GBP
EUR
USDDetails
DV50BST16087M
Additional Information
| SKU | 4067830 |
|---|---|
| Manufacturer | Kennametal |
| Tool Group | ST-DV |
| DCB | 17.00 |
| D2 - mm | 29.00 |
| D21 - mm | 34.00 |
| L1 - mm | 87.00 |
| L2 - mm | 10.00 |
| L21 - mm | 62.00 |
| G | M16 |
Related Products
Below are the related products for this DV50.
Dodeka Toolholders
Dodeka Mini 45°, Screw-On End Mills - 6 products
| Product Code | D1 | D1 Max | D | L1 | DPM | G3X | WF | Ap1 max | Z | |
|---|---|---|---|---|---|---|---|---|---|---|
| KSHR025D02M16HN06 | 25.00 | 33.20 | 29.00 | 32.00 | 17.00 | M16 | 22 | 3.20 | 2 | |
| KSHR025D03M16HN06 | 25.00 | 33.20 | 29.00 | 32.00 | 17.00 | M16 | 22 | 3.20 | 3 | |
| KSHR032D03M16HN06 | 32.00 | 40.20 | 29.00 | 40.00 | 17.00 | M16 | 22 | 3.20 | 3 | |
| KSHR032D04M16HN06 | 32.00 | 40.20 | 29.00 | 40.00 | 17.00 | M16 | 22 | 3.20 | 4 | |
| KSHR040D04M16HN06 | 40.00 | 48.20 | 29.00 | 40.00 | 17.00 | M16 | 22 | 3.20 | 4 | |
| KSHR040D05M16HN06 | 40.00 | 48.20 | 29.00 | 40.00 | 17.00 | M16 | 22 | 3.20 | 5 |
Dodeka Mini High-Feed 15°, Screw-On End Mills - 6 products
| Product Code | D1 | D1 Max | D | L1 | DPM | G3X | WF | Ap1 max | Z | |
|---|---|---|---|---|---|---|---|---|---|---|
| KSHRHF025D02M16HN06 | 25.00 | 38.20 | 29.00 | 32.00 | 17.00 | M16 | 22 | 1.60 | 2 | |
| KSHRHF025D03M16HN06 | 25.00 | 38.20 | 29.00 | 32.00 | 17.00 | M16 | 22 | 1.60 | 3 | |
| KSHRHF032D03M16HN06 | 32.00 | 45.20 | 29.00 | 40.00 | 17.00 | M16 | 22 | 1.60 | 3 | |
| KSHRHF032D04M16HN06 | 32.00 | 45.20 | 29.00 | 40.00 | 17.00 | M16 | 22 | 1.60 | 4 | |
| KSHRHF040D04M16HN06 | 40.00 | 53.20 | 29.00 | 40.00 | 17.00 | M16 | 22 | 1.60 | 4 | |
| KSHRHF040D05M16HN06 | 40.00 | 53.20 | 29.00 | 40.00 | 17.00 | M16 | 22 | 1.60 | 5 |
KDMB Die & Mold Toolholders
Screw-On End Mills - 4 products
| Product Code | D1 | D1 Max | D | G3X | WF | L2 | Ap1 max | Z | |
|---|---|---|---|---|---|---|---|---|---|
| KDMB12R026M08SN | 12.00 | 0.00 | 13.00 | M8 | - | 26.00 | 6.00 | 1 | |
| KDMB16R026M08SN | 16.00 | 0.00 | 13.00 | M8 | - | 26.00 | 8.00 | 1 | |
| KDMB20R030M10SN | 20.00 | 0.00 | 18.00 | M10 | - | 30.00 | 10.00 | 1 | |
| KDMB25R040M12SN | 25.00 | 0.00 | 21.00 | M12 | - | 40.00 | 12.50 | 1 |
KDMT Die & Mold Toolholders
Screw-On End Mills - 4 products
| Product Code | D1 | D1 Max | D | G3X | WF | L2 | Ap1 max | Z | |
|---|---|---|---|---|---|---|---|---|---|
| KDMT12R028M08SN | 12.00 | 0.00 | 13.00 | M8 | - | 28.00 | 3.00 | 1 | |
| KDMT16R028M08SN | 16.00 | 0.00 | 13.00 | M8 | - | 28.00 | 4.00 | 1 | |
| KDMT20R032M10SN | 20.00 | 0.00 | 18.00 | M10 | - | 32.00 | 5.00 | 1 | |
| KDMT25R042M12SN | 25.00 | 0.00 | 21.00 | M12 | - | 42.00 | 6.00 | 1 |
KSOM Mini Toolholders
Screw-On End Mills - 2 products
| Product Code | D1 | D1 Max | D | G3X | WF | L2 | Ap1 max | Z | |
|---|---|---|---|---|---|---|---|---|---|
| KSOM32R02M16OF06 | 32.00 | 41.10 | 29.00 | M16 | 22 | 40.00 | 3.50 | 2 | |
| KSOM40R03M16OF06 | 40.00 | 49.00 | 29.00 | M16 | 22 | 40.00 | 3.50 | 3 |
Kenfeed 2X Toolholders
Screw-On End Mills, WOEJ09 - 4 products
| Product Code | D1 Max | D1 | D | WF | G3X | L2 | Ap1 max | Z | |
|---|---|---|---|---|---|---|---|---|---|
| KF2X25Z02M12WO09 | 25.00 | 0.00 | 21.00 | 17 | M12 | 35.00 | 1.50 | 2 | |
| KF2X32Z03M16WO09 | 32.00 | 16.00 | 29.00 | 22 | M16 | 45.00 | 1.50 | 3 | |
| KF2X35Z03M16WO09 | 35.00 | 19.00 | 29.00 | 22 | M16 | 45.00 | 1.50 | 3 | |
| KF2X42Z04M16WO09 | 42.00 | 26.00 | 29.00 | 22 | M16 | 45.00 | 1.50 | 4 |
Kenfeed Mini Toolholders
Screw-On End Mills - 5 products
| Product Code | D1 | D1 Max | D | G3X | WF | L2 | Ap1 max | Z | |
|---|---|---|---|---|---|---|---|---|---|
| 16Y02R025M08SWP03 | 11.00 | 16.00 | 13.00 | M8 | 10 | 25.00 | 0.80 | 2 | |
| 20Y03R030M10SWP03 | 14.00 | 20.00 | 18.00 | M10 | 15 | 30.00 | 0.80 | 3 | |
| 25Y04R035M12SWP03 | 16.00 | 25.00 | 21.00 | M12 | 17 | 35.00 | 1.00 | 4 | |
| 32Y05R043M16SWP03 | 22.00 | 32.00 | 29.00 | M16 | 24 | 43.00 | 1.00 | 5 | |
| 35Y05R043M16SWP03 | 28.00 | 35.00 | 29.00 | M16 | 24 | 43.00 | 1.00 | 5 |
Rodeka Toolholders
Screw-On End Mills - 3 products
| Product Code | D1 | D1 Max | D | G3X | WF | L2 | Ap1 max | Z | |
|---|---|---|---|---|---|---|---|---|---|
| KDR32Z03M16RN12 | 20.00 | 32.00 | 29.00 | M16 | 24 | 40.00 | 3.00 | 3 | |
| KDR35Z03M16RN12 | 23.00 | 35.00 | 29.00 | M16 | 24 | 40.00 | 3.00 | 3 | |
| KDR42Z04M16RN12 | 30.00 | 42.00 | 29.00 | M16 | 24 | 40.00 | 3.00 | 4 |
Shoulder Mill Toolholders
Mill 1-7, End Mill Cylindrical Shank - 1 products
| Product Code | D1 | D | DPM | G3X | L2 | Ap1 max | Z | Max Ramp Angle° | |
|---|---|---|---|---|---|---|---|---|---|
| 12A02R020M08ED07 | 11.87 | 13.00 | 8.50 | M8 | 20.00 | 6.96 | 2 | 5.20 |
Mill 1-10, Screw-On End Mill - 9 products
| Product Code | D1 | D | DPM | G3X | L2 | Ap1 max | Z | Max Ramp Angle° | |
|---|---|---|---|---|---|---|---|---|---|
| 16A02R025M08ED10 | 16.00 | 13.00 | 8.50 | M8 | 25.00 | 10.10 | 2 | 9.50 | |
| 20A02R028M10ED10 | 20.00 | 18.00 | 10.50 | M10 | 28.00 | 10.10 | 2 | 6.00 | |
| 20A03R028M10ED10 | 20.00 | 18.00 | 10.50 | M10 | 28.00 | 10.10 | 3 | 6.00 | |
| 25A03R032M12ED10 | 25.00 | 21.00 | 12.50 | M12 | 32.00 | 10.00 | 3 | 4.00 | |
| 25A04R032M12ED10 | 25.00 | 21.00 | 12.50 | M12 | 32.00 | 10.00 | 4 | 4.00 | |
| 32A04R040M16ED10 | 32.00 | 29.00 | 17.00 | M16 | 40.00 | 10.00 | 4 | 2.80 | |
| 32A05R040M16ED10 | 32.00 | 29.00 | 17.00 | M16 | 40.00 | 10.00 | 5 | 2.80 | |
| 40A06R040M16ED10 | 40.00 | 29.00 | 17.00 | M16 | 40.00 | 9.90 | 6 | 2.00 | |
| 42A06R040M16ED10 | 42.00 | 29.00 | 17.00 | M16 | 40.00 | 9.90 | 6 | 1.80 |
Mill 1-14, Screw-On End Mills - 7 products
| Product Code | D1 | D | DPM | G3X | L2 | Ap1 max | Z | Max Ramp Angle° | |
|---|---|---|---|---|---|---|---|---|---|
| 20A02R035M10SED14 | 20.00 | 18.00 | 10.50 | M10 | 35.00 | 14.70 | 2 | 16.80 | |
| 25A02R035M12SED14 | 25.00 | 21.00 | 12.50 | M12 | 35.00 | 14.60 | 2 | 10.70 | |
| 25A03R035M12SED14 | 25.00 | 21.00 | 12.50 | M12 | 35.00 | 14.60 | 3 | 10.70 | |
| 32A03R040M16SED14 | 32.00 | 29.00 | 17.00 | M16 | 40.00 | 14.60 | 3 | 7.00 | |
| 32A04R040M16SED14 | 32.00 | 29.00 | 17.00 | M16 | 40.00 | 14.60 | 4 | 7.00 | |
| 40A04R040M16SED14 | 40.00 | 29.00 | 17.00 | M16 | 40.00 | 14.40 | 4 | 5.10 | |
| 40A05R040M16SED14 | 40.00 | 29.00 | 17.00 | M16 | 40.00 | 14.40 | 5 | 5.10 |
Mill 1-18, End Mills, Screw-On - 5 products
| Product Code | D1 | D | DPM | G3X | L2 | Ap1 max | Z | Max Ramp Angle° | |
|---|---|---|---|---|---|---|---|---|---|
| 25A02R035M12SED18 | 25.00 | 21.00 | 12.50 | M12 | 35.00 | 18.00 | 2 | 17.00 | |
| 32A02R040M16SED18 | 32.00 | 29.00 | 17.00 | M16 | 40.00 | 18.00 | 2 | 10.50 | |
| 32A03R040M16SED18 | 32.00 | 29.00 | 17.00 | M16 | 40.00 | 18.00 | 3 | 10.50 | |
| 40A03R040M16SED18 | 40.00 | 29.00 | 17.00 | M16 | 40.00 | 17.80 | 3 | 7.50 | |
| 40A04R040M16SED18 | 40.00 | 29.00 | 17.00 | M16 | 40.00 | 17.80 | 4 | 7.50 |
Mill 4-15, Screw-On End Mills - 5 products
| Product Code | D1 | D | DPM | G3X | L2 | Ap1 max | Z | |
|---|---|---|---|---|---|---|---|---|
| M4D025Z02M12LN15 | 25.00 | 21.00 | 12.50 | M12 | 32.00 | 15.50 | 2 | |
| M4D032Z03M16LN15 | 32.00 | 29.00 | 17.00 | M16 | 40.00 | 15.50 | 3 | |
| M4D032Z04M16LN15 | 32.00 | 29.00 | 17.00 | M16 | 40.00 | 15.50 | 4 | |
| M4D035Z04M16LN15 | 35.00 | 29.00 | 17.00 | M16 | 40.00 | 15.50 | 4 | |
| M4D040Z05M16LN15 | 40.00 | 29.00 | 17.00 | M16 | 40.00 | 15.50 | 5 |
Stellram Toolholders
5505VX Modular Head - 4 products
| Product Code | D | L/H | M | D1 | Ap1 max | Number of Teeth | |
|---|---|---|---|---|---|---|---|
| 5505VX16SA016R25 | 16.00 | 25.00 | M8 | 8.50 | 16.00 | 2 | |
| 5505VX20SA020R35 | 20.00 | 35.00 | M10 | 10.50 | 20.00 | 2 | |
| 5505VX25SA025R40 | 25.00 | 40.00 | M12 | 12.50 | 25.00 | 2 | |
| 5505VX32SA032R50 | 32.00 | 50.00 | M16 | 17.00 | 32.00 | 2 |
Extensions
ST Ext-ST - 1 products
| Product Code | DCB | G | DPM | G3X | D | A | L1 | WF | |
|---|---|---|---|---|---|---|---|---|---|
| M16MST16040M | 17 | M16 | 17.00 | M16 | 29.00 | 4.00 | 40.00 | 22 |
ST Red = ST - 5 products
| Product Code | G | DPM | G3X | D | D2 | A | L1 | L2 | L20 | WF | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| M16MST10060M | M10 | 17.00 | M16 | 29.00 | 18.00 | 4.00 | 60.00 | 10.00 | 50.00 | 22 | |
| M16MST12040M | M12 | 17.00 | M16 | 29.00 | 21.00 | 4.00 | 35.00 | 10.00 | 25.00 | 22 | |
| M16MST08060M | M8 | 17.00 | M16 | 29.00 | 13.00 | 4.00 | 60.00 | 10.00 | 50.00 | 22 | |
| M16MST10080M | M10 | 17.00 | M16 | 29.00 | 18.00 | 4.00 | 80.00 | 10.00 | 70.00 | 22 | |
| M16MST08080M | M8 | 17.00 | M16 | 29.00 | 13.00 | 4.00 | 80.00 | 10.00 | 70.00 | 22 |
Tick the related products you wish to purchase and add to cart with this DV50.
Compare Products
You have no items to compare.
My Cart
You have no items in your shopping cart.
