GBP
EUR
USD- Home /
- Kennametal Tools /
- Kennametal Turning Tools /
- Kennametal Turning Toolholders /
- Kennametal External /
- Kennametal ISO Toolholders /
- DCLNR3225P16KC06
Details
DCLNR3225P16KC06
Additional Information
| SKU | 1875232 |
|---|---|
| Manufacturer | Kennametal |
| Tool Group | DCLN-KC 95 DEGREE |
| Holder Style | DCLN |
| Clamping Style | Kenclamp |
| H - mm | 32.00 |
| B - mm | 25.00 |
| F - mm | 32.00 |
| L1 - mm | 170.00 |
| L2 - mm | 33.00 |
| Gauge Insert | CN..160612 |
| Insert Type | Negative |
| Torx Plus | 15 IP |
| Clamp Asssembly | CM209R ASSY |
| Slotted Pin | SSP025016M |
| Optional Lock Pin | KLM58L15IP |
| Hand of Tool | R |
Related Products
Below are the related products for this ISO Toolholder.
ISO Inserts
CNGG-LF - 5 products Negative ISO insert for Finishing machining.
| Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|
| CNGG160608LF KC5010 | 15.88 | 16.12 | 0.80 | Finishing | ||
| CNGG160608LF KCU10 | 15.88 | 16.12 | 0.80 | Finishing | ||
| CNGG160612LF KC5010 | 15.88 | 16.12 | 1.20 | Finishing | ||
| CNGG160612LF KC730 | 15.88 | 16.12 | 1.20 | Finishing | ||
| CNGG160612LF KCU10 | 15.88 | 16.12 | 1.20 | Finishing |
CNMA - 9 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| CNMA160608 KCK15 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Medium | ||
| CNMA160608 KCK20 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough | ||
| CNMA160612 KCK05 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Finishing | ||
| CNMA160612 KCK15 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Medium | ||
| CNMA160612 KCK20 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough | ||
| CNMA160616 KCK05 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Finishing | ||
| CNMA160616 KCK15 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Medium | ||
| CNMA160616 KCK20 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough | ||
| CNMA160616 KCK15B | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Medium |
CNMG-RN - 16 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| CNMG160612RN KCP40 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough | ||
| CNMG160616RN KCP40 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough | ||
| CNMG160608RN KCP10 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough | ||
| CNMG160608RN KCP25 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough | ||
| CNMG160608RN KCP30 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough | ||
| CNMG160612RN KCP10 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough | ||
| CNMG160612RN KCP25 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough | ||
| CNMG160612RN KCP30 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough | ||
| CNMG160616RN KCP10 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough | ||
| CNMG160616RN KCP25 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough | ||
| CNMG160608RN KCP10B | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough | ||
| CNMG160608RN KCP25B | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough | ||
| CNMG160612RN KCP10B | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough | ||
| CNMG160612RN KCP25B | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough | ||
| CNMG160616RN KCP10B | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough | ||
| CNMG160616RN KCP25B | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough |
CNMG-RP - 31 products Negative ISO insert for Rough Positive machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| CNMG160612RP KCP40 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160608RP KC5510 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160608RP KCK20 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160608RP KCM15 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160608RP KCP10 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160608RP KCP25 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160608RP KCU10 | 15.88 | 16.12 | 0.80 | 0.00 | 0.00 | Rough Positive | ||
| CNMG160608RP KCU25 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160612RP KC5510 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160612RP KCK05 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160612RP KCK15 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160612RP KCK20 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160612RP KCM15 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160612RP KCM25 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160612RP KCM35 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160612RP KCP10 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160612RP KCP25 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160612RP KCP30 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160612RP KCU10 | 15.88 | 16.12 | 1.20 | 0.00 | 0.00 | Rough Positive | ||
| CNMG160612RP KCU25 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160616RP KCK20 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160616RP KCM25 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160616RP KCP10 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160616RP KCP25 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160616RP KCP30 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160616RP KCU10 | 15.88 | 16.12 | 1.60 | 0.00 | 0.00 | Rough Positive | ||
| CNMG160608RP KCP25B | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160612RP KCP10B | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160612RP KCP25B | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160616RP KCP10B | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Positive | ||
| CNMG160616RP KCP25B | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Positive |
CNMM-RP - 21 products Negative ISO insert for Rough Single Sided machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| CNMM160608RP KCP40 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160612RP KCP40 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160616RP KCP40 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160608RP KCP25 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160612RP KCM15 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160612RP KCM25 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160612RP KCM35 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160612RP KCP05 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160612RP KCP10 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160612RP KCP25 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160612RP KCP30 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160616RP KCM15 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160616RP KCM25 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160616RP KCP05 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160616RP KCP10 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160616RP KCP25 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160616RP KCP30 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160608RP KCP25B | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160612RP KCP10B | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160616RP KCP10B | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160616RP KCP25B | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Single Sided |
CNMG-MN - 15 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| CNMG160608MN KCP10 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Medium | ||
| CNMG160608MN KCP25 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Medium | ||
| CNMG160608MN KCP30 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Medium | ||
| CNMG160612MN KCP05 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Medium | ||
| CNMG160612MN KCP10 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Medium | ||
| CNMG160612MN KCP25 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Medium | ||
| CNMG160612MN KCP30 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Medium | ||
| CNMG160616MN KCP10 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Medium | ||
| CNMG160616MN KCP25 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Medium | ||
| CNMG160608MN KCP10B | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Medium | ||
| CNMG160608MN KCP25B | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Medium | ||
| CNMG160612MN KCP10B | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Medium | ||
| CNMG160612MN KCP25B | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Medium | ||
| CNMG160616MN KCP10B | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Medium | ||
| CNMG160616MN KCP25B | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Medium |
CNMG-MP - 15 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|
| CNMG160608MP KC5010 | 15.88 | 16.12 | 0.80 | Medium | ||
| CNMG160608MP KCM15 | 15.88 | 16.12 | 0.80 | Medium | ||
| CNMG160608MP KCM25 | 15.88 | 16.12 | 0.80 | Medium | ||
| CNMG160608MP KCM35 | 15.88 | 16.12 | 0.80 | Medium | ||
| CNMG160608MP KCU10 | 15.88 | 16.12 | 0.80 | Medium | ||
| CNMG160612MP KC5010 | 15.88 | 16.12 | 1.20 | Medium | ||
| CNMG160612MP KCM15 | 15.88 | 16.12 | 1.20 | Medium | ||
| CNMG160612MP KCM25 | 15.88 | 16.12 | 1.20 | Medium | ||
| CNMG160612MP KCM35 | 15.88 | 16.12 | 1.20 | Medium | ||
| CNMG160612MP KCU10 | 15.88 | 16.12 | 1.20 | Medium | ||
| CNMG160612MP KCU25 | 15.88 | 16.12 | 1.20 | Medium | ||
| CNMG160616MP KC5010 | 15.88 | 16.12 | 1.60 | Medium | ||
| CNMG160616MP KCM25 | 15.88 | 16.12 | 1.60 | Medium | ||
| CNMG160616MP KCM35 | 15.88 | 16.12 | 1.60 | Medium | ||
| CNMG160616MP KCU10 | 15.88 | 16.12 | 1.60 | Medium |
CNMG-MS - 5 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| CNMG160608MS KCU10 | 15.88 | 16.12 | 0.80 | 0.00 | 0.00 | Medium | ||
| CNMG160608MS KCU25 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Medium | ||
| CNMG160612MS K313 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Medium | ||
| CNMG160612MS KCU10 | 15.88 | 16.12 | 1.20 | 0.00 | 0.00 | Medium | ||
| CNMG160612MS KCU25 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Medium |
CNMG-UN - 12 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| CNMG160608UN KCK05 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough | ||
| CNMG160608UN KCK15 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough | ||
| CNMG160608UN KCK20 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough | ||
| CNMG160612UN KCK05 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough | ||
| CNMG160612UN KCK15 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough | ||
| CNMG160612UN KCK20 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough | ||
| CNMG160616UN KCK05 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough | ||
| CNMG160616UN KCK15 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough | ||
| CNMG160616UN KCK20 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough | ||
| CNMG160608UN KCK15B | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough | ||
| CNMG160612UN KCK15B | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough | ||
| CNMG160616UN KCK15B | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough |
CNMG-UP - 6 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| CNMG160608UP KCM15 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough | ||
| CNMG160608UP KCM25 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough | ||
| CNMG160608UP KCM35 | 15.88 | 16.12 | 0.80 | 6.35 | 6.35 | Rough | ||
| CNMG160612UP KCM15 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough | ||
| CNMG160612UP KCM25 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough | ||
| CNMG160612UP KCM35 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough |
CNMM-RM - 13 products Negative ISO insert for Rough Single Sided machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| CNMM160612RM KCP10 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160612RM KCP25 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160612RM KCP30 | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160616RM KCP10 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160616RM KCP25 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160616RM KCP30 | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160624RM KCP10 | 15.88 | 16.12 | 2.40 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160624RM KCP25 | 15.88 | 16.12 | 2.40 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160612RM KCP10B | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160612RM KCP25B | 15.88 | 16.12 | 1.20 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160616RM KCP10B | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160616RM KCP25B | 15.88 | 16.12 | 1.60 | 6.35 | 6.35 | Rough Single Sided | ||
| CNMM160624RM KCP25B | 15.88 | 16.12 | 2.40 | 6.35 | 6.35 | Rough Single Sided |
ISO Select Inserts
CNMA - 2 products Negative ISO Select Inserts for General purpose machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| CNMA160612 K20K | 15.88 | 16.12 | 1.20 | 0.00 | 0.00 | Roughing | ||
| CNMA160616 K20K | 15.88 | 16.12 | 1.60 | 0.00 | 0.00 | Roughing |
CNMG-H - 7 products Negative ISO Select Inserts for General purpose machining.
| Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|
| CNMG160612H K10P | 15.88 | 16.12 | 1.20 | Rough | ||
| CNMG160612H K20K | 15.88 | 16.12 | 1.20 | Rough | ||
| CNMG160612H K25P | 15.88 | 16.12 | 1.20 | Rough | ||
| CNMG160612H K35P | 15.88 | 16.12 | 1.20 | Rough | ||
| CNMG160616H K10P | 15.88 | 16.12 | 1.60 | Rough | ||
| CNMG160616H K20K | 15.88 | 16.12 | 1.60 | Rough | ||
| CNMG160616H K25P | 15.88 | 16.12 | 1.60 | Rough |
CNMG-M - 2 products Negative ISO Select Inserts for General purpose machining.
| Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|
| CNMG160612M K10M | 15.88 | 16.12 | 1.20 | Medium | ||
| CNMG160612M K25M | 15.88 | 16.12 | 1.20 | Medium |
CNMG-R - 4 products Negative ISO Select Inserts for Tough grade, interruped cut machining.
| Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|
| CNMG160612R K10M | 15.88 | 16.12 | 1.20 | Rough Positive | ||
| CNMG160612R K25M | 15.88 | 16.12 | 1.20 | Rough Positive | ||
| CNMG160612R K25P | 15.88 | 16.12 | 1.20 | Rough Positive | ||
| CNMG160612R K35P | 15.88 | 16.12 | 1.20 | Rough Positive |
Tick the related products you wish to purchase and add to cart with this ISO Toolholder.
Compare Products
You have no items to compare.
My Cart
You have no items in your shopping cart.
