GBP
EUR
USD- Home /
- Kennametal Tools /
- Kennametal Turning Tools /
- Kennametal Turning Toolholders /
- Kennametal External /
- Kennametal ISO Toolholders /
- SDJCL2020K11
Details
SDJCL2020K11
Additional Information
| SKU | 1098003 |
|---|---|
| Manufacturer | Kennametal |
| Tool Group | SDJC 93 DEGREE |
| Holder Style | SDJC |
| Clamping Style | Screw-On |
| H - mm | 20.00 |
| B - mm | 20.00 |
| F - mm | 25.00 |
| L1 - mm | 125.00 |
| L2 - mm | 22.00 |
| Gauge Insert | DC..11T308 |
| Insert Type | Positive |
| Torx Plus | T15 |
| Hex - mm | 3.50 |
| Insert Screw | MS1156 |
| Hand of Tool | L |
Related Products
Below are the related products for this ISO Toolholder.
CBN Inserts
DCGW - 6 products Positive CBN Insert for Light/Medium Machining
| Product Code | D | L10 | Rε | |
|---|---|---|---|---|
| DCGW11T304S01015MT KBH20 | 9.52 | 11.63 | 0.40 | |
| DCGW11T308S01015FWMT KBH20 | 9.52 | 11.63 | 0.80 | |
| DCGW11T308S01015MT KBH20 | 9.52 | 11.63 | 0.80 | |
| DCGW11T302S01225MT KBH20 | 9.52 | 11.63 | 0.20 | |
| DCGW11T304S01225MT KBH20 | 9.52 | 11.63 | 0.40 | |
| DCGW11T308S01225MT KBH20 | 9.52 | 11.63 | 0.80 |
DCGM - 1 products Positive CBN Insert with Chip Breaker
| Product Code | D | L10 | Rε | |
|---|---|---|---|---|
| DCGM11T304S01325MTCB1 KBH20 | 9.52 | 11.63 | 0.40 |
ISO Inserts
DCGT-HP - 12 products Positive ISO insert for Finishing machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| DCGT11T302HP K313 | 9.53 | 11.63 | 0.20 | 3.97 | 4.40 | Finishing | ||
| DCGT11T302HP KC5410 | 9.53 | 11.63 | 0.20 | 3.97 | 4.40 | Finishing | ||
| DCGT11T302HP KCU10 | 9.53 | 11.63 | 0.20 | 0.00 | 0.00 | Finishing | ||
| DCGT11T302HP KCU25 | 9.53 | 11.63 | 0.20 | 3.97 | 4.40 | Finishing | ||
| DCGT11T304HP K313 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCGT11T304HP KC5410 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCGT11T304HP KCU10 | 9.53 | 11.63 | 0.40 | 0.00 | 0.00 | Finishing | ||
| DCGT11T304HP KCU25 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCGT11T308HP K313 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCGT11T308HP KC5410 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCGT11T308HP KCU10 | 9.53 | 11.63 | 0.80 | 0.00 | 0.00 | Finishing | ||
| DCGT11T308HP KCU25 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing |
DCMT - 4 products Positive ISO insert for Finishing machining.
| Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|
| DCMT11T30411 KT315 | 9.53 | 11.63 | 0.40 | Finishing | ||
| DCMT11T30411 KT325 | 9.53 | 11.63 | 0.40 | Finishing | ||
| DCMT11T30811 KT315 | 9.53 | 11.63 | 0.80 | Finishing | ||
| DCMT11T30811 KT325 | 9.53 | 11.63 | 0.80 | Finishing |
DCMT-FP - 31 products Positive ISO insert for Finishing machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| DCMT11T302FP KTP10 | 9.53 | 11.63 | 0.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304FP KTP10 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308FP KTP10 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T302FP KCM25 | 9.53 | 11.63 | 0.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T302FP KCP10 | 9.53 | 11.63 | 0.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T302FP KCP25 | 9.53 | 11.63 | 0.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T302FP KCU10 | 9.53 | 11.63 | 0.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T302FP KCU25 | 9.53 | 11.63 | 0.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304FP KCK20 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304FP KCM15 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304FP KCM25 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304FP KCP05 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304FP KCP10 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304FP KCP25 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304FP KCU10 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304FP KCU25 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308FP KCK20 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308FP KCM15 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308FP KCM25 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308FP KCP05 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308FP KCP10 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308FP KCP25 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308FP KCU10 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308FP KCU25 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T312FP KCP10 | 9.53 | 11.63 | 1.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T312FP KCU10 | 9.53 | 11.63 | 1.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T302FP KCP10B | 9.53 | 11.63 | 0.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T302FP KCP25B | 9.53 | 11.63 | 0.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304FP KCP10B | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304FP KCP25B | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308FP KCP10B | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing |
DCGT-LF - 1 products Positive ISO insert for Finishing machining.
| Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|
| DCGT11T301LF KCU10 | 9.53 | 11.63 | 0.10 | Finishing |
DCMT-LF - 39 products Positive ISO insert for Finishing machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| DCMT11T302LF KT315 | 9.53 | 11.63 | 0.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304LF KT315 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308LF KT315 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T312LF KT315 | 9.53 | 11.63 | 1.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T302LF K313 | 9.53 | 11.63 | 0.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304LF K313 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304LF KCK05 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304LF KCK15 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304LF KCK20 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304LF KCM15 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304LF KCM25 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304LF KCM35 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304LF KCP05 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304LF KCP10 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304LF KCP25 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304LF KCP30 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308LF K313 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308LF KCK05 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308LF KCK15 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308LF KCK20 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308LF KCM15 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308LF KCM25 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308LF KCM35 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308LF KCP05 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308LF KCP10 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308LF KCP25 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308LF KCP30 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308LF KCU10 | 9.53 | 11.63 | 0.80 | 0.00 | 0.00 | Finishing | ||
| DCMT11T312LF KCK05 | 9.53 | 11.63 | 1.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T312LF KCK20 | 9.53 | 11.63 | 1.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T312LF KCP10 | 9.53 | 11.63 | 1.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T312LF KCP25 | 9.53 | 11.63 | 1.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304LF KCK15B | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304LF KCP10B | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304LF KCP25B | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308LF KCK15B | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308LF KCP10B | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308LF KCP25B | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T312LF KCP10B | 9.53 | 11.63 | 1.20 | 3.97 | 4.40 | Finishing |
DCMT-MW - 7 products Positive ISO insert for Wiper Medium machining.
| Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|
| DCMT11T308MW KT315 | 9.53 | 11.63 | 0.80 | Wiper Medium | ||
| DCMT11T304MW KCK20 | 9.53 | 11.63 | 0.40 | Wiper Medium | ||
| DCMT11T304MW KCP25 | 9.53 | 11.63 | 0.40 | Wiper Medium | ||
| DCMT11T304MW KCU10 | 9.53 | 11.63 | 0.40 | Wiper Medium | ||
| DCMT11T308MW KCK20 | 9.53 | 11.63 | 0.80 | Wiper Medium | ||
| DCMT11T308MW KCP25 | 9.53 | 11.63 | 0.80 | Wiper Medium | ||
| DCMT11T308MW KCU10 | 9.53 | 11.63 | 0.80 | Wiper Medium |
DCMT-FW - 8 products Positive ISO insert for Wiper Finishing machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| DCMT11T304FW KCK20 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Wiper Finishing | ||
| DCMT11T304FW KCP25 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Wiper Finishing | ||
| DCMT11T304FW KCU10 | 9.53 | 11.63 | 0.40 | 0.00 | 0.00 | Wiper Finishing | ||
| DCMT11T304FW KT315 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Wiper Finishing | ||
| DCMT11T308FW KCK20 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Wiper Finishing | ||
| DCMT11T308FW KCP25 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Wiper Finishing | ||
| DCMT11T308FW KCU10 | 9.53 | 11.63 | 0.80 | 0.00 | 0.00 | Wiper Finishing | ||
| DCMT11T308FW KT315 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Wiper Finishing |
DCMT-MF - 28 products Positive ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| DCMT11T304MF KCK15 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Medium | ||
| DCMT11T304MF KCK20 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Medium | ||
| DCMT11T304MF KCM15 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Medium | ||
| DCMT11T304MF KCM25 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Medium | ||
| DCMT11T304MF KCP10 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Medium | ||
| DCMT11T304MF KCP25 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Medium | ||
| DCMT11T304MF KCP30 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Medium | ||
| DCMT11T308MF KCK15 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Medium | ||
| DCMT11T308MF KCK20 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Medium | ||
| DCMT11T308MF KCM15 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Medium | ||
| DCMT11T308MF KCM25 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Medium | ||
| DCMT11T308MF KCM35 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Medium | ||
| DCMT11T308MF KCP10 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Medium | ||
| DCMT11T308MF KCP25 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Medium | ||
| DCMT11T308MF KCP30 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Medium | ||
| DCMT11T312MF KCK15 | 9.53 | 11.63 | 1.20 | 3.97 | 4.40 | Medium | ||
| DCMT11T312MF KCK20 | 9.53 | 11.63 | 1.20 | 3.97 | 4.40 | Medium | ||
| DCMT11T312MF KCM15 | 9.53 | 11.63 | 1.20 | 3.97 | 4.40 | Medium | ||
| DCMT11T312MF KCM25 | 9.53 | 11.63 | 1.20 | 3.97 | 4.40 | Medium | ||
| DCMT11T312MF KCP10 | 9.53 | 11.63 | 1.20 | 3.97 | 4.40 | Medium | ||
| DCMT11T312MF KCP25 | 9.53 | 11.63 | 1.20 | 3.97 | 4.40 | Medium | ||
| DCMT11T304MF KCP10B | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Medium | ||
| DCMT11T304MF KCP25B | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Medium | ||
| DCMT11T308MF KCK15B | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Medium | ||
| DCMT11T308MF KCP10B | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Medium | ||
| DCMT11T308MF KCP25B | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Medium | ||
| DCMT11T312MF KCP10B | 9.53 | 11.63 | 1.20 | 3.97 | 4.40 | Medium | ||
| DCMT11T312MF KCP25B | 9.53 | 11.63 | 1.20 | 3.97 | 4.40 | Medium |
DCMT-MP - 10 products Positive ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| DCMT11T304MP KCK20 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Medium | ||
| DCMT11T304MP KCP10 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Medium | ||
| DCMT11T304MP KCP25 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Medium | ||
| DCMT11T308MP KCK20 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Medium | ||
| DCMT11T308MP KCM15 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Medium | ||
| DCMT11T308MP KCM25 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Medium | ||
| DCMT11T308MP KCP10 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Medium | ||
| DCMT11T308MP KCP25 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Medium | ||
| DCMT11T312MP KCP10 | 9.53 | 11.63 | 1.20 | 3.97 | 4.40 | Medium | ||
| DCMT11T312MP KCP25 | 9.53 | 11.63 | 1.20 | 3.97 | 4.40 | Medium |
DCMT-UF - 14 products Positive ISO insert for Finishing machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| DCMT11T302UF KCP05 | 9.53 | 11.63 | 0.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T302UF KCP10 | 9.53 | 11.63 | 0.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T302UF KCP25 | 9.53 | 11.63 | 0.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304UF KCP05 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304UF KCP10 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304UF KCP25 | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308UF KCP05 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308UF KCP10 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308UF KCP25 | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing | ||
| DCMT11T302UF KCP10B | 9.53 | 11.63 | 0.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T302UF KCP25B | 9.53 | 11.63 | 0.20 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304UF KCP10B | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T304UF KCP25B | 9.53 | 11.63 | 0.40 | 3.97 | 4.40 | Finishing | ||
| DCMT11T308UF KCP10B | 9.53 | 11.63 | 0.80 | 3.97 | 4.40 | Finishing |
ISO Select Inserts
DCGT-F - 2 products Positive ISO Select Inserts for Tough grade, interruped cut machining.
| Product Code | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|
| DCGT11T301F K10U | 11.63 | 0.10 | Fine Finishing | ||
| DCGT11T301F K15U | 11.63 | 0.10 | Fine Finishing |
DCMT-F - 19 products Positive ISO Select Inserts for General purpose machining.
| Product Code | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|
| DCMT11T302F K10U | 11.63 | 0.20 | Finishing | ||
| DCMT11T302F K15U | 11.63 | 0.20 | Finishing | ||
| DCMT11T304F K10M | 11.63 | 0.40 | Finishing | ||
| DCMT11T304F K10P | 11.63 | 0.40 | Finishing | ||
| DCMT11T304F K10U | 11.63 | 0.40 | Finishing | ||
| DCMT11T304F K15U | 11.63 | 0.40 | Finishing | ||
| DCMT11T304F K20K | 11.63 | 0.40 | Finishing | ||
| DCMT11T304F K25M | 11.63 | 0.40 | Finishing | ||
| DCMT11T304F K25P | 11.63 | 0.40 | Finishing | ||
| DCMT11T308F K10M | 11.63 | 0.80 | Finishing | ||
| DCMT11T308F K10P | 11.63 | 0.80 | Finishing | ||
| DCMT11T308F K10U | 11.63 | 0.80 | Finishing | ||
| DCMT11T308F K20K | 11.63 | 0.80 | Finishing | ||
| DCMT11T308F K25M | 11.63 | 0.80 | Finishing | ||
| DCMT11T308F K25P | 11.63 | 0.80 | Finishing | ||
| DCMT11T312F K10M | 11.63 | 1.20 | Finishing | ||
| DCMT11T312F K10P | 11.63 | 1.20 | Finishing | ||
| DCMT11T312F K10U | 11.63 | 1.20 | Finishing | ||
| DCMT11T312F K20K | 11.63 | 1.20 | Finishing |
Tick the related products you wish to purchase and add to cart with this ISO Toolholder.
Compare Products
You have no items to compare.
My Cart
You have no items in your shopping cart.
