GBP
EUR
USD- Home /
- A25RDTFNR16KC04
Details
A25RDTFNR16KC04
Additional Information
| SKU | 2441866 |
|---|---|
| Manufacturer | Kennametal |
| Tool Group | A-DTFN-KC 90 DEGREE |
| Clamping Style | Kenclamp |
| Holder Style | A-DTFN |
| D - mm | 25.00 |
| D min - mm | 32.00 |
| F - mm | 17.00 |
| L1 - mm | 200.00 |
| Gauge Insert | TN..160408 |
| Insert Type | Negative |
| Torx Plus | 15 IP |
| CS | 1/4-18 NPT |
| Angle F | -14.00 |
| Clamp Asssembly | CM234R ASSY |
| Slotted Pin | SSP025016M |
| Hand of Tool | R |
Related Products
Below are the related products for this ISO Boring Bar.
CBN Inserts
TNGA - 9 products Negative CBN Insert for Light/Medium/Heavy Machining
| Product Code | D | L10 | Rε | |
|---|---|---|---|---|
| TNGA160404S01015MT KBH20 | 9.52 | 16.50 | 0.40 | |
| TNGA160408S01015MT KBH20 | 9.52 | 16.50 | 0.80 | |
| TNGA160412S01015MT KBH20 | 9.52 | 16.50 | 1.20 | |
| TNGA160404S01225MT KBH20 | 9.52 | 16.50 | 0.40 | |
| TNGA160408S01225MT KBH20 | 9.52 | 16.50 | 0.80 | |
| TNGA160412S01225MT KBH20 | 9.52 | 16.50 | 1.20 | |
| TNGA160404S01735MT KBH20 | 9.52 | 16.50 | 0.40 | |
| TNGA160408S01735MT KBH20 | 9.52 | 16.50 | 0.80 | |
| TNGA160412S01735MT KBH20 | 9.52 | 16.50 | 1.20 |
TNGM - 3 products Negative CBN Insert with Chip Breaker
| Product Code | D | L10 | Rε | |
|---|---|---|---|---|
| TNGM160404S01325MTCB1 KBH20 | 9.52 | 16.50 | 0.40 | |
| TNGM160408S01325MTCB1 KBH20 | 9.52 | 16.50 | 0.80 | |
| TNGA160412S01325MTCB1 KBH20 | 9.52 | 16.50 | 1.20 |
ISO Inserts
TNGG-FS - 5 products Negative ISO insert for Finishing machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| TNGG160402FS KCU25 | 9.53 | 16.50 | 0.20 | 4.76 | 3.81 | Finishing | ||
| TNGG160404FS KCU10 | 9.53 | 16.50 | 0.40 | 0.00 | 0.00 | Finishing | ||
| TNGG160404FS KCU25 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Finishing | ||
| TNGG160408FS KC5525 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Finishing | ||
| TNGG160408FS KCU25 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Finishing |
TNGP - 5 products Negative ISO insert for Finishing machining.
| Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|
| TNGP160402 KC5410 | 9.53 | 16.50 | 0.20 | Finishing | ||
| TNGP160404 KC5410 | 9.53 | 16.50 | 0.40 | Finishing | ||
| TNGP160404 KCU10 | 9.53 | 16.50 | 0.40 | Finishing | ||
| TNGP160408 KC5410 | 9.53 | 16.50 | 0.80 | Finishing | ||
| TNGP160408 KCU10 | 9.53 | 16.50 | 0.80 | Finishing |
TNMA - 11 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| TNMA160408 K68 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Medium | ||
| TNMA160408 KCK05 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Medium | ||
| TNMA160408 KCK15 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Medium | ||
| TNMA160408 KCK20 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Medium | ||
| TNMA160412 KCK05 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Medium | ||
| TNMA160412 KCK15 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Medium | ||
| TNMA160412 KCK20 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Medium | ||
| TNMA160416 KCK15 | 9.53 | 16.50 | 1.60 | 4.76 | 3.81 | Medium | ||
| TNMA160416 KCK20 | 9.53 | 16.50 | 1.60 | 4.76 | 3.81 | Medium | ||
| TNMA160408 KCK15B | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Medium | ||
| TNMA160412 KCK15B | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Medium |
TNMG-FF - 11 products Negative ISO insert for Finishing machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| TNMG160404FF KT315 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Finishing | ||
| TNMG160408FF KT315 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Finishing | ||
| TNMG160404FF KC5010 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Finishing | ||
| TNMG160404FF KCP05 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Finishing | ||
| TNMG160404FF KCP10 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Finishing | ||
| TNMG160404FF KCU10 | 9.53 | 16.50 | 0.40 | 0.00 | 0.00 | Finishing | ||
| TNMG160408FF KC5010 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Finishing | ||
| TNMG160408FF KCP05 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Finishing | ||
| TNMG160408FF KCP10 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Finishing | ||
| TNMG160408FF KCU10 | 9.53 | 16.50 | 0.80 | 0.00 | 0.00 | Finishing | ||
| TNMG160408FF KCP10B | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Finishing |
TNMG-FN - 21 products Negative ISO insert for Finishing machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| TNMG160404FN KT315 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Finishing | ||
| TNMG160408FN KT315 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Finishing | ||
| TNMG160412FN KT315 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Finishing | ||
| TNMG160404FN KCK05 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Finishing | ||
| TNMG160404FN KCP05 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Finishing | ||
| TNMG160404FN KCP10 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Finishing | ||
| TNMG160404FN KCP25 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Finishing | ||
| TNMG160408FN KCK05 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Finishing | ||
| TNMG160408FN KCP05 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Finishing | ||
| TNMG160408FN KCP10 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Finishing | ||
| TNMG160408FN KCP25 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Finishing | ||
| TNMG160412FN KCK05 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Finishing | ||
| TNMG160412FN KCP05 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Finishing | ||
| TNMG160412FN KCP10 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Finishing | ||
| TNMG160412FN KCP25 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Finishing | ||
| TNMG160404FN KCP10B | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Finishing | ||
| TNMG160404FN KCP25B | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Finishing | ||
| TNMG160408FN KCP10B | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Finishing | ||
| TNMG160408FN KCP25B | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Finishing | ||
| TNMG160412FN KCP10B | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Finishing | ||
| TNMG160412FN KCP25B | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Finishing |
TNMG-MN - 19 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| TNMG160412MN KCP40 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Medium | ||
| TNMG160404MN KCP05 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Medium | ||
| TNMG160404MN KCP10 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Medium | ||
| TNMG160404MN KCP25 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Medium | ||
| TNMG160404MN KCP30 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Medium | ||
| TNMG160408MN KCP05 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Medium | ||
| TNMG160408MN KCP10 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Medium | ||
| TNMG160408MN KCP25 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Medium | ||
| TNMG160408MN KCP30 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Medium | ||
| TNMG160412MN KCP05 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Medium | ||
| TNMG160412MN KCP10 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Medium | ||
| TNMG160412MN KCP25 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Medium | ||
| TNMG160412MN KCP30 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Medium | ||
| TNMG160404MN KCP10B | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Medium | ||
| TNMG160404MN KCP25B | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Medium | ||
| TNMG160408MN KCP10B | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Medium | ||
| TNMG160408MN KCP25B | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Medium | ||
| TNMG160412MN KCP10B | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Medium | ||
| TNMG160412MN KCP25B | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Medium |
TNMP - 5 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| TNMP160404 K68 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Medium | ||
| TNMP160408 K68 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Medium | ||
| TNMP160416 K68 | 9.53 | 16.50 | 1.60 | 4.76 | 3.81 | Medium | ||
| TNMP160404 K313 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Medium | ||
| TNMP160408 K313 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Medium |
TNMG-FP - 9 products Negative ISO insert for Finishing machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| TNMG160404FP KC5010 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Finishing | ||
| TNMG160404FP KCM15 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Finishing | ||
| TNMG160404FP KCP10 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Finishing | ||
| TNMG160404FP KT315 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Finishing | ||
| TNMG160408FP KC5010 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Finishing | ||
| TNMG160408FP KCM15 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Finishing | ||
| TNMG160408FP KCP10 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Finishing | ||
| TNMG160408FP KT315 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Finishing | ||
| TNMG160412FP KCM15 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Finishing |
TNMG-FW - 17 products Negative ISO insert for Wiper Finishing machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| TNMG160404FW KC5010 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Wiper Finishing | ||
| TNMG160404FW KCP05 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Wiper Finishing | ||
| TNMG160404FW KCP10 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Wiper Finishing | ||
| TNMG160404FW KCU10 | 9.53 | 16.50 | 0.40 | 0.00 | 0.00 | Wiper Finishing | ||
| TNMG160404FW KT315 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Wiper Finishing | ||
| TNMG160408FW KC5010 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Wiper Finishing | ||
| TNMG160408FW KCP05 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Wiper Finishing | ||
| TNMG160408FW KCP10 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Wiper Finishing | ||
| TNMG160408FW KCU10 | 9.53 | 16.50 | 0.80 | 0.00 | 0.00 | Wiper Finishing | ||
| TNMG160408FW KT315 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Wiper Finishing | ||
| TNMG160412FW KC5010 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Wiper Finishing | ||
| TNMG160412FW KCP05 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Wiper Finishing | ||
| TNMG160412FW KCP10 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Wiper Finishing | ||
| TNMG160412FW KCU10 | 9.53 | 16.50 | 1.20 | 0.00 | 0.00 | Wiper Finishing | ||
| TNMG160412FW KT315 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Wiper Finishing | ||
| TNMG160408FW KCP10B | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Wiper Finishing | ||
| TNMG160412FW KCP10B | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Wiper Finishing |
TNMG-MP - 13 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|
| TNMG160404MP KCM15 | 9.53 | 16.50 | 0.40 | Medium | ||
| TNMG160404MP KCM25 | 9.53 | 16.50 | 0.40 | Medium | ||
| TNMG160404MP KCM35 | 9.53 | 16.50 | 0.40 | Medium | ||
| TNMG160404MP KCU10 | 9.53 | 16.50 | 0.40 | Medium | ||
| TNMG160408MP KCM15 | 9.53 | 16.50 | 0.80 | Medium | ||
| TNMG160408MP KCM25 | 9.53 | 16.50 | 0.80 | Medium | ||
| TNMG160408MP KCM35 | 9.53 | 16.50 | 0.80 | Medium | ||
| TNMG160408MP KCP10 | 9.53 | 16.50 | 0.80 | Medium | ||
| TNMG160408MP KCP25 | 9.53 | 16.50 | 0.80 | Medium | ||
| TNMG160408MP KCU10 | 9.53 | 16.50 | 0.80 | Medium | ||
| TNMG160412MP KCM15 | 9.53 | 16.50 | 1.20 | Medium | ||
| TNMG160412MP KCM25 | 9.53 | 16.50 | 1.20 | Medium | ||
| TNMG160412MP KCU10 | 9.53 | 16.50 | 1.20 | Medium |
TNMG-MS - 8 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| TNMG160402MS KCU10 | 9.53 | 16.50 | 0.20 | 0.00 | 0.00 | Medium | ||
| TNMG160402MS KCU25 | 9.53 | 16.50 | 0.20 | 4.76 | 3.81 | Medium | ||
| TNMG160404MS K313 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Medium | ||
| TNMG160404MS KC5510 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Medium | ||
| TNMG160404MS KCU10 | 9.53 | 16.50 | 0.40 | 0.00 | 0.00 | Medium | ||
| TNMG160404MS KCU25 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Medium | ||
| TNMG160408MS KCU10 | 9.53 | 16.50 | 0.80 | 0.00 | 0.00 | Medium | ||
| TNMG160408MS KCU25 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Medium |
TNMG-MW - 8 products Negative ISO insert for Wiper Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| TNMG160408MW KCP05 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Wiper Medium | ||
| TNMG160408MW KCP10 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Wiper Medium | ||
| TNMG160408MW KCP25 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Wiper Medium | ||
| TNMG160412MW KCP05 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Wiper Medium | ||
| TNMG160412MW KCP10 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Wiper Medium | ||
| TNMG160412MW KCP25 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Wiper Medium | ||
| TNMG160408MW KCP25B | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Wiper Medium | ||
| TNMG160412MW KCP10B | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Wiper Medium |
TNMG-RN - 10 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| TNMG160408RN KCP10 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160408RN KCP25 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160408RN KCP30 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160412RN KCP10 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough | ||
| TNMG160412RN KCP25 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough | ||
| TNMG160412RN KCP30 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough | ||
| TNMG160408RN KCP10B | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160408RN KCP25B | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160412RN KCP10B | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough | ||
| TNMG160412RN KCP25B | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough |
TNMG-RP - 27 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| TNMG160408RP KC5510 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160408RP KCK05 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160408RP KCK15 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160408RP KCK20 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160408RP KCM15 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160408RP KCM25 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160408RP KCP05 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160408RP KCP10 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160408RP KCP25 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160408RP KCP30 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160408RP KCU10 | 9.53 | 16.50 | 0.80 | 0.00 | 0.00 | Rough | ||
| TNMG160408RP KCU25 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160412RP KCK20 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough | ||
| TNMG160412RP KCM25 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough | ||
| TNMG160412RP KCM35 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough | ||
| TNMG160412RP KCP05 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough | ||
| TNMG160412RP KCP10 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough | ||
| TNMG160412RP KCP25 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough | ||
| TNMG160412RP KCU25 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough | ||
| TNMG160416RP KCK20 | 9.53 | 16.50 | 1.60 | 4.76 | 3.81 | Rough | ||
| TNMG160416RP KCM25 | 9.53 | 16.50 | 1.60 | 4.76 | 3.81 | Rough | ||
| TNMG160416RP KCP10 | 9.53 | 16.50 | 1.60 | 4.76 | 3.81 | Rough | ||
| TNMG160408RP KCK15B | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160408RP KCP10B | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160408RP KCP25B | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160412RP KCP10B | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough | ||
| TNMG160412RP KCP25B | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough |
TNMG-UN - 11 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| TNMG160408UN KCK05 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160408UN KCK15 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160408UN KCK20 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160412UN KCK05 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough | ||
| TNMG160412UN KCK15 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough | ||
| TNMG160412UN KCK20 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough | ||
| TNMG160416UN KCK05 | 9.53 | 16.50 | 1.60 | 4.76 | 3.81 | Rough | ||
| TNMG160416UN KCK15 | 9.53 | 16.50 | 1.60 | 4.76 | 3.81 | Rough | ||
| TNMG160416UN KCK20 | 9.53 | 16.50 | 1.60 | 4.76 | 3.81 | Rough | ||
| TNMG160408UN KCK15B | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160412UN KCK15B | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough |
TNMG-UP - 6 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| TNMG160404UP KCM15 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Rough | ||
| TNMG160404UP KCM25 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Rough | ||
| TNMG160408UP KCM15 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160408UP KCM25 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough | ||
| TNMG160412UP KCM15 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough | ||
| TNMG160412UP KCM25 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough |
TNMM-RM - 5 products Negative ISO insert for Rough Single Sided machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| TNMM160408RM KCP10 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough Single Sided | ||
| TNMM160408RM KCP25 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough Single Sided | ||
| TNMM160408RM KCP30 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough Single Sided | ||
| TNMM160412RM KCP25 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough Single Sided | ||
| TNMM160408RM KCP25B | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough Single Sided |
TNMM-RP - 3 products Negative ISO insert for Rough Single Sided machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| TNMM160408RP KCP10 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough Single Sided | ||
| TNMM160408RP KCP25 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Rough Single Sided | ||
| TNMM160412RP KCP10 | 9.53 | 16.50 | 1.20 | 4.76 | 3.81 | Rough Single Sided |
TNMS - 2 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| TNMS160404 KC5410 | 9.53 | 16.50 | 0.40 | 4.76 | 3.81 | Medium | ||
| TNMS160408 KC5410 | 9.53 | 16.50 | 0.80 | 4.76 | 3.81 | Medium |
ISO Select Inserts
TNGP - 5 products Negative ISO Select Inserts for Wear resistant machining.
| Product Code | D | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|
| TNGP160402 K10U | 9.53 | 16.50 | 0.20 | Fine Finishing | ||
| TNGP160402 K15U | 9.53 | 16.50 | 0.20 | Fine Finishing | ||
| TNGP160404 K10U | 9.53 | 16.50 | 0.40 | Finishing | ||
| TNGP160404 K15U | 9.53 | 16.50 | 0.40 | Finishing | ||
| TNGP160408 K10U | 9.53 | 16.50 | 0.80 | Finishing |
TNMA - 2 products Negative ISO Select Inserts for General Purpose machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| TNMA160408 K20K | 0.00 | 16.50 | 0.80 | 0.00 | 0.00 | Rough | ||
| TNMA160412 K20K | 0.00 | 16.50 | 1.20 | 0.00 | 0.00 | Rough |
TNMG-F - 19 products Negative ISO Select Inserts for General purpose machining.
| Product Code | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|
| TNMG160404F K10M | 16.50 | 0.40 | Finishing | ||
| TNMG160404F K10P | 16.50 | 0.40 | Finishing | ||
| TNMG160404F K10U | 16.50 | 0.40 | Finishing | ||
| TNMG160404F K15U | 16.50 | 0.40 | Finishing | ||
| TNMG160404F K20K | 16.50 | 0.40 | Finishing | ||
| TNMG160404F K25M | 16.50 | 0.40 | Finishing | ||
| TNMG160404F K25P | 16.50 | 0.40 | Finishing | ||
| TNMG160408F K10M | 16.50 | 0.80 | Finishing | ||
| TNMG160408F K10P | 16.50 | 0.80 | Finishing | ||
| TNMG160408F K10U | 16.50 | 0.80 | Finishing | ||
| TNMG160408F K15U | 16.50 | 0.80 | Finishing | ||
| TNMG160408F K20K | 16.50 | 0.80 | Finishing | ||
| TNMG160408F K25P | 16.50 | 0.80 | Finishing | ||
| TNMG160412F K10M | 16.50 | 1.20 | Finishing | ||
| TNMG160412F K10P | 16.50 | 1.20 | Finishing | ||
| TNMG160412F K10U | 16.50 | 1.20 | Finishing | ||
| TNMG160412F K20K | 16.50 | 1.20 | Finishing | ||
| TNMG160412F K25M | 16.50 | 1.20 | Finishing | ||
| TNMG160412F K25P | 16.50 | 1.20 | Finishing |
TNMG-H - 9 products Negative ISO Select Inserts for Tough grade, interruped cut machining.
| Product Code | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|
| TNMG160404H K25P | 16.50 | 0.40 | Rough | ||
| TNMG160408H K10P | 16.50 | 0.80 | Rough | ||
| TNMG160408H K20K | 16.50 | 0.80 | Rough | ||
| TNMG160408H K25P | 16.50 | 0.80 | Rough | ||
| TNMG160408H K35P | 16.50 | 0.80 | Rough | ||
| TNMG160412H K10P | 16.50 | 1.20 | Rough | ||
| TNMG160412H K20K | 16.50 | 1.20 | Rough | ||
| TNMG160412H K25P | 16.50 | 1.20 | Rough | ||
| TNMG160412H K35P | 16.50 | 1.20 | Rough |
TNMG-M - 6 products Negative ISO Select Inserts for General purpose machining.
| Product Code | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|
| TNMG160404M K10M | 16.50 | 0.40 | Medium | ||
| TNMG160404M K25M | 16.50 | 0.40 | Medium | ||
| TNMG160408M K10M | 16.50 | 0.80 | Medium | ||
| TNMG160408M K25M | 16.50 | 0.80 | Medium | ||
| TNMG160412M K10M | 16.50 | 1.20 | Medium | ||
| TNMG160412M K25M | 16.50 | 1.20 | Medium |
TNMG-R - 13 products Negative ISO Select Inserts for General purpose machining.
| Product Code | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|
| TNMG160404R K10M | 16.50 | 0.40 | Rough | ||
| TNMG160404R K10P | 16.50 | 0.40 | Rough | ||
| TNMG160404R K25M | 16.50 | 0.40 | Rough | ||
| TNMG160404R K25P | 16.50 | 0.40 | Rough | ||
| TNMG160408R K10M | 16.50 | 0.80 | Rough | ||
| TNMG160408R K10P | 16.50 | 0.80 | Rough | ||
| TNMG160408R K25M | 16.50 | 0.80 | Rough | ||
| TNMG160408R K25P | 16.50 | 0.80 | Rough | ||
| TNMG160408R K35P | 16.50 | 0.80 | Rough | ||
| TNMG160412R K10M | 16.50 | 1.20 | Rough | ||
| TNMG160412R K10P | 16.50 | 1.20 | Rough | ||
| TNMG160412R K25M | 16.50 | 1.20 | Rough | ||
| TNMG160412R K25P | 16.50 | 1.20 | Rough |
Tick the related products you wish to purchase and add to cart with this ISO Boring Bar.
Compare Products
You have no items to compare.
My Cart
You have no items in your shopping cart.
