GBP
EUR
USDDetails
40A04R040M16SED18
Additional Information
| SKU | 3349774 |
|---|---|
| Manufacturer | Kennametal |
| Tool Group | Mill 1-18, End Mills, Screw-On |
| Mill Type | Screw-On End Mill |
| D1 - mm | 40.00 |
| D - mm | 29.00 |
| DPM - mm | 17.00 |
| G3X | M16 |
| L2 - mm | 40.00 |
| WF - mm | 22.00 |
| Ap1 max | 17.80 |
| Z - mm | 4.00 |
| Max Ramp Angle° | 7.50 |
| KG | 0.20 |
| Max RPM | 28,220.00 |
| Gauge Insert | EP18 |
| Platform | Mill 1-18 |
Related Products
Below are the related products for this Shoulder Mill Toolholder.
Shoulder Mill Inserts
Mill 1-18, EC-FLDJ - 10 products Insert for Light Machining
| Product Code | LI | W | S | Rε | HM | Cutting Edges | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| EDCT180504PDFRLDJ KC410M | 21.75 | 10.98 | 5.50 | 0.40 | 0.02 | 2 | ||
| EDCT180508PDFRLDJ KC410M | 21.76 | 10.97 | 5.50 | 0.80 | 0.02 | 2 | ||
| EDCT180508PDFLLDJ KC410M | 21.76 | 10.97 | 5.50 | 0.80 | 0.02 | 2 | ||
| EDCT180512PDFRLDJ KC410M | 21.77 | 10.97 | 5.50 | 1.20 | 0.02 | 2 | ||
| EDCT180516PDFRLDJ KC410M | 21.78 | 10.96 | 5.50 | 1.60 | 0.02 | 2 | ||
| EDCT180520PDFRLDJ KC410M | 21.79 | 10.95 | 5.50 | 2.00 | 0.02 | 2 | ||
| EDCT180524PDFRLDJ KC410M | 21.79 | 10.93 | 5.50 | 2.40 | 0.02 | 2 | ||
| EDCT180532PDFRLDJ KC410M | 21.79 | 10.91 | 5.50 | 3.20 | 0.02 | 2 | ||
| EDCT180540PDFRLDJ KC410M | 20.78 | 10.87 | 5.50 | 4.00 | 0.02 | 2 | ||
| EDCT180548PDFRLDJ KC410M | 20.20 | 10.83 | 5.50 | 4.80 | 0.02 | 2 |
Mill 1-18, EC-ELDJ - 8 products Insert for Medium /Heavy Machining
| Product Code | LI | W | S | Rε | HM | Cutting Edges | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| EDCT180508PDERLDJ KC422M | 21.76 | 10.97 | 5.50 | 0.80 | 0.03 | 2 | ||
| EDCT180512PDERLDJ KC422M | 21.77 | 10.97 | 5.50 | 1.20 | 0.03 | 2 | ||
| EDCT180516PDERLDJ KC422M | 21.78 | 10.96 | 5.50 | 1.60 | 0.03 | 2 | ||
| EDCT180524PDERLDJ KC422M | 21.79 | 10.93 | 5.50 | 2.40 | 0.03 | 2 | ||
| EDCT180532PDERLDJ KC422M | 21.79 | 10.91 | 5.50 | 3.20 | 0.03 | 2 | ||
| EDCT180540PDERLDJ KC422M | 20.78 | 10.87 | 5.50 | 4.00 | 0.03 | 2 | ||
| EDCT180548PDERLDJ KC422M | 20.20 | 10.83 | 5.50 | 4.80 | 0.03 | 2 | ||
| EDCT180564PDERLDJ KC422M | 18.72 | 10.73 | 5.50 | 6.40 | 0.03 | 2 |
Mill 1-18, EC-LD - 6 products Insert for Light Machining
| Product Code | LI | W | S | Rε | HM | Cutting Edges | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| EDCT180508PDERLD KC522M | 21.76 | 10.97 | 5.50 | 0.80 | 0.05 | 2 | ||
| EDCT180516PDERLD KC522M | 21.78 | 10.96 | 5.50 | 1.60 | 0.05 | 2 | ||
| EDCT180532PDERLD KC522M | 21.79 | 10.91 | 5.50 | 3.20 | 0.05 | 2 | ||
| EDCT180540PDERLD KC522M | 20.78 | 10.87 | 5.50 | 4.00 | 0.05 | 2 | ||
| EDCT180548PDERLD KC522M | 20.20 | 10.83 | 5.50 | 4.80 | 0.05 | 2 | ||
| EDCT180564PDERLD KC522M | 18.72 | 10.73 | 5.50 | 6.40 | 0.05 | 2 |
Mill 1-18, EP-EGD - 23 products Insert for Medium Machining
| Product Code | LI | W | S | Rε | HM | Cutting Edges | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| EDPT180508PDERGD KC520M | 21.76 | 10.97 | 5.50 | 0.80 | 0.09 | 2 | ||
| EDPT180508PDERGD KC525M | 21.76 | 10.97 | 5.50 | 0.80 | 0.09 | 2 | ||
| EDPT180508PDERGD KC725M | 21.76 | 10.97 | 5.50 | 0.80 | 0.09 | 2 | ||
| EDPT180508PDERGD KCPK30 | 21.76 | 10.97 | 5.50 | 0.80 | 0.09 | 2 | ||
| EDPT180512PDERGD KC725M | 21.77 | 11.00 | 5.50 | 1.20 | 0.09 | 2 | ||
| EDPT180516PDERGD KC520M | 21.78 | 10.94 | 5.50 | 1.60 | 0.09 | 2 | ||
| EDPT180516PDERGD KC522M | 21.78 | 10.94 | 5.50 | 1.60 | 0.09 | 2 | ||
| EDPT180516PDERGD KC525M | 21.78 | 10.94 | 5.50 | 1.60 | 0.09 | 2 | ||
| EDPT180516PDERGD KC725M | 21.78 | 10.94 | 5.50 | 1.60 | 0.09 | 2 | ||
| EDPT180516PDERGD KCPK30 | 21.78 | 10.94 | 5.50 | 1.60 | 0.09 | 2 | ||
| EDPT180524PDERGD KC725M | 21.79 | 10.93 | 5.50 | 2.40 | 0.09 | 2 | ||
| EDPT180532PDERGD KC520M | 21.79 | 10.91 | 5.50 | 3.20 | 0.09 | 2 | ||
| EDPT180532PDERGD KC522M | 21.79 | 10.91 | 5.50 | 3.20 | 0.09 | 2 | ||
| EDPT180532PDERGD KC525M | 21.79 | 10.91 | 5.50 | 3.20 | 0.09 | 2 | ||
| EDPT180532PDERGD KC725M | 21.79 | 10.91 | 5.50 | 3.20 | 0.09 | 2 | ||
| EDPT180532PDERGD KCPK30 | 21.79 | 10.91 | 5.50 | 3.20 | 0.09 | 2 | ||
| EDPT180548PDERGD KC522M | 20.20 | 10.83 | 5.50 | 4.80 | 0.09 | 2 | ||
| EDPT180548PDERGD KC525M | 20.20 | 10.83 | 5.50 | 4.80 | 0.09 | 2 | ||
| EDPT180548PDERGD KC725M | 20.20 | 10.83 | 5.50 | 4.80 | 0.09 | 2 | ||
| EDPT180564PDERGD KC522M | 18.79 | 10.73 | 5.50 | 6.40 | 0.09 | 2 | ||
| EDPT180564PDERGD KC525M | 18.79 | 10.73 | 5.50 | 6.40 | 0.09 | 2 | ||
| EDPT180564PDERGD KC725M | 18.79 | 10.73 | 5.50 | 6.40 | 0.09 | 2 | ||
| EDPT180564PDERGD KCPK30 | 18.79 | 10.73 | 5.50 | 6.40 | 0.09 | 2 |
Mill 1-18, EP-SGE - 12 products Insert for Heavy Machining
| Product Code | LI | W | S | BS | Rε | HM | Cutting Edges | Material Machining | |
|---|---|---|---|---|---|---|---|---|---|
| EDPT180508PDSRGE KC522M | 21.73 | 10.70 | 5.45 | 2.42 | 0.80 | 0.14 | 2 | ||
| EDPT180508PDSRGE KC725M | 21.73 | 10.70 | 5.45 | 2.42 | 0.80 | 0.14 | 2 | ||
| EDPT180508PDSRGE KCPK30 | 21.73 | 10.70 | 5.45 | 2.42 | 0.80 | 0.14 | 2 | ||
| EDPT180512PDSRGE KC522M | 21.77 | 10.68 | 5.45 | 2.00 | 1.20 | 0.14 | 2 | ||
| EDPT180512PDSRGE KC725M | 21.77 | 10.68 | 5.45 | 2.00 | 1.20 | 0.14 | 2 | ||
| EDPT180512PDSRGE KCPK30 | 21.77 | 10.68 | 5.45 | 2.00 | 1.20 | 0.14 | 2 | ||
| EDPT180516PDSRGE KC522M | 21.74 | 10.66 | 5.45 | 1.59 | 1.60 | 0.14 | 2 | ||
| EDPT180516PDSRGE KC725M | 21.74 | 10.66 | 5.45 | 1.59 | 1.60 | 0.14 | 2 | ||
| EDPT180516PDSRGE KCPK30 | 21.74 | 10.66 | 5.45 | 1.59 | 1.60 | 0.14 | 2 | ||
| EDPT180532PDSRGE KC522M | 21.75 | 10.62 | 5.45 | 0.07 | 3.20 | 0.14 | 2 | ||
| EDPT180532PDSRGE KC725M | 21.75 | 10.62 | 5.45 | 0.07 | 3.20 | 0.14 | 2 | ||
| EDPT180532PDSRGE KCPK30 | 21.75 | 10.62 | 5.45 | 0.07 | 3.20 | 0.14 | 2 |
BT40 - Kennametal BT40 Screw On Modular Holders
ST-BT Form B/AD - 5 products BT40 Screw-on Adaptors
| Product Code | D2 | L1 | L2 | G | |
|---|---|---|---|---|---|
| BT40BST16067M | 29.00 | 67.00 | 34.00 | M16 | |
| BT40BST16087M | 29.00 | 87.00 | 10.00 | M16 | |
| BT40BST16107M | 29.00 | 107.00 | 10.00 | M16 | |
| BT40BST16127M | 29.00 | 127.00 | 10.00 | M16 | |
| BT40BST16047M | 29.00 | 47.00 | 14.00 | M16 |
BT50 - Kennametal BT50 Screw On Modular Holders
ST-BT - 4 products
| Product Code | D2 | D21 | L1 | L2 | L21 | G | |
|---|---|---|---|---|---|---|---|
| BT50BST16087M | 21.00 | 34.00 | 0.00 | 10.00 | 0.00 | M16 | |
| BT50BST16137M | 29.00 | 39.00 | 137.00 | 10.00 | 0.00 | M16 | |
| BT50BST16187M | 29.00 | 39.00 | 187.00 | 10.00 | 143.00 | M16 | |
| BT50BST16237M | 29.00 | 49.00 | 237.00 | 10.00 | 193.00 | M16 |
DV40 - Kennametal Erickson DV40 Screw On Modular Holders
ST-DV - 5 products
| Product Code | D2 | D21 | L2 | L21 | G | |
|---|---|---|---|---|---|---|
| DV40BST16038M | 29.00 | 0.00 | 13.00 | 0.00 | M16 | |
| DV40BST16058M | 29.00 | 0.00 | 33.00 | 0.00 | M16 | |
| DV40BST16078M | 29.00 | 34.00 | 10.00 | 53.00 | M16 | |
| DV40BST16098M | 29.00 | 34.00 | 10.00 | 73.00 | M16 | |
| DV40BST16118M | 29.00 | 39.00 | 10.00 | 93.00 | M16 |
DV50 - Kennametal Erickson DV50 Screw On Modular Holders
ST-DV - 4 products
| Product Code | D2 | D21 | L2 | L21 | G | |
|---|---|---|---|---|---|---|
| DV50BST16087M | 29.00 | 34.00 | 10.00 | 62.00 | M16 | |
| DV50BST16137M | 29.00 | 39.00 | 10.00 | 112.00 | M16 | |
| DV50BST16187M | 29.00 | 39.00 | 10.00 | 162.00 | M16 | |
| DV50BST16237M | 29.00 | 49.00 | 10.00 | 212.00 | M16 |
Extensions
ST Ext-ST - 1 products
| Product Code | DCB | G | DPM | G3X | D | A | L1 | WF | |
|---|---|---|---|---|---|---|---|---|---|
| M16MST16040M | 17 | M16 | 17.00 | M16 | 29.00 | 4.00 | 40.00 | 22 |
HSK63 - Kennametal Erickson HSK63A Screw On Modular Holders
ST - 4 products ST-HSK Form A
| Product Code | D2 | D21 | L1 | L2 | G | |
|---|---|---|---|---|---|---|
| HSK63AST16059M | 29.00 | 34.00 | 59.00 | 10.00 | M16 | |
| HSK63AST16084M | 29.00 | 34.00 | 84.00 | 10.00 | M16 | |
| HSK63AST16109M | 29.00 | 34.00 | 109.00 | 10.00 | M16 | |
| HSK63AST16134M | 29.00 | 39.00 | 134.00 | 10.00 | M16 |
Tick the related products you wish to purchase and add to cart with this Shoulder Mill Toolholder.
Note: Some of the related holders may only fit with the use of the related Extension. Please check the 'G' value to 'G3X' (or 'M') value are compatible.
Compare Products
You have no items to compare.
My Cart
You have no items in your shopping cart.
