GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

Kennametal DFR Indexable Drill Inserts

Drill Fix™ DFR™

Drill Fix DFR offers maximum feed rates at diameter range 12,5–24mm at 2 x D, 3 x D, and 4 x D applications. Using rectangular-shaped inboard and outboard inserts enables soft starting cuts and short chips as well as enabling higher feed rates than small-size symmetrical-trigon or square inserts. Drill Fix DFR's low cutting forces provide long tool body life and highest stability at smallest sizes.

Furthermore, these inserts enable soft starting cuts and short chips. The low cutting forces of a Drill Fix DFR provide long tool body life and highest stability at smallest sizes.

Features and Benefits

Productivity and Profitability

  • Achieve highest feed rates with rectangular-shaped inserts
    that offer a soft starting cut and highest stability.
  • Use X-offset on turning machines to adjust the drill diameter,
    eliminating the need for specials in many applications and on
    machining centres, to reach tolerance optimisation.
  • Same insert size is used in each pocket, reducing inventory costs.

Versatility

  • Diameter range covering 12,5–24mm.
  • 2 x D, 3 x D, and 4 x D L/D ratios as standard.
  • Various shanks as standard available: WD, SSF, and new KM-TS™.
  • Multiple insert grades and geometries available.
  • Use where feed rates are the limiting factor.
  • Apply at straight holes, inclined entries and exits, interrupted cuts, and rough or welded entry surfaces.
  • Eccentric chuck available as standard.

Reliability

  • Highest stability at smaller sizes due to rectangular-shaped insert.
  • Same insert can be used as inboard or outboard insert.
    No risk of mixing up inner and outer insert.
  • Low cutting forces resulting in long body tool life.

Customisation

  • Intermediate diameters available as semi-standards.
  • Engineered solutions available.
  • Multistep drills available upon request.
  • Left-hand version available.

Click through to the products to find their related matching tools.

12 Item(s)

per page

Set Descending Direction
  1. DFR-GD

    Outboard insert for machining Steel/Cast Iron

    Product Code D1 S  
    DFR020204GD KCPK10 » 2.30 2.79 0.40
    DFR020204GD KCU40 » 2.30 2.79 0.40
    DFR030204GD KCPK10 » 2.50 2.88 0.40
    DFR030204GD KCU40 » 2.50 2.88 0.40
    DFR040304GD KCPK10 » 2.85 3.79 0.40
    DFR040304GD KCU40 » 2.85 3.79 0.40
    DFR-GD
  2. DFR-LD

    Inboard/Outboard insert for machining Steel/Cast Iron/HRSA/Aluminium

    Product Code D1 S  
    DFR020204LD KCU40 » 2.30 2.79 0.40
    DFR030204LD KCU40 » 2.50 2.86 0.40
    DFR040304LD KCU40 » 2.85 3.76 0.40
    DFR-LD
  3. DFR-MD

    Inboard/Outboard insert for machining Stainless Steel

    Product Code D1 S  
    DFR020204MD KCU40 » 2.30 2.79 0.40
    DFR030204MD KCU40 » 2.50 2.88 0.40
    DFR040304MD KCU40 » 2.85 3.79 0.40
    DFR-MD

12 Item(s)

per page

Set Descending Direction

Quote Form

If you would like a quote please complete this form by navigating the site adding the products you're interested in along with your contact information.

* Required Fields

Please wait...