GBP
EUR
USD- Home /
- Kennametal Tools /
- Kennametal Turning Tools /
- Kennametal Turning Toolholders /
- Kennametal External /
- Kennametal ISO Toolholders /
- DSSNR3232P15KC06
Details
DSSNR3232P15KC06
Additional Information
| SKU | 2273157 |
|---|---|
| Manufacturer | Kennametal |
| Tool Group | DSSN-KC 45 DEGREE |
| Holder Style | DSSN |
| Clamping Style | Kenclamp |
| H - mm | 32.00 |
| B - mm | 32.00 |
| F - mm | 40.00 |
| L1 - mm | 170.00 |
| L2 - mm | 40.30 |
| L1A - mm | 10.73 |
| FA - mm | 10.73 |
| Gauge Insert | SN..150612 |
| Insert Type | Negative |
| Torx Plus | 15 IP |
| Clamp Asssembly | CM209R ASSY |
| Slotted Pin | SSP025016M |
| Optional Lock Pin | KLM58L15IP |
| Hand of Tool | R |
Related Products
Below are the related products for this ISO Toolholder.
ISO Inserts
SNGG-LF - 2 products Negative ISO insert for Finishing machining.
| Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|
| SNGG150612LF KC5010 | 15.88 | 15.88 | 1.20 | Finishing | ||
| SNGG150612LF KCU10 | 15.88 | 15.88 | 1.20 | Finishing |
SNMA - 6 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMA150612 KCK05 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Medium | ||
| SNMA150612 KCK15 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Medium | ||
| SNMA150612 KCK20 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Medium | ||
| SNMA150616 KCK05 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Medium | ||
| SNMA150616 KCK20 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Medium | ||
| SNMA150612 KCK15B | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Medium |
SNMG-MN - 7 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMG150612MN KCP40 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Medium | ||
| SNMG150612MN KCP10 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Medium | ||
| SNMG150612MN KCP25 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Medium | ||
| SNMG150616MN KCP25 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Medium | ||
| SNMG150612MN KCP10B | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Medium | ||
| SNMG150612MN KCP25B | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Medium | ||
| SNMG150616MN KCP25B | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Medium |
SNMG-RN - 12 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMG150612RN KCP40 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150616RN KCP40 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough | ||
| SNMG150608RN KCP10 | 15.88 | 15.88 | 0.80 | 6.35 | 6.35 | Rough | ||
| SNMG150612RN KCP10 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150612RN KCP25 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150612RN KCP30 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150616RN KCP10 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough | ||
| SNMG150616RN KCP25 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough | ||
| SNMG150616RN KCP30 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough | ||
| SNMG150612RN KCP10B | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150612RN KCP25B | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150616RN KCP25B | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough |
SNMG-RP - 18 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMG150612RP KCP40 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150612RP KCK15 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150612RP KCM15 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150612RP KCM25 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150612RP KCM35 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150612RP KCP10 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150612RP KCP25 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150612RP KCP30 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150616RP KCK20 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough | ||
| SNMG150616RP KCM15 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough | ||
| SNMG150616RP KCM25 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough | ||
| SNMG150616RP KCP10 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough | ||
| SNMG150616RP KCP25 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough | ||
| SNMG150616RP KCP30 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough | ||
| SNMG150612RP KCK15B | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150612RP KCP10B | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150612RP KCP25B | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150616RP KCP10B | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough |
SNMM-RP - 5 products Negative ISO insert for Rough Single Sided machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMM150612RP KCP40 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough Single Sided | ||
| SNMM150612RP KCP25 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough Single Sided | ||
| SNMM150616RP KCP10 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough Single Sided | ||
| SNMM150612RP KCM25 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough Single Sided | ||
| SNMM150616RP KCM25 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough Single Sided |
SNMG-MP - 6 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMG150608MP KCM15 | 15.88 | 15.88 | 0.80 | 6.35 | 6.35 | Medium | ||
| SNMG150608MP KCM25 | 15.88 | 15.88 | 0.80 | 6.35 | 6.35 | Medium | ||
| SNMG150612MP KCM15 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Medium | ||
| SNMG150612MP KCM25 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Medium | ||
| SNMG150612MP KCU10 | 15.88 | 15.88 | 1.20 | 0.00 | 0.00 | Medium | ||
| SNMG150616MP KCM25 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Medium |
SNMG-MS - 4 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMG150608MS KC5525 | 15.88 | 15.88 | 0.80 | 6.35 | 6.35 | Medium | ||
| SNMG150608MS KCU25 | 15.88 | 15.88 | 0.80 | 6.35 | 6.35 | Medium | ||
| SNMG150612MS KC5525 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Medium | ||
| SNMG150612MS KCU25 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Medium |
SNMG-UN - 8 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMG150612UN KCK05 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150612UN KCK15 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150612UN KCK20 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150616UN KCK05 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough | ||
| SNMG150616UN KCK15 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough | ||
| SNMG150616UN KCK20 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough | ||
| SNMG150612UN KCK15B | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough | ||
| SNMG150616UN KCK15B | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough |
SNMG-UP - 5 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|
| SNMG150612UP KC5010 | 15.88 | 15.88 | 1.20 | Rough | ||
| SNMG150612UP KCM15 | 15.88 | 15.88 | 1.20 | Rough | ||
| SNMG150612UP KCM25 | 15.88 | 15.88 | 1.20 | Rough | ||
| SNMG150612UP KCM35 | 15.88 | 15.88 | 1.20 | Rough | ||
| SNMG150612UP KCU10 | 15.88 | 15.88 | 1.20 | Rough |
SNMM-RM - 6 products Negative ISO insert for Rough Single Sided machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMM150612RM KCP10 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough Single Sided | ||
| SNMM150612RM KCP25 | 15.88 | 15.88 | 1.20 | 6.35 | 6.35 | Rough Single Sided | ||
| SNMM150616RM KCP10 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough Single Sided | ||
| SNMM150616RM KCP25 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough Single Sided | ||
| SNMM150616RM KCP30 | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough Single Sided | ||
| SNMM150616RM KCP25B | 15.88 | 15.88 | 1.60 | 6.35 | 6.35 | Rough Single Sided |
ISO Select Inserts
SNMA - 1 products Negative ISO Select Inserts for General Purpose machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMA150612 K20K | 15.88 | 15.88 | 1.20 | 0.00 | 0.00 | Rough |
SNMG-H - 6 products Negative ISO Select Inserts for Tough grade, interruped cut machining.
| Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|
| SNMG150612H K20K | 15.88 | 15.88 | 1.20 | Rough | ||
| SNMG150612H K25P | 15.88 | 15.88 | 1.20 | Rough | ||
| SNMG150612H K35P | 15.88 | 15.88 | 1.20 | Rough | ||
| SNMG150616H K20K | 15.88 | 15.88 | 1.60 | Rough | ||
| SNMG150616H K25P | 15.88 | 15.88 | 1.60 | Rough | ||
| SNMG150616H K35P | 15.88 | 15.88 | 1.60 | Rough |
Tick the related products you wish to purchase and add to cart with this ISO Toolholder.
Compare Products
You have no items to compare.
My Cart
You have no items in your shopping cart.
