GBP
EUR
USD- Home /
- Kennametal Tools /
- Kennametal Turning Tools /
- Kennametal Turning Toolholders /
- Kennametal External /
- Kennametal ISO Toolholders /
- DSSNL3232P19KC06
Details
DSSNL3232P19KC06
Additional Information
| SKU | 2273161 |
|---|---|
| Manufacturer | Kennametal |
| Tool Group | DSSN-KC 45 DEGREE |
| Holder Style | DSSN |
| Clamping Style | Kenclamp |
| H - mm | 32.00 |
| B - mm | 32.00 |
| F - mm | 40.00 |
| L1 - mm | 170.00 |
| L2 - mm | 44.00 |
| L1A - mm | 10.73 |
| FA - mm | 10.73 |
| Gauge Insert | SN..190612 |
| Insert Type | Negative |
| Torx Plus | 25 IP |
| Clamp Asssembly | CM210R ASSY |
| Slotted Pin | SSP025016M |
| Optional Lock Pin | KLM68L25IP |
| Hand of Tool | L |
Related Products
Below are the related products for this ISO Toolholder.
ISO Inserts
SNMA - 10 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMA190612 KCK05 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Medium | ||
| SNMA190612 KCK15 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Medium | ||
| SNMA190612 KCK20 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Medium | ||
| SNMA190616 KCK05 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Medium | ||
| SNMA190616 KCK15 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Medium | ||
| SNMA190616 KCK20 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Medium | ||
| SNMA190612 K68 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Medium | ||
| SNMA190616 K68 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Medium | ||
| SNMA190612 KCK15B | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Medium | ||
| SNMA190616 KCK15B | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Medium |
SNMG - 1 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMG190612 K68 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Medium |
SNMG-B - 1 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMG190616B K68 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Medium |
SNMG-MN - 5 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMG190612MN KCP10 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Medium | ||
| SNMG190612MN KCP25 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Medium | ||
| SNMG190612MN KCP40 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Medium | ||
| SNMG190616MN KCP25 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Medium | ||
| SNMG190612MN KCP25B | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Medium |
SNMG-RM - 5 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMG190612RM KCP40 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190616RM KCP40 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough | ||
| SNMG190612RM KCP25 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190616RM KCP25 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough | ||
| SNMG190616RM KCP30 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough |
SNMG-RN - 16 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMG190612RN KCP40 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190608RN KCP25 | 19.05 | 19.05 | 0.80 | 6.35 | 7.93 | Rough | ||
| SNMG190608RN KCP30 | 19.05 | 19.05 | 0.80 | 6.35 | 7.93 | Rough | ||
| SNMG190612RN KCP10 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190612RN KCP25 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190612RN KCP30 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190616RN KCP10 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough | ||
| SNMG190616RN KCP25 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough | ||
| SNMG190616RN KCP30 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough | ||
| SNMG190624RN KCP25 | 19.05 | 19.05 | 2.40 | 6.35 | 7.93 | Rough | ||
| SNMG190624RN KCP30 | 19.05 | 19.05 | 2.40 | 6.35 | 7.93 | Rough | ||
| SNMG190608RN KCP25B | 19.05 | 19.05 | 0.80 | 6.35 | 7.93 | Rough | ||
| SNMG190612RN KCP10B | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190612RN KCP25B | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190616RN KCP25B | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough | ||
| SNMG190624RN KCP25B | 19.05 | 19.05 | 2.40 | 6.35 | 7.93 | Rough |
SNMG-MP - 7 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|
| SNMG190612MP KCM15 | 19.05 | 19.05 | 1.20 | Medium | ||
| SNMG190612MP KCM25 | 19.05 | 19.05 | 1.20 | Medium | ||
| SNMG190612MP KCM35 | 19.05 | 19.05 | 1.20 | Medium | ||
| SNMG190612MP KCU10 | 19.05 | 19.05 | 1.20 | Medium | ||
| SNMG190616MP KCM25 | 19.05 | 19.05 | 1.60 | Medium | ||
| SNMG190616MP KCM35 | 19.05 | 19.05 | 1.60 | Medium | ||
| SNMG190616MP KCU10 | 19.05 | 19.05 | 1.60 | Medium |
SNMG-RP - 16 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMG190612RP KCP40 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190616RP KCP40 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough | ||
| SNMG190612RP KCK20 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190612RP KCM15 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190612RP KCM25 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190612RP KCM35 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190612RP KCP10 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190612RP KCP25 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190612RP KCP30 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190616RP KCK20 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough | ||
| SNMG190616RP KCM25 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough | ||
| SNMG190616RP KCM35 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough | ||
| SNMG190616RP KCP10 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough | ||
| SNMG190616RP KCP25 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough | ||
| SNMG190612RP KCP25B | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190616RP KCP25B | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough |
SNMM-RH - 14 products Negative ISO insert for Rough Single Sided machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMM190616RH KCP40 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190624RH KCP40 | 19.05 | 19.05 | 2.40 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190612RH KCP10 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190612RH KCP25 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190612RH KCP30 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190616RH KCP10 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190616RH KCP25 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190616RH KCP30 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190624RH KCP10 | 19.05 | 19.05 | 2.40 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190624RH KCP25 | 19.05 | 19.05 | 2.40 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190624RH KCP30 | 19.05 | 19.05 | 2.40 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190612RH KCP25B | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190616RH KCP25B | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190624RH KCP25B | 19.05 | 19.05 | 2.40 | 6.35 | 7.93 | Rough Single Sided |
SNMG-MS - 2 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMG190612MS KCU10 | 19.05 | 19.05 | 1.20 | 0.00 | 0.00 | Medium | ||
| SNMG190612MS KCU25 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Medium |
SNMM-RM - 12 products Negative ISO insert for Rough Single Sided machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMM190612RM KCP40 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190612RM KCP10 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190612RM KCP25 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190612RM KCP30 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190616RM KCP10 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190616RM KCP25 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190616RM KCP30 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190624RM KCP25 | 19.05 | 19.05 | 2.40 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190624RM KCP30 | 19.05 | 19.05 | 2.40 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190612RM KCP25B | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190616RM KCP25B | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190624RM KCP25B | 19.05 | 19.05 | 2.40 | 6.35 | 7.93 | Rough Single Sided |
SNMM-RP - 10 products Negative ISO insert for Rough Single Sided machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMM190612RP KCP40 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190616RP KCP40 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190612RP KCP25 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190616RP KCP25 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190624RP KCP25 | 19.05 | 19.05 | 2.40 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190612RP KCM25 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190616RP KCM25 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190624RP KCM25 | 19.05 | 19.05 | 2.40 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190616RP KCP25B | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough Single Sided | ||
| SNMM190624RP KCP25B | 19.05 | 19.05 | 2.40 | 6.35 | 7.93 | Rough Single Sided |
SNMS - 2 products Negative ISO insert for Medium Roughing machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMS190612 K68 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Medium Roughing | ||
| SNMS190612 KC5410 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Medium Roughing |
SNMG-UN - 7 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMG190612UN KCK05 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190612UN KCK15 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190612UN KCK20 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190616UN KCK05 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough | ||
| SNMG190616UN KCK15 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough | ||
| SNMG190616UN KCK20 | 19.05 | 19.05 | 1.60 | 6.35 | 7.93 | Rough | ||
| SNMG190612UN KCK15B | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough |
SNMG-UP - 3 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMG190612UP KCM15 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190612UP KCM25 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough | ||
| SNMG190612UP KCM35 | 19.05 | 19.05 | 1.20 | 6.35 | 7.93 | Rough |
ISO Select Inserts
SNMA - 1 products Negative ISO Select Inserts for General Purpose machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| SNMA190612 K20K | 19.05 | 19.05 | 1.20 | 0.00 | 0.00 | Rough |
SNMG-H - 6 products Negative ISO Select Inserts for Tough grade, interruped cut machining.
| Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|
| SNMG190612H K20K | 19.05 | 19.05 | 1.20 | Rough | ||
| SNMG190612H K25P | 19.05 | 19.05 | 1.20 | Rough | ||
| SNMG190612H K35P | 19.05 | 19.05 | 1.20 | Rough | ||
| SNMG190616H K20K | 19.05 | 19.05 | 1.60 | Rough | ||
| SNMG190616H K25P | 19.05 | 19.05 | 1.60 | Rough | ||
| SNMG190616H K35P | 19.05 | 19.05 | 1.60 | Rough |
SNMG-R - 5 products Negative ISO Select Inserts for Tough grade, interruped cut machining.
| Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|
| SNMG190612R K10M | 19.05 | 19.05 | 1.20 | Rough | ||
| SNMG190612R K25M | 19.05 | 19.05 | 1.20 | Rough | ||
| SNMG190612R K25P | 19.05 | 19.05 | 1.20 | Rough | ||
| SNMG190612R K35P | 19.05 | 19.05 | 1.20 | Rough | ||
| SNMG190616R K35P | 19.05 | 19.05 | 1.60 | Rough |
Tick the related products you wish to purchase and add to cart with this ISO Toolholder.
Compare Products
You have no items to compare.
My Cart
You have no items in your shopping cart.
