GBP
EUR
USD- Home /
- Kennametal Tools /
- Kennametal Turning Tools /
- Kennametal Turning Toolholders /
- Kennametal External /
- Kennametal ISO Toolholders /
- DWLNR2525M06KC04
Details
DWLNR2525M06KC04
Additional Information
| SKU | 2273451 |
|---|---|
| Manufacturer | Kennametal |
| Tool Group | DWLN-KC 95 DEGREE |
| Holder Style | DWLN |
| Clamping Style | Kenclamp |
| H - mm | 25.00 |
| B - mm | 25.00 |
| F - mm | 32.00 |
| L1 - mm | 150.00 |
| L2 - mm | 25.00 |
| Gauge Insert | WN..060408 |
| Insert Type | Negative |
| Torx Plus | 15 IP |
| Clamp Asssembly | CM234R ASSY |
| Slotted Pin | SSP025016M |
| Optional Lock Pin | KLM34L9IP |
| Hand of Tool | R |
Related Products
Below are the related products for this ISO Toolholder.
ISO Inserts
WNMA - 6 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| WNMA060408 K20K | 9.53 | 6.52 | 0.80 | 0.00 | 0.00 | Medium | ||
| WNMA060408 KCK05 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Medium | ||
| WNMA060408 KCK15 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Medium | ||
| WNMA060408 KCK20 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Medium | ||
| WNMA060412 KCK15 | 9.53 | 6.52 | 1.20 | 4.76 | 3.81 | Medium | ||
| WNMA060412 KCK20 | 9.53 | 6.52 | 1.20 | 4.76 | 3.81 | Medium |
WNMG-FF - 8 products Negative ISO insert for Finishing machining.
| Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|
| WNMG060404FF KT315 | 9.53 | 6.52 | 0.40 | Finishing | ||
| WNMG060408FF KT315 | 9.53 | 6.52 | 0.80 | Finishing | ||
| WNMG060404FF KC5010 | 9.53 | 6.52 | 0.40 | Finishing | ||
| WNMG060404FF KCP10 | 9.53 | 6.52 | 0.40 | Finishing | ||
| WNMG060404FF KCU10 | 9.53 | 6.52 | 0.40 | Finishing | ||
| WNMG060408FF KC5010 | 9.53 | 6.52 | 0.80 | Finishing | ||
| WNMG060408FF KCP10 | 9.53 | 6.52 | 0.80 | Finishing | ||
| WNMG060408FF KCU10 | 9.53 | 6.52 | 0.80 | Finishing |
WNMG-FP - 9 products Negative ISO insert for Finishing machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| WNMG060404FP KC5010 | 9.53 | 6.52 | 0.40 | 4.76 | 3.81 | Finishing | ||
| WNMG060404FP KCM15 | 9.53 | 6.52 | 0.40 | 4.76 | 3.81 | Finishing | ||
| WNMG060404FP KCU10 | 9.53 | 6.52 | 0.40 | 0.00 | 0.00 | Finishing | ||
| WNMG060404FP KT315 | 9.53 | 6.52 | 0.40 | 4.76 | 3.81 | Finishing | ||
| WNMG060408FP KC5010 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Finishing | ||
| WNMG060408FP KCM15 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Finishing | ||
| WNMG060408FP KCP10 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Finishing | ||
| WNMG060408FP KCU10 | 9.53 | 6.52 | 0.80 | 0.00 | 0.00 | Finishing | ||
| WNMG060408FP KT315 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Finishing |
WNMG-FW - 14 products Negative ISO insert for Wiper Finishing machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| WNMG060404FW KC5010 | 9.53 | 6.52 | 0.40 | 4.76 | 3.81 | Wiper Finishing | ||
| WNMG060404FW KCP05 | 9.53 | 6.52 | 0.40 | 4.76 | 3.81 | Wiper Finishing | ||
| WNMG060404FW KCP10 | 9.53 | 6.52 | 0.40 | 4.76 | 3.81 | Wiper Finishing | ||
| WNMG060404FW KCU10 | 9.53 | 6.52 | 0.40 | 0.00 | 0.00 | Wiper Finishing | ||
| WNMG060404FW KT315 | 9.53 | 6.52 | 0.40 | 4.76 | 3.81 | Wiper Finishing | ||
| WNMG060408FW KC5010 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Wiper Finishing | ||
| WNMG060408FW KCP05 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Wiper Finishing | ||
| WNMG060408FW KCP10 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Wiper Finishing | ||
| WNMG060408FW KCU10 | 9.53 | 6.52 | 0.80 | 0.00 | 0.00 | Wiper Finishing | ||
| WNMG060408FW KT315 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Wiper Finishing | ||
| WNMG060412FW KC5010 | 9.53 | 6.52 | 1.20 | 4.76 | 3.81 | Wiper Finishing | ||
| WNMG060412FW KCP05 | 9.53 | 6.52 | 1.20 | 4.76 | 3.81 | Wiper Finishing | ||
| WNMG060412FW KCP10 | 9.53 | 6.52 | 1.20 | 4.76 | 3.81 | Wiper Finishing | ||
| WNMG060404FW KCP10B | 9.53 | 6.52 | 0.40 | 4.76 | 3.81 | Wiper Finishing |
WNMG-MN - 10 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| WNMG060404MN KCP10 | 9.53 | 6.52 | 0.40 | 4.76 | 3.81 | Medium | ||
| WNMG060404MN KCP25 | 9.53 | 6.52 | 0.40 | 4.76 | 3.81 | Medium | ||
| WNMG060408MN KCP10 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Medium | ||
| WNMG060408MN KCP25 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Medium | ||
| WNMG060408MN KCP30 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Medium | ||
| WNMG060412MN KCP10 | 9.53 | 6.52 | 1.20 | 4.76 | 3.81 | Medium | ||
| WNMG060412MN KCP25 | 9.53 | 6.52 | 1.20 | 4.76 | 3.81 | Medium | ||
| WNMG060404MN KCP10B | 9.53 | 6.52 | 0.40 | 4.76 | 3.81 | Medium | ||
| WNMG060408MN KCP10B | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Medium | ||
| WNMG060408MN KCP25B | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Medium |
WNMG-MP - 10 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| WNMG060404MP KCM15 | 9.53 | 6.52 | 0.40 | 4.76 | 3.81 | Medium | ||
| WNMG060404MP KCM25 | 9.53 | 6.52 | 0.40 | 4.76 | 3.81 | Medium | ||
| WNMG060404MP KCU10 | 9.53 | 6.52 | 0.40 | 0.00 | 0.00 | Medium | ||
| WNMG060408MP KCM15 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Medium | ||
| WNMG060408MP KCM25 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Medium | ||
| WNMG060408MP KCM35 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Medium | ||
| WNMG060408MP KCP10 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Medium | ||
| WNMG060408MP KCP25 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Medium | ||
| WNMG060408MP KCU10 | 9.53 | 6.52 | 0.80 | 0.00 | 0.00 | Medium | ||
| WNMG060412MP KCM25 | 9.53 | 6.52 | 1.20 | 4.76 | 3.81 | Medium |
WNMG-MS - 2 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| WNMG060408MS K313 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Medium | ||
| WNMG060408MS KCU25 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Medium |
WNMG-MW - 5 products Negative ISO insert for Wiper Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| WNMG060408MW KCP05 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Wiper Medium | ||
| WNMG060408MW KCP10 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Wiper Medium | ||
| WNMG060408MW KCP25 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Wiper Medium | ||
| WNMG060412MW KCP10 | 9.53 | 6.52 | 1.20 | 4.76 | 3.81 | Wiper Medium | ||
| WNMG060412MW KCP25 | 9.53 | 6.52 | 1.20 | 4.76 | 3.81 | Wiper Medium |
WNMG-RN - 6 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| WNMG060408RN KCP10 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Rough | ||
| WNMG060408RN KCP25 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Rough | ||
| WNMG060412RN KCP10 | 9.53 | 6.52 | 1.20 | 4.76 | 3.81 | Rough | ||
| WNMG060412RN KCP25 | 9.53 | 6.52 | 1.20 | 4.76 | 3.81 | Rough | ||
| WNMG060408RN KCP10B | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Rough | ||
| WNMG060408RN KCP25B | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Rough |
WNMG-RP - 13 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| WNMG060408RP KC5010 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Rough | ||
| WNMG060408RP KCK20 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Rough | ||
| WNMG060408RP KCM15 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Rough | ||
| WNMG060408RP KCM25 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Rough | ||
| WNMG060408RP KCP10 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Rough | ||
| WNMG060408RP KCP25 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Rough | ||
| WNMG060408RP KCU10 | 9.53 | 6.52 | 0.80 | 0.00 | 0.00 | Rough | ||
| WNMG060408RP KCU25 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Rough | ||
| WNMG060412RP KCK20 | 9.53 | 6.52 | 1.20 | 4.76 | 3.81 | Rough | ||
| WNMG060412RP KCP10 | 9.53 | 6.52 | 1.20 | 4.76 | 3.81 | Rough | ||
| WNMG060412RP KCP25 | 9.53 | 6.52 | 1.20 | 4.76 | 3.81 | Rough | ||
| WNMG060408MS KCU10 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | Medium | ||
| WNMG060408RP KCP10B | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Rough |
WNMG-UN - 9 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| WNMG060404UN KCK05 | 9.53 | 6.52 | 0.40 | 4.76 | 3.81 | Rough | ||
| WNMG060404UN KCK15 | 9.53 | 6.52 | 0.40 | 4.76 | 3.81 | Rough | ||
| WNMG060404UN KCK20 | 9.53 | 6.52 | 0.40 | 4.76 | 3.81 | Rough | ||
| WNMG060408UN KCK05 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Rough | ||
| WNMG060408UN KCK15 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Rough | ||
| WNMG060408UN KCK20 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Rough | ||
| WNMG060412UN KCK05 | 9.53 | 6.52 | 1.20 | 4.76 | 3.81 | Rough | ||
| WNMG060412UN KCK15 | 9.53 | 6.52 | 1.20 | 4.76 | 3.81 | Rough | ||
| WNMG060412UN KCK20 | 9.53 | 6.52 | 1.20 | 4.76 | 3.81 | Rough |
WNMG-UP - 2 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| WNMG060408UP KCM15 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Rough | ||
| WNMG060408UP KCM25 | 9.53 | 6.52 | 0.80 | 4.76 | 3.81 | Rough |
ISO Select Inserts
WNMG-R - 4 products Negative ISO Select Inserts for General purpose machining.
| Product Code | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|
| WNMG060408R K10M | 6.52 | 0.80 | Rough Positive | ||
| WNMG060408R K10P | 6.52 | 0.80 | Rough Positive | ||
| WNMG060408R K25M | 6.52 | 0.80 | Rough Positive | ||
| WNMG060408R K25P | 6.52 | 0.80 | Rough Positive |
Tick the related products you wish to purchase and add to cart with this ISO Toolholder.
Compare Products
You have no items to compare.
My Cart
You have no items in your shopping cart.
