3.81 | |
| NR3M200L KC9320 | 3 | 4.00 | 2.00 | 3.81 | |
| NR3M225L KC9320 | 3 | 4.50 | 2.25 | 3.81 | |
| NR3094L K313 | 3 | 4.78 | 2.39 | 3.81 | |
| NR3094L KC5010 | 3 | 4.78 | 2.39 | 3.81 | |
| NR3094L KCU10 | 3 | 4.78 | 2.39 | 3.81 | |
| NR3094L KCU25 | 3 | 4.78 | 2.39 | 3.81 |
NRD-R - 8 products Deep grooving. Full radius endform. Neutral rake angle.
| Product Code | Seat | W | RC | T | |
|---|---|---|---|---|---|
| NRD3031R KC5025 | 3 | 1.58 | 0.79 | 3.18 | |
| NRD3062R KC5025 | 3 | 3.18 | 1.59 | 6.35 | |
| NRD3031R KC5010 | 3 | 1.58 | 0.79 | 3.18 | |
| NRD3031R KCU10 | 3 | 1.58 | 0.79 | 3.18 | |
| NRD3031R KCU25 | 3 | 1.58 | 0.79 | 3.18 | |
| NRD3062R KC5010 | 3 | 3.18 | 1.59 | 6.35 | |
| NRD3062R KCU10 | 3 | 3.18 | 1.59 | 6.35 | |
| NRD3062R KCU25 | 3 | 3.18 | 1.59 | 6.35 |
NRD-L - 8 products Deep grooving. Full radius endform. Neutral rake angle.
| Product Code | Seat | W | RC | T | |
|---|---|---|---|---|---|
| NRD3031L KC5025 | 3 | 1.58 | 0.79 | 3.18 | |
| NRD3062L KC5025 | 3 | 3.18 | 1.59 | 6.35 | |
| NRD3031L KC5010 | 3 | 1.58 | 0.79 | 3.18 | |
| NRD3031L KCU10 | 3 | 1.58 | 0.79 | 3.18 | |
| NRD3031L KCU25 | 3 | 1.58 | 0.79 | 3.18 | |
| NRD3062L KC5010 | 3 | 3.18 | 1.59 | 6.35 | |
| NRD3062L KCU10 | 3 | 3.18 | 1.59 | 6.35 | |
| NRD3062L KCU25 | 3 | 3.18 | 1.59 | 6.35 |
NU-R - 5 products Undercutting. Neutral rake angle.
| Product Code | Seat | W | RC | T | |
|---|---|---|---|---|---|
| NU3094R KC5025 | 3 | 2.39 | 0.51 | 3.18 | |
| NU3125R KC5025 | 3 | 3.18 | 1.19 | 4.78 | |
| NU3156R KC5025 | 3 | 3.96 | 1.19 | 4.78 | |
| NU3094R KCU25 | 3 | 2.39 | 0.51 | 3.18 | |
| NU3125R KCU25 | 3 | 3.18 | 1.19 | 4.78 |
NG-R-ST - 10 products Hard turning. Neutral rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NG3M200RS02020ST KB5625 | 3 | 2.00 | 0.20 | 2.39 | |
| NG3M300RS02020ST KB5625 | 3 | 3.00 | 0.20 | 3.81 | |
| NG3125RS0820ST KB5625 | 3 | 3.18 | 0.25 | 3.81 | |
| NG3M400RS02020ST KB5625 | 3 | 4.00 | 0.20 | 3.81 | |
| NG3189RS0820ST KB5625 | 3 | 4.81 | 0.25 | 3.81 | |
| NG3M200RS02020ST KB1630 | 3 | 2.00 | 0.20 | 2.39 | |
| NG3M300RS02020ST KB1630 | 3 | 3.00 | 0.20 | 3.81 | |
| NG3125RS0820ST KB1630 | 3 | 3.18 | 0.25 | 3.81 | |
| NG3M400RS02020ST KB1630 | 3 | 4.00 | 0.20 | 3.81 | |
| NG3189RS0820ST KB1630 | 3 | 4.81 | 0.25 | 3.81 |
NG-RK - 104 products Chip control geometry. General-purpose grooving. O-ring grooving. Circlip grooving. Light turning. 10°/Positive rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NG3M100RK KC5025 | 3 | 1.00 | 0.19 | 1.91 | |
| NG3M100RK KCU25 | 3 | 1.00 | 0.19 | 1.91 | |
| NG3047RK KC5010 | 3 | 1.19 | 0.19 | 1.91 | |
| NG3047RK KC5025 | 3 | 1.19 | 0.19 | 1.91 | |
| NG3047RK KC9110 | 3 | 1.19 | 0.19 | 1.91 | |
| NG3047RK KCU10 | 3 | 1.19 | 0.19 | 1.91 | |
| NG3047RK KCU25 | 3 | 1.19 | 0.19 | 1.91 | |
| NG3M120RK KC5010 | 3 | 1.20 | 0.19 | 1.91 | |
| NG3M120RK KC5025 | 3 | 1.20 | 0.19 | 1.91 | |
| NG3M120RK KCU10 | 3 | 1.20 | 0.19 | 1.91 | |
| NG3M120RK KCU25 | 3 | 1.20 | 0.19 | 1.91 | |
| NG3M150RK KC5025 | 3 | 1.50 | 0.19 | 2.39 | |
| NG3M150RK KC9320 | 3 | 1.50 | 0.19 | 2.39 | |
| NG3M150RK KCU25 | 3 | 1.50 | 0.19 | 2.39 | |
| NG3M150RK KT315 | 3 | 1.50 | 0.19 | 2.39 | |
| NG3062RK KC5010 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062RK KC5025 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062RK KC9110 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062RK KC9320 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062RK KCU10 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062RK KCU25 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3062RK KT315 | 3 | 1.58 | 0.19 | 2.39 | |
| NG3M175RK KC5025 | 3 | 1.75 | 0.19 | 2.39 | |
| NG3M175RK KCU25 | 3 | 1.75 | 0.19 | 2.39 | |
| NG3072RK KC5010 | 3 | 1.83 | 0.19 | 2.39 | |
| NG3072RK KC5025 | 3 | 1.83 | 0.19 | 2.39 | |
| NG3072RK KCU10 | 3 | 1.83 | 0.19 | 2.39 | |
| NG3072RK KCU25 | 3 | 1.83 | 0.19 | 2.39 | |
| NG3078RK KC5010 | 3 | 1.98 | 0.19 | 2.39 | |
| NG3078RK KC5025 | 3 | 1.98 | 0.19 | 2.39 | |
| NG3078RK KC9110 | 3 | 1.98 | 0.19 | 2.39 | |
| NG3078RK KCU10 | 3 | 1.98 | 0.19 | 2.39 | |
| NG3078RK KCU25 | 3 | 1.98 | 0.19 | 2.39 | |
| NG3M200RK KC5025 | 3 | 2.00 | 0.19 | 2.39 | |
| NG3M200RK KC9110 | 3 | 2.00 | 0.19 | 2.39 | |
| NG3M200RK KC9320 | 3 | 2.00 | 0.19 | 2.39 | |
| NG3M200RK KCU25 | 3 | 2.00 | 0.19 | 2.39 | |
| NG3M200RK KT315 | 3 | 2.00 | 0.19 | 2.39 | |
| NG3M220RK KC5025 | 3 | 2.20 | 0.19 | 2.39 | |
| NG3M220RK KCU25 | 3 | 2.20 | 0.19 | 2.39 | |
| NG3M225RK KC5010 | 3 | 2.24 | 0.19 | 2.39 | |
| NG3M225RK KC5025 | 3 | 2.24 | 0.19 | 2.39 | |
| NG3M225RK KC9110 | 3 | 2.24 | 0.19 | 2.39 | |
| NG3M225RK KC9320 | 3 | 2.24 | 0.19 | 2.39 | |
| NG3M225RK KCU10 | 3 | 2.24 | 0.19 | 2.39 | |
| NG3M225RK KCU25 | 3 | 2.24 | 0.19 | 2.39 | |
| NG3094RK KC5010 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094RK KC5025 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094RK KC9110 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094RK KCU10 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094RK KCU25 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3094RK KT315 | 3 | 2.39 | 0.19 | 3.81 | |
| NG3M250RK KC5025 | 3 | 2.50 | 0.19 | 3.81 | |
| NG3M250RK KC9110 | 3 | 2.50 | 0.19 | 3.81 | |
| NG3M250RK KC9320 | 3 | 2.50 | 0.19 | 3.81 | |
| NG3M250RK KCU25 | 3 | 2.50 | 0.19 | 3.81 | |
| NG3M250RK KT315 | 3 | 2.50 | 0.19 | 3.81 | |
| NG3M275RK KC5010 | 3 | 2.75 | 0.19 | 3.81 | |
| NG3M275RK KC5025 | 3 | 2.75 | 0.19 | 3.81 | |
| NG3M275RK KCU10 | 3 | 2.75 | 0.19 | 3.81 | |
| NG3M275RK KCU25 | 3 | 2.75 | 0.19 | 3.81 | |
| NG3M300RK KC5010 | 3 | 3.00 | 0.19 | 3.81 | |
| NG3M300RK KC5025 | 3 | 3.00 | 0.19 | 3.81 | |
| NG3M300RK KC9110 | 3 | 3.00 | 0.19 | 3.81 | |
| NG3M300RK KC9320 | 3 | 3.00 | 0.19 | 3.81 | |
| NG3M300RK KCU10 | 3 | 3.00 | 0.19 | 3.81 | |
| NG3M300RK KCU25 | 3 | 3.00 | 0.19 | 3.81 | |
| NG3M300RK KT315 | 3 | 3.00 | 0.19 | 3.81 | |
| NG3125RK KC5010 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125RK KC5025 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125RK KC9110 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125RK KCU10 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125RK KCU25 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3125RK KT315 | 3 | 3.18 | 0.19 | 3.81 | |
| NG3M320RK KC5025 | 3 | 3.20 | 0.19 | 3.81 | |
| NG3M320RK KCU25 | 3 | 3.20 | 0.19 | 3.81 | |
| NG3M325RK KC5025 | 3 | 3.25 | 0.19 | 3.81 | |
| NG3M325RK KCU25 | 3 | 3.25 | 0.19 | 3.81 | |
| NG3M350RK KC5025 | 3 | 3.50 | 0.32 | 3.81 | |
| NG3M350RK KCU25 | 3 | 3.50 | 0.32 | 3.81 | |
| NG3M350RK KT315 | 3 | 3.50 | 0.32 | 3.81 | |
| NG3156RK KC5010 | 3 | 3.96 | 0.19 | 3.81 | |
| NG3156RK KC5025 | 3 | 3.96 | 0.19 | 3.81 | |
| NG3156RK KCU10 | 3 | 3.96 | 0.19 | 3.81 | |
| NG3156RK KCU25 | 3 | 3.96 | 0.19 | 3.81 | |
| NG3M400RK KC5010 | 3 | 3.99 | 0.32 | 3.81 | |
| NG3M400RK KC5025 | 3 | 3.99 | 0.32 | 3.81 | |
| NG3M400RK KC9110 | 3 | 3.99 | 0.32 | 3.81 | |
| NG3M400RK KC9320 | 3 | 3.99 | 0.32 | 3.81 | |
| NG3M400RK KCU10 | 3 | 3.99 | 0.32 | 3.81 | |
| NG3M400RK KCU25 | 3 | 3.99 | 0.32 | 3.81 | |
| NG3M400RK KT315 | 3 | 3.99 | 0.32 | 3.81 | |
| NG3M425RK KC5010 | 3 | 4.24 | 0.32 | 3.81 | |
| NG3M425RK KC5025 | 3 | 4.24 | 0.32 | 3.81 | |
| NG3M425RK KCU10 | 3 | 4.24 | 0.32 | 3.81 | |
| NG3M425RK KCU25 | 3 | 4.24 | 0.32 | 3.81 | |
| NG3M450RK KCU25 | 3 | 4.50 | 0.32 | 3.81 | |
| NG3189RK KC5010 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189RK KC5025 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189RK KC9110 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189RK KC9320 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189RK KCU10 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189RK KCU25 | 3 | 4.80 | 0.57 | 3.81 | |
| NG3189RK KT315 | 3 | 4.80 | 0.57 | 3.81 |
NGP-R - 10 products General-purpose grooving. O-ring grooving. Circlip grooving. 5°/Positive rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NGP3088R KC5010 | 3 | 2.24 | 0.19 | 2.39 | |
| NGP3088R KC5410 | 3 | 2.24 | 0.19 | 2.39 | |
| NGP3088R KCU10 | 3 | 2.24 | 0.19 | 2.39 | |
| NGP3088R KD1425 | 3 | 2.24 | 0.19 | 2.39 | |
| NGP3125R KC5010 | 3 | 3.18 | 0.19 | 3.81 | |
| NGP3125R KC5410 | 3 | 3.18 | 0.19 | 3.81 | |
| NGP3125R KCU10 | 3 | 3.18 | 0.19 | 3.81 | |
| NGP3125R KD1425 | 3 | 3.18 | 0.19 | 3.81 | |
| NGP3156R KC5010 | 3 | 3.96 | 0.19 | 3.81 | |
| NGP3189R KC5010 | 3 | 4.80 | 0.57 | 3.81 |
NGD-R - 2 products Deep grooving. Neutral rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NGD3189R K313 | 3 | 4.80 | 0.57 | 6.35 | |
| NGD3189R KC5010 | 3 | 4.80 | 0.57 | 6.35 |
NGD-RK - 28 products Chip control geometry. Deep grooving. Light turning. 10°/Positive rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NGD3062RK K313 | 3 | 1.58 | 0.19 | 3.18 | |
| NGD3062RK KC5010 | 3 | 1.58 | 0.19 | 3.18 | |
| NGD3062RK KC5025 | 3 | 1.58 | 0.19 | 3.18 | |
| NGD3062RK KCU10 | 3 | 1.58 | 0.19 | 3.18 | |
| NGD3062RK KCU25 | 3 | 1.58 | 0.19 | 3.18 | |
| NGD3M200RK KC5010 | 3 | 2.00 | 0.19 | 4.06 | |
| NGD3M200RK KC5025 | 3 | 2.00 | 0.19 | 4.06 | |
| NGD3094RK K313 | 3 | 2.39 | 0.19 | 6.35 | |
| NGD3094RK KC5010 | 3 | 2.39 | 0.19 | 6.35 | |
| NGD3094RK KC5025 | 3 | 2.39 | 0.19 | 6.35 | |
| NGD3094RK KCU10 | 3 | 2.39 | 0.19 | 6.35 | |
| NGD3094RK KCU25 | 3 | 2.39 | 0.19 | 6.35 | |
| NGD3M250RK KC5010 | 3 | 2.50 | 0.19 | 6.35 | |
| NGD3M250RK KC5025 | 3 | 2.50 | 0.19 | 6.35 | |
| NGD3M300RK KC5010 | 3 | 3.00 | 0.19 | 6.35 | |
| NGD3M300RK KC5025 | 3 | 3.00 | 0.19 | 6.35 | |
| NGD3125RK K313 | 3 | 3.18 | 0.19 | 6.35 | |
| NGD3125RK KC5010 | 3 | 3.18 | 0.19 | 6.35 | |
| NGD3125RK KC5025 | 3 | 3.18 | 0.19 | 6.35 | |
| NGD3125RK KCU10 | 3 | 3.18 | 0.19 | 6.35 | |
| NGD3125RK KCU25 | 3 | 3.18 | 0.19 | 6.35 | |
| NGD3M350RK KC5010 | 3 | 3.50 | 0.32 | 6.35 | |
| NGD3M350RK KC5025 | 3 | 3.50 | 0.32 | 6.35 | |
| NGD3M400RK KC5010 | 3 | 4.00 | 0.32 | 6.35 | |
| NGD3M400RK KC5025 | 3 | 4.00 | 0.32 | 6.35 | |
| NGD3189RK KC5010 | 3 | 4.80 | 0.57 | 6.35 | |
| NGD3189RK KC5025 | 3 | 4.80 | 0.57 | 6.35 | |
| NGD3189RK KCU25 | 3 | 4.80 | 0.57 | 6.35 |
NR-RK - 15 products Chip control geometry. Full radius grooving turning profiling. 10°/Positive rake angle.
| Product Code | Seat | W | RC | T | |
|---|---|---|---|---|---|
| NR3031RK KC5010 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3031RK KC5025 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3031RK KCU10 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3031RK KCU25 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3047RK KC5010 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3047RK KC5025 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3047RK KCU10 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3047RK KCU25 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3062RK KC5010 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3062RK KC5025 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3062RK KCU10 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3062RK KCU25 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3078RK KC5010 | 3 | 3.96 | 1.98 | 3.81 | |
| NR3078RK KCU10 | 3 | 3.96 | 1.98 | 3.81 | |
| NR3078RK KCU25 | 3 | 3.96 | 1.98 | 3.81 |
NR-LK - 16 products Chip control geometry. Full radius grooving turning profiling. 10°/Positive rake angle.
| Product Code | Seat | W | RC | T | |
|---|---|---|---|---|---|
| NR3031LK KC5010 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3031LK KC5025 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3031LK KCU10 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3031LK KCU25 | 3 | 1.58 | 0.79 | 2.39 | |
| NR3047LK KC5010 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3047LK KC5025 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3047LK KCU10 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3047LK KCU25 | 3 | 2.39 | 1.19 | 3.81 | |
| NR3062LK KC5010 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3062LK KC5025 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3062LK KCU10 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3062LK KCU25 | 3 | 3.18 | 1.59 | 3.81 | |
| NR3078LK KC5010 | 3 | 3.96 | 1.98 | 3.81 | |
| NR3078LK KC5025 | 3 | 3.96 | 1.98 | 3.81 | |
| NR3078LK KCU10 | 3 | 3.96 | 1.98 | 3.81 | |
| NR3078LK KCU25 | 3 | 3.96 | 1.98 | 3.81 |
NRP-R - 10 products Full radius grooving. Light-turning profiling. 5°/Positive rake angle.
| Product Code | Seat | W | RC | T | |
|---|---|---|---|---|---|
| NRP3031R KC5010 | 3 | 1.58 | 0.79 | 2.39 | |
| NRP3031R KC5410 | 3 | 1.58 | 0.79 | 2.39 | |
| NRP3031R KCU10 | 3 | 1.58 | 0.79 | 2.39 | |
| NRP3047R K313 | 3 | 2.39 | 1.19 | 3.81 | |
| NRP3047R KC5010 | 3 | 2.39 | 1.19 | 3.81 | |
| NRP3047R KCU10 | 3 | 2.39 | 1.19 | 3.81 | |
| NRP3062R KC5010 | 3 | 3.18 | 1.59 | 3.81 | |
| NRP3062R KCU10 | 3 | 3.18 | 1.59 | 3.81 | |
| NRP3094R KC5010 | 3 | 4.78 | 2.39 | 3.81 | |
| NRP3094R KCU10 | 3 | 4.78 | 2.39 | 3.81 |
NRP-L - 8 products Full radius grooving. Light-turning profiling. 5°/Positive rake angle.
| Product Code | Seat | W | RC | T | |
|---|---|---|---|---|---|
| NRP3031L KC5010 | 3 | 1.58 | 0.79 | 2.39 | |
| NRP3031L KCU10 | 3 | 1.58 | 0.79 | 2.39 | |
| NRP3047L KC5010 | 3 | 2.39 | 1.19 | 3.81 | |
| NRP3047L KCU10 | 3 | 2.39 | 1.19 | 3.81 | |
| NRP3062L KC5010 | 3 | 3.18 | 1.59 | 3.81 | |
| NRP3062L KCU10 | 3 | 3.18 | 1.59 | 3.81 | |
| NRP3094L KC5010 | 3 | 4.78 | 2.39 | 3.81 | |
| NRP3094L KCU10 | 3 | 4.78 | 2.39 | 3.81 |
NV-R - 1 products Poly Vee grooving. Neutral rake angle.
| Product Code | Seat | RC | T | |
|---|---|---|---|---|
| NV3RJ KCU25 | 3 | 0.32 | 2.21 |
NF-R - 2 products Face grooving. Additional side clearance. Neutral rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NF3125R K313 | 3 | 3.18 | 0.19 | 3.81 | |
| NF3188R KCU25 | 3 | 4.78 | 0.57 | 3.81 |
NF-RK - 5 products Face grooving with chip control. Additional side clearance. 10°/Positive rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NF3M200RK KC5025 | 3 | 2.00 | 0.19 | 1.78 | |
| NF3M300RK KC5025 | 3 | 3.00 | 0.19 | 3.81 | |
| NF3125RK KC5025 | 3 | 3.18 | 0.19 | 3.81 | |
| NF3125RK KCU25 | 3 | 3.18 | 0.19 | 3.81 | |
| NF3156RK KCU25 | 3 | 3.96 | 0.19 | 3.81 |
NFD-RK - 3 products Deep face grooving with chip control. Additional side clearance. 10°/Positive rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NFD3M300RK KC5025 | 3 | 3.00 | 0.19 | 6.35 | |
| NFD3125RK KC5025 | 3 | 3.18 | 0.19 | 6.35 | |
| NFD3125RK KCU25 | 3 | 3.18 | 0.19 | 6.35 |
NFD-RKI - 4 products Internal deep face grooving with chip control. For use in boring bars for internal face grooves. 10°/Positive rake angle.
| Product Code | Seat | W | RR | T | |
|---|---|---|---|---|---|
| NFD3125RKI KC5025 | 3 | 3.18 | 0.19 | 6.35 | |
| NFD3125RKI KCU25 | 3 | 3.18 | 0.19 | 6.35 | |
| NFD3156RKI KC5025 | 3 | 3.96 | 0.19 | 6.35 | |
| NFD3189RKI KCU25 | 3 | 4.80 | 0.57 | 6.35 |
Tick the related products you wish to purchase and add to cart with this Top Notch Toolholder.
Compare Products
You have no items to compare.
My Cart
You have no items in your shopping cart.
